[PATCH 06/10] drm/sun4i: Allow VI layers to be primary planes

[Samuel Holland]

D1's mixer 1 has no UI layers, only a single VI layer. That means the
mixer can only be used if the primary plane comes from this VI layer.
Add the code to handle this case, setting the mixer's global registers
in the same way as when the primary plane comes from a UI layer.

Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---

 drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 36 +++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
index bb7c43036dfa..86212cb2098c 100644
--- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
@@ -146,6 +146,36 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel,
 	insize = SUN8I_MIXER_SIZE(src_w, src_h);
 	outsize = SUN8I_MIXER_SIZE(dst_w, dst_h);
 
+	if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
+		bool interlaced = false;
+		u32 val;
+
+		DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n",
+				 dst_w, dst_h);
+		regmap_write(mixer->engine.regs,
+			     SUN8I_MIXER_GLOBAL_SIZE,
+			     outsize);
+		regmap_write(mixer->engine.regs,
+			     SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize);
+
+		if (state->crtc)
+			interlaced = state->crtc->state->adjusted_mode.flags
+				& DRM_MODE_FLAG_INTERLACE;
+
+		if (interlaced)
+			val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED;
+		else
+			val = 0;
+
+		regmap_update_bits(mixer->engine.regs,
+				   SUN8I_MIXER_BLEND_OUTCTL(bld_base),
+				   SUN8I_MIXER_BLEND_OUTCTL_INTERLACED,
+				   val);
+
+		DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n",
+				 interlaced ? "on" : "off");
+	}
+
 	/* Set height and width */
 	DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n",
 			 (state->src.x1 >> 16) & ~(format->hsub - 1),
@@ -542,6 +572,7 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm,
 					       struct sun8i_mixer *mixer,
 					       int index)
 {
+	enum drm_plane_type type = DRM_PLANE_TYPE_OVERLAY;
 	u32 supported_encodings, supported_ranges;
 	unsigned int plane_cnt, format_count;
 	struct sun8i_vi_layer *layer;
@@ -560,12 +591,15 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm,
 		format_count = ARRAY_SIZE(sun8i_vi_layer_formats);
 	}
 
+	if (!mixer->cfg->ui_num && index == 0)
+		type = DRM_PLANE_TYPE_PRIMARY;
+
 	/* possible crtcs are set later */
 	ret = drm_universal_plane_init(drm, &layer->plane, 0,
 				       &sun8i_vi_layer_funcs,
 				       formats, format_count,
 				       sun8i_layer_modifiers,
-				       DRM_PLANE_TYPE_OVERLAY, NULL);
+				       type, NULL);
 	if (ret) {
 		dev_err(drm->dev, "Couldn't initialize layer\n");
 		return ERR_PTR(ret);
-- 
2.35.1