Re: [regression]: xps13 9310 system freeze with kernel 5.17/5.18-rc1

[Thorsten Leemhuis]

[TLDR: I'm adding the regression report below to regzbot, the Linux
kernel regression tracking bot; all text you find below is compiled from
a few templates paragraphs you might have encountered already already
from similar mails.]

Hi, this is your Linux kernel regression tracker.

On 08.04.22 09:26, Dominik Förderer wrote:
> After switching from kernel 5.16 to 5.17/%.18-rc1 my system (dell xps13 9310)
> allways freezes short after boot with a cpu-soft lock.
> 
> A git bisect shows, that the Problem is caused by commit 9dcf6808b253 ath11k:
> add 11d scan offload support. Reverting this commit makes the problem going
> away.
> 
> There is also a bug report with further descriptions here: 
> 
> https://bugzilla.kernel.org/show_bug.cgi?id=215777

Thanks for the report.

CCing the regression mailing list, as it should be in the loop for all
regressions, as explained here:
https://www.kernel.org/doc/html/latest/admin-guide/reporting-issues.html

To be sure below issue doesn't fall through the cracks unnoticed, I'm
adding it to regzbot, my Linux kernel regression tracking bot:

#regzbot ^introduced 9dcf6808b253
#regzbot title net: wireless: ath11k: xps13 9310 freezes
#regzbot ignore-activity

If it turns out this isn't a regression, free free to remove it from the
tracking by sending a reply to this thread containing a paragraph like
"#regzbot invalid: reason why this is invalid" (without the quotes).

Reminder for developers: when fixing the issue, please add a 'Link:'
tags pointing to the report (the mail quoted above) using
lore.kernel.org/r/, as explained in
'Documentation/process/submitting-patches.rst' and
'Documentation/process/5.Posting.rst'. Regzbot needs them to
automatically connect reports with fixes, but they are useful in
general, too.

I'm sending this to everyone that got the initial report, to make
everyone aware of the tracking. I also hope that messages like this
motivate people to directly get at least the regression mailing list and
ideally even regzbot involved when dealing with regressions, as messages
like this wouldn't be needed then. And don't worry, if I need to send
other mails regarding this regression only relevant for regzbot I'll
send them to the regressions lists only (with a tag in the subject so
people can filter them away). With a bit of luck no such messages will
be needed anyway.

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)

P.S.: As the Linux kernel's regression tracker I'm getting a lot of
reports on my table. I can only look briefly into most of them and lack
knowledge about most of the areas they concern. I thus unfortunately
will sometimes get things wrong or miss something important. I hope
that's not the case here; if you think it is, don't hesitate to tell me
in a public reply, it's in everyone's interest to set the public record
straight.

-- 
Additional information about regzbot:

If you want to know more about regzbot, check out its web-interface, the
getting start guide, and the references documentation:

https://linux-regtracking.leemhuis.info/regzbot/
https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md
https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md

The last two documents will explain how you can interact with regzbot
yourself if your want to.

Hint for reporters: when reporting a regression it's in your interest to
CC the regression list and tell regzbot about the issue, as that ensures
the regression makes it onto the radar of the Linux kernel's regression
tracker -- that's in your interest, as it ensures your report won't fall
through the cracks unnoticed.

Hint for developers: you normally don't need to care about regzbot once
it's involved. Fix the issue as you normally would, just remember to
include 'Link:' tag in the patch descriptions pointing to all reports
about the issue. This has been expected from developers even before
regzbot showed up for reasons explained in
'Documentation/process/submitting-patches.rst' and
'Documentation/process/5.Posting.rst'.