Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF

[Janusz Krzysztofik]

Dnia środa, 6 kwietnia 2022 15:21:49 CEST Aaro Koskinen pisze:
> Hi,
> 
> On Sat, Mar 26, 2022 at 10:17:49PM +0100, Janusz Krzysztofik wrote:
> > Dnia wtorek, 22 marca 2022 20:07:53 CET Aaro Koskinen pisze:
> > > On Tue, Mar 22, 2022 at 06:36:48PM +0200, Aaro Koskinen wrote:
> > > > Something is still broken. When doing kexec (using CCF kernel), the
> > > > kexec'ed kernel now hangs early (on 770):
> > > [...]
> > > > [    0.928863] calling  omap1_init_devices+0x0/0x2c @ 1
> > > 
> > > It hangs in omap_sram_reprogram_clock() (<- omap1_select_table_rate()
> > > <- omap1_clk_late_init()).
> > 
> > I've reviewed my changes but haven't found anything suspicious.
> 
> The below change is fixing the kexec boot. Based on the comment in the
> code, it seems this clock is needed for the SRAM to work.
> 
> diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
> index e33e11f826af..b8b4876ff935 100644
> --- a/arch/arm/mach-omap1/clock_data.c
> +++ b/arch/arm/mach-omap1/clock_data.c
> @@ -285,7 +285,7 @@ static struct omap1_clk tc1_ck = {
>   */
>  
>  static struct omap1_clk tc2_ck = {
> -	.hw.init	= CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, 0),
> +	.hw.init	= CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
>  	.ops		= &clkops_generic,
>  	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
>  	.enable_bit	= EN_TC2_CK,
> 
> A.
> 

Thank you Aaro.  Will you submit this as a separate fix, or should I submit 
v2 of my patch 4/4 with your fix included?

Thanks,
Janusz