[PATCH V9 5/6] arm64: dts: qcom: pm8008: Add base dts file

[Satya Priya]

Add base DTS file for pm8008 with infra and regulator nodes.

Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V9:
 - Add single dt file for pm8008 instead of adding files like in V8.

 arch/arm64/boot/dts/qcom/pm8008.dtsi | 47 ++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi
new file mode 100644
index 0000000..24bd832
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2022, The Linux Foundation. All rights reserved.
+
+&pm8008_bus {
+	pm8008: pm8008@8 {
+		compatible = "qcom,pm8008";
+		reg = <0x8>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	pm8008_regulators: pm8008@9 {
+		compatible = "qcom,pm8008-regulators";
+		reg = <0x9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		pm8008_l1: ldo1 {
+			regulator-name = "pm8008_l1";
+		};
+
+		pm8008_l2: ldo2 {
+			regulator-name = "pm8008_l2";
+		};
+
+		pm8008_l3: ldo3 {
+			regulator-name = "pm8008_l3";
+		};
+
+		pm8008_l4: ldo4 {
+			regulator-name = "pm8008_l4";
+		};
+
+		pm8008_l5: ldo5 {
+			regulator-name = "pm8008_l5";
+		};
+
+		pm8008_l6: ldo6 {
+			regulator-name = "pm8008_l6";
+		};
+
+		pm8008_l7: ldo7 {
+			regulator-name = "pm8008_l7";
+		};
+	};
+};
-- 
2.7.4