[PATCH V9 1/6] dt-bindings: mfd: pm8008: Add reset-gpios

[Satya Priya]

Add reset-gpios property for pm8008.

Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V7:
 - Removed the intermediate regulators node and added ldos
   directly under mfd node.

Changes in V8:
 - Change the compatible as per driver, remove interrupts from required
   properties, add reset-gpios and move regulators to separate binding.

Changes in V9:
 - Undo the changes from V8 and only add reset-gpios. Leave interrupts
   as required properties and do not change compatible.
   
 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c..3312784 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -44,6 +44,9 @@ properties:
   "#size-cells":
     const: 0
 
+  reset-gpios:
+    maxItems: 1
+
 patternProperties:
   "^gpio@[0-9a-f]+$":
     type: object
@@ -92,6 +95,7 @@ required:
   - "#address-cells"
   - "#size-cells"
   - "#interrupt-cells"
+  - reset-gpios
 
 additionalProperties: false
 
@@ -99,6 +103,7 @@ examples:
   - |
     #include <dt-bindings/mfd/qcom-pm8008.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
     qupv3_se13_i2c {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -113,6 +118,8 @@ examples:
         interrupt-parent = <&tlmm>;
         interrupts = <32 IRQ_TYPE_EDGE_RISING>;
 
+        reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_HIGH>;
+
         pm8008_gpios: gpio@c000 {
           compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
           reg = <0xc000>;
-- 
2.7.4