Re: [PATCH 1/1] soc/tegra: fuse: Add nvmem cell lookup entries for tegra194

From: Jon Hunter
Date: Tue Apr 05 2022 - 19:53:23 EST



On 24/03/2022 12:08, Sagar Kamble wrote:
Add nvmem cell lookup entries for below fuse cells:
- gcplex-config-fuse
- pdi0
- pdi1

Also include the device name prefix "gpu-" in the names of the gpu fuse
cells in nvmem_cell_info.

Signed-off-by: Sagar Kamble <skamble@xxxxxxxxxx>
---
drivers/soc/tegra/fuse/fuse-tegra.c | 8 ++++----
drivers/soc/tegra/fuse/fuse-tegra30.c | 17 ++++++++++++++++-
2 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index aa94fda282f4..b0a8405dbdb1 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2013-2021, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2013-2022, NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/clk.h>
@@ -162,7 +162,7 @@ static const struct nvmem_cell_info tegra_fuse_cells[] = {
.bit_offset = 0,
.nbits = 32,
}, {
- .name = "gcplex-config-fuse",
+ .name = "gpu-gcplex-config-fuse",
.offset = 0x1c8,
.bytes = 4,
.bit_offset = 0,
@@ -186,13 +186,13 @@ static const struct nvmem_cell_info tegra_fuse_cells[] = {
.bit_offset = 0,
.nbits = 32,
}, {
- .name = "pdi0",
+ .name = "gpu-pdi0",
.offset = 0x300,
.bytes = 4,
.bit_offset = 0,
.nbits = 32,
}, {
- .name = "pdi1",
+ .name = "gpu-pdi1",
.offset = 0x304,
.bytes = 4,
.bit_offset = 0,
diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index b071d433d74f..f01d8a2547b6 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2013-2022, NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/device.h>
@@ -344,6 +344,21 @@ static const struct nvmem_cell_lookup tegra194_fuse_lookups[] = {
.cell_name = "xusb-pad-calibration-ext",
.dev_id = "3520000.padctl",
.con_id = "calibration-ext",
+ }, {
+ .nvmem_name = "fuse",
+ .cell_name = "gpu-gcplex-config-fuse",
+ .dev_id = "17000000.gpu",
+ .con_id = "gcplex-config-fuse",
+ }, {
+ .nvmem_name = "fuse",
+ .cell_name = "gpu-pdi0",
+ .dev_id = "17000000.gpu",
+ .con_id = "pdi0",
+ }, {
+ .nvmem_name = "fuse",
+ .cell_name = "gpu-pdi1",
+ .dev_id = "17000000.gpu",
+ .con_id = "pdi1",
},
};

Thanks! Looks good to me.

Reviewed-by: Jon Hunter <jonathanh@xxxxxxxxxx>

Jon

--
nvpublic