[PATCH] bnx2x: Fix spelling mistake "regiser" -> "register"

[cgel . zte]

From: Lv Ruyi <lv.ruyi@xxxxxxxxxx>

There are some spelling mistakes in the comments for macro. Fix it.

Reported-by: Zeal Robot <zealci@xxxxxxxxxx>
Signed-off-by: Lv Ruyi <lv.ruyi@xxxxxxxxxx>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 881ac33fe914..4e9215bce4ad 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -2212,7 +2212,7 @@
  * MAC DA 2. The reset default is set to mask out all parameters.
  */
 #define NIG_REG_P0_LLH_PTP_PARAM_MASK				 0x187a0
-/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
+/* [RW 14] Mask register for the rules used in detecting PTP packets. Set
  * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
  * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
  * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
@@ -2381,7 +2381,7 @@
  * MAC DA 2. The reset default is set to mask out all parameters.
  */
 #define NIG_REG_P1_LLH_PTP_PARAM_MASK				 0x187c8
-/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
+/* [RW 14] Mask register for the rules used in detecting PTP packets. Set
  * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
  * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
  * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
@@ -2493,7 +2493,7 @@
  * MAC DA 2. The reset default is set to mask out all parameters.
  */
 #define NIG_REG_P0_TLLH_PTP_PARAM_MASK				 0x187f0
-/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
+/* [RW 14] Mask register for the rules used in detecting PTP packets. Set
  * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
  * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
  * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
@@ -2529,7 +2529,7 @@
  * MAC DA 2. The reset default is set to mask out all parameters.
  */
 #define NIG_REG_P1_TLLH_PTP_PARAM_MASK				 0x187f8
-/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
+/* [RW 14] Mask register for the rules used in detecting PTP packets. Set
  * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
  * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
  * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
-- 
2.25.1