[PATCH v3 0/9] iio: accel: bma400: Add buffer, step and activity/inactivity

[Jagath Jog J]

This patch series adds trigger buffer support with data ready interrupt,
separate channel for step counter, an event for step change interrupt,
activity recognition and activity/inactivity event support.

changes since v2
1. Reordering of header includes in the separate patch.
2. Matching the IIO syntax for multiline comment.
3. Following the preference in the interrupt handler for returning.
4. Add support for activity recognition.
5. Add support for debugfs to access registers from userspace.
6. Add support for activity and inactivity events

changes since v1
1. Added comment section that describes the math for scale calculation.
2. Added separate devm_add_action_or_reset() calls to disable regulator
   and to put the sensor in power down mode.
3. Remove the err_reg_disable and out, goto labels and returning directly
   if error occurs.
4. Added mutex calls while putting sensor in power down.
5. Added ___cacheline_aligned for device data.
6. Ordering the header includes.
7. Handling erroneous and spurious interrupts in the interrupt handler
   by returning IRQ_NONE.
8. Using dev_err_probe() instead of dev_err().
9. Configured the interrupt to open drain.
10. Using le16_to_cpu() to fix the sparse warning.
11. Checking the step change event is enabled or not.
12. Enabling the step change event will also enable the step channel.
13. Using FIELD_GET() instead of bitwise operation.
14. Removal of dead code in the _event_config().

Jagath Jog J (9):
  iio: accel: bma400: Fix the scale min and max macro values
  iio: accel: bma400: Reordering of header files
  iio: accel: bma400: conversion to device-managed function
  iio: accel: bma400: Add triggered buffer support
  iio: accel: bma400: Add separate channel for step counter
  iio: accel: bma400: Add step change event
  iio: accel: bma400: Add activity recognition support
  iio: accel: bma400: Add debugfs register access support
  iio: accel: bma400: Add support for activity and inactivity events

 drivers/iio/accel/Kconfig       |   2 +
 drivers/iio/accel/bma400.h      |  49 ++-
 drivers/iio/accel/bma400_core.c | 701 +++++++++++++++++++++++++++++---
 drivers/iio/accel/bma400_i2c.c  |  10 +-
 drivers/iio/accel/bma400_spi.c  |   8 +-
 5 files changed, 703 insertions(+), 67 deletions(-)

-- 
2.17.1