Re: [PATCH v6 14/14] drm/msm/dsi: Add support for DSC configuration
From: Dmitry Baryshkov
Date: Tue Apr 05 2022 - 20:41:48 EST
On Mon, 4 Apr 2022 at 19:35, Vinod Koul <vkoul@xxxxxxxxxx> wrote:
>
> When DSC is enabled, we need to configure DSI registers accordingly and
> configure the respective stream compression registers.
>
> Add support to calculate the register setting based on DSC params and
> timing information and configure these registers.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/dsi/dsi_host.c | 98 +++++++++++++++++++++++++++++-
> 1 file changed, 97 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index eb0be34add45..f3ed6c40b9e1 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -912,6 +912,65 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
> dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0));
> }
>
> +static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mode, u32 hdisplay)
> +{
> + struct msm_display_dsc_config *dsc = msm_host->dsc;
> + u32 reg, intf_width, reg_ctrl, reg_ctrl2;
> + u32 slice_per_intf, total_bytes_per_intf;
> + u32 pkt_per_line;
> + u32 bytes_in_slice;
> + u32 eol_byte_num;
> +
> + /* first calculate dsc parameters and then program
> + * compress mode registers
> + */
> + intf_width = hdisplay;
> + slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
> +
> + /* If slice_per_pkt is greater than slice_per_intf
> + * then default to 1. This can happen during partial
> + * update.
> + */
> + if (slice_per_intf > dsc->drm->slice_count)
> + dsc->drm->slice_count = 1;
> +
> + slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
> + bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * dsc->drm->bits_per_pixel, 8);
> +
> + dsc->drm->slice_chunk_size = bytes_in_slice;
> +
> + total_bytes_per_intf = bytes_in_slice * slice_per_intf;
> +
> + eol_byte_num = total_bytes_per_intf % 3;
> + pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> +
> + if (is_cmd_mode) /* packet data type */
> + reg = DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);
> + else
> + reg = DSI_VIDEO_COMPRESSION_MODE_CTRL_DATATYPE(MIPI_DSI_COMPRESSED_PIXEL_STREAM);
> +
> + /* DSI_VIDEO_COMPRESSION_MODE & DSI_COMMAND_COMPRESSION_MODE
> + * registers have similar offsets, so for below common code use
> + * DSI_VIDEO_COMPRESSION_MODE_XXXX for setting bits
> + */
> + reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_PKT_PER_LINE(pkt_per_line >> 1);
> + reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EOL_BYTE_NUM(eol_byte_num);
> + reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EN;
> +
> + if (is_cmd_mode) {
> + reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
> + reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
> +
> + reg_ctrl |= reg;
> + reg_ctrl2 |= DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH(bytes_in_slice);
> +
> + dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
> + dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
> + } else {
> + dsi_write(msm_host, REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
> + }
> +}
> +
> static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> {
> struct drm_display_mode *mode = msm_host->mode;
> @@ -944,7 +1003,38 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> hdisplay /= 2;
> }
>
> + if (msm_host->dsc) {
> + struct msm_display_dsc_config *dsc = msm_host->dsc;
> +
> + /* update dsc params with timing params */
> + if (!dsc || !mode->hdisplay || !mode->vdisplay) {
> + pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n",
> + mode->hdisplay, mode->vdisplay);
> + return;
> + }
> +
> + dsc->drm->pic_width = mode->hdisplay;
> + dsc->drm->pic_height = mode->vdisplay;
> + DBG("Mode %dx%d\n", dsc->drm->pic_width, dsc->drm->pic_height);
> +
> + /* we do the calculations for dsc parameters here so that
> + * panel can use these parameters
> + */
> + dsi_populate_dsc_params(dsc);
> +
> + /* Divide the display by 3 but keep back/font porch and
> + * pulse width same
> + */
> + h_total -= hdisplay;
> + hdisplay /= 3;
> + h_total += hdisplay;
> + ha_end = ha_start + hdisplay;
> + }
> +
> if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
> + if (msm_host->dsc)
> + dsi_update_dsc_timing(msm_host, false, mode->hdisplay);
> +
> dsi_write(msm_host, REG_DSI_ACTIVE_H,
> DSI_ACTIVE_H_START(ha_start) |
> DSI_ACTIVE_H_END(ha_end));
> @@ -963,8 +1053,14 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
> DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
> } else { /* command mode */
> + if (msm_host->dsc)
> + dsi_update_dsc_timing(msm_host, true, mode->hdisplay);
> +
> /* image data and 1 byte write_memory_start cmd */
> - wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
> + if (!msm_host->dsc)
> + wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
> + else
> + wc = mode->hdisplay / 2 + 1;
>
> dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
> DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
> --
> 2.34.1
>
--
With best wishes
Dmitry