[PATCH v1 07/17] arm: dts: imx6qdl-vicut1.dtsi: Update GPIO line names

From: Oleksij Rempel
Date: Tue Apr 12 2022 - 05:30:12 EST


From: David Jander <david@xxxxxxxxxxx>

Add some missing names and remove names to pins that have never been used
and/or are not present on any hardware.

Signed-off-by: David Jander <david@xxxxxxxxxxx>
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index a5f962f1028b..a93e7f8302aa 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -257,12 +257,10 @@ &gpio1 {
gpio-line-names =
"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
"CAM2_MIRROR", "", "", "SMBALERT",
- "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3",
- "SDIO_D2", "SDIO_D1", "SDIO_D0",
+ "DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
- "SD1_DATA3", "", "",
- "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "",
- "WL_IRQ", "ETH_MDC";
+ "SD1_DATA3", "ETH_MDIO", "",
+ "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
};

&gpio2 {
@@ -270,8 +268,8 @@ &gpio2 {
"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
"", "LED_PWM", "", "", "",
"", "", "",
- "", "", "", "", "", "", "", "ON_SWITCH",
- "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", "";
+ "", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",
+ "POWER_LED", "", "", "", "", "", "", "";
};

&gpio3 {
@@ -280,7 +278,8 @@ &gpio3 {
"", "", "", "", "", "", "", "",
"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
- "", "", "", "", "", "", "", "";
+ "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+ "YACO_RESET";
};

&gpio4 {
@@ -288,8 +287,8 @@ &gpio4 {
"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
"CAN2_SR", "CAN2_TX", "CAN2_RX",
- "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "ON1_CTRL",
- "ON2_CTRL", "HITCH_IN_OUT",
+ "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+ "HITCH_IN_OUT",
"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
"ISB_LED";
};
--
2.30.2