[RFC PATCH v2 6/6] arm64: dts: qcom: sdm845: control RPMHPD performance states with UFS

[Krzysztof Kozlowski]

UFS, when scaling gears, should choose appropriate performance state of
RPMHPD power domain controller.  Since UFS belongs to UFS_PHY_GDSC power
domain, add necessary parent power domain to GCC.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 43 +++++++++++++++++++++-------
 1 file changed, 33 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b31bf62e8680..920e4b0c71cf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1078,6 +1078,7 @@ gcc: clock-controller@100000 {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SDM845_CX>;
 		};
 
 		qfprom@784000 {
@@ -2326,18 +2327,40 @@ ufs_mem_hc: ufshc@1d84000 {
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 300000000>;
 
+			operating-points-v2 = <&ufs_opp_table>;
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000
+						 0
+						 0
+						 37500000
+						 0
+						 0
+						 0
+						 0
+						 // FIXME: value 0 copied from freq-table-hz
+						 0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000
+						 0
+						 0
+						 150000000
+						 0
+						 0
+						 0
+						 0
+						 300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
-- 
2.32.0