Re: [V3 0/3] arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold

[Doug Anderson]

Hi,

On Wed, Apr 6, 2022 at 12:16 AM Vijaya Krishna Nivarthi
<quic_vnivarth@xxxxxxxxxxx> wrote:
>
> WLAN rail was leaking power during RBSC/sleep even after turning BT off.
> Change sleep pinctrl configuration to handle same.
>
> ---
> v3: apply same change to active state and other sc7280*.dts* as well
> v2: used bias-bus-hold as per review comments
> v1: intial patch used bias-disable for sleep pinctrl in sc7280-idp only
> ---
>
> Vijaya Krishna Nivarthi (3):
>   arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
>   arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
>   arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
>
>  arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts | 12 ++++++------
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi                   | 12 ++++++------
>  arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi                 | 13 ++++++++-----
>  3 files changed, 20 insertions(+), 17 deletions(-)

Probably the subject of all the patches should be modified to talk
about what each patch is applying to. Having 3 identically named
patches is not ideal.

I'll let Bjorn chime in on whether he'd rather adjust the subject
himself or whether he'd rather you re-send. In any case, with the
subject modified then for all 3 patches:

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>