Re: [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser

[Krzysztof Kozlowski]

On 09/04/2022 20:17, Mikhail Zhilkin wrote:
> 
> On 4/9/2022 9:04 PM, Mikhail Zhilkin wrote:
>>>>>> +required:
>>>>>> +  - compatible
>>>>> Missing reg.
>>>> reg isn't required. Parser can read partition offsets and sizes from
>>>> SC PART MAP table. Or do you mean something else?  All is ok
>>>> without reg definition in "Example" (except the warns that reg property
>>>> is missing).
>>> reg might not be required for current implementation but it is required
>>> by devicetree for every node with unit address. Do you expect here nodes
>>> without unit addresses?
>> Only "partitions" node has no unit address. All subnodes  have unit
>> addresses and therefore have to have reg property. I've just realized
>> that "fixed-partitions.yaml" is almost my case. It looks like I can
>> copy'n'paste  "required" and "*properties".
>> Do you mind if I don't reinvent the wheel and reuse this good
>> practice?
>>
>> Here's what I got (no any warnings appears):
> 
> 
> I'm sorry, Krzysztof & All. Here is the final one.

I am sorry, but you changed now a lot in the bindings and it looks
entirely different. Things previously being correct now are wrong, so
rather start from your old bindings...

> 
> ---
>  .../mtd/partitions/sercomm,sc-partitions.yaml | 78 +++++++++++++++++++
>  1 file changed, 78 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml
> 
> diff --git
> a/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml
> b/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml
> new file mode 100644
> index 000000000000..33172f0be92a
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id:
> http://devicetree.org/schemas/mtd/partitions/sercomm,sc-partitions.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sercomm Partitions
> +
> +description: |
> +  Sercomm is one of hardware manufacturers providing SoCs used in home
> routers.
> +  The Sercomm partition map table contains information about non-standard
> +  partition offsets and sizes (depending on the bad blocks presence and
> their
> +  locations). Partition map is used by many Sercomm-based Ralink
> devices (e.g.
> +  Beeline, Netgear).
> +
> +  The partition table should be a node named "partitions". Partitions
> are then
> +  defined as subnodes.
> +
> +maintainers:
> +  - Mikhail Zhilkin <csharper2005@xxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: sercomm,sc-partitions
> +
> +  "#address-cells": true
> +
> +  "#size-cells": true
> +
> +patternProperties:
> +  "@[0-9a-f]+$":
> +    $ref: "partition.yaml#"
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"

Still missing reg.

> +
> +additionalProperties: true

This is wrong, why it became true?


Best regards,
Krzysztof