Re: [PATCH] drm: rcar-du: Extend CMM HDSE documentation

From: Laurent Pinchart
Date: Sun Apr 10 2022 - 11:22:30 EST


Hi Kieran,

Thank you for the patch.

On Sat, Apr 09, 2022 at 07:57:06PM +0100, Kieran Bingham wrote:
> When the CMM is enabled, the HDSE offset is further adjusted to
> compensate for consumed pixels.
>
> Explain this further, with an extra comment at the point the offset is
> adjusted.
>
> Suggested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
> drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index f361a604337f..23e1aedf8dc0 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -300,6 +300,11 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
> | DSMR_DIPM_DISP | DSMR_CSPM;
> rcar_du_crtc_write(rcrtc, DSMR, dsmr);
>
> + /*
> + * When the CMM is enabled, an additional offset of 25 pixels must be
> + * subtracted from the HDS (horizontal display start) and HDE
> + * (horizontal display end) registers.
> + */
> hdse_offset = 19;
> if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2))
> hdse_offset += 25;

--
Regards,

Laurent Pinchart