Re: [PATCH 1/2] dt-bindings: hwmon: Add TMP401, TMP411 and TMP43x
From: Krzysztof Kozlowski
Date: Tue Apr 12 2022 - 08:33:34 EST
On 11/04/2022 12:03, Camel Guo wrote:
> From: Camel Guo <camelg@xxxxxxxx>
>
> Document the TMP401, TMP411 and TMP43x device devicetree bindings
>
> Signed-off-by: Camel Guo <camelg@xxxxxxxx>
> ---
> .../devicetree/bindings/hwmon/ti,tmp401.yaml | 111 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 112 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
>
Thank you for your patch. There is something to discuss/improve.
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
> new file mode 100644
> index 000000000000..28be5cbb009b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TMP401, TPM411 and TMP43x temperature sensor
> +
> +maintainers:
> + - Guenter Roeck <linux@xxxxxxxxxxxx>
> +
> +description: |
> + ±1°C Remote and Local temperature sensor
> +
> + Datasheets:
> + https://www.ti.com/lit/ds/symlink/tmp401.pdf
> + https://www.ti.com/lit/ds/symlink/tmp411.pdf
> + https://www.ti.com/lit/ds/symlink/tmp431.pdf
> + https://www.ti.com/lit/ds/symlink/tmp435.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - ti,tmp401
> + - ti,tmp411
> + - ti,tmp431
> + - ti,tmp432
> + - ti,tmp435
Blank line, please.
> + reg:
> + maxItems: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + ti,extended-range-enable:
> + description: |
No need for "|". Here and in most of other cases below.
> + When set, this sensor measures over extended temperature range.
> + type: boolean
> +
> + ti,n-factor:
> + description: |
> + The value (two's complement) to be programmed in the n-factor correction
> + register.
Do not describe the programming model (registers) but hardware property
instead.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + items:
> + minimum: 0
> + maximum: 255
> +
> + ti,beta-compensation:
> + description: |
> + The value to be programmed in the beta range register.
The same, register values should not be stored in DT.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + items:
> + minimum: 0
> + maximum: 15
> +
Best regards,
Krzysztof