[PATCH v6 4/7] net: phy: Add 10BASE-T1L support in phy-c45
From: alexandru.tachici
Date: Tue Apr 12 2022 - 09:14:15 EST
From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
This patch is needed because the BASE-T1 uses different registers
for status, control and advertisement to those already
employed in the existing phy-c45 functions.
Where required, genphy_c45 functions will now check whether
the device supports BASE-T1 and use the specific registers
instead: 45.2.7.19 BASE-T1 AN control register,
45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN
advertisement register, 45.2.7.22 BASE-T1 AN LP Base
Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control
register.
Tested-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Signed-off-by: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
---
drivers/net/phy/phy-c45.c | 257 ++++++++++++++++++++++++++++++++++-
drivers/net/phy/phy_device.c | 1 +
include/linux/mdio.h | 70 ++++++++++
include/linux/phy.h | 2 +
include/uapi/linux/mdio.h | 10 ++
5 files changed, 335 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index db709d30bf84..eefdd67d5556 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -8,6 +8,25 @@
#include <linux/mii.h>
#include <linux/phy.h>
+/**
+ * genphy_c45_baset1_able - checks if the PMA has BASE-T1 extended abilities
+ * @phydev: target phy_device struct
+ */
+static bool genphy_c45_baset1_able(struct phy_device *phydev)
+{
+ int val;
+
+ if (phydev->pma_extable == -ENODATA) {
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
+ if (val < 0)
+ return false;
+
+ phydev->pma_extable = val;
+ }
+
+ return !!(phydev->pma_extable & MDIO_PMA_EXTABLE_BT1);
+}
+
/**
* genphy_c45_pma_can_sleep - checks if the PMA have sleep support
* @phydev: target phy_device struct
@@ -80,7 +99,10 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
switch (phydev->speed) {
case SPEED_10:
- ctrl2 |= MDIO_PMA_CTRL2_10BT;
+ if (genphy_c45_baset1_able(phydev))
+ ctrl2 |= MDIO_PMA_CTRL2_BASET1;
+ else
+ ctrl2 |= MDIO_PMA_CTRL2_10BT;
break;
case SPEED_100:
ctrl1 |= MDIO_PMA_CTRL1_SPEED100;
@@ -118,10 +140,95 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
if (ret < 0)
return ret;
+ if (genphy_c45_baset1_able(phydev)) {
+ int ctl = 0;
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ ctl = MDIO_PMA_PMD_BT1_CTRL_CFG_MST;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ case MASTER_SLAVE_CFG_UNKNOWN:
+ case MASTER_SLAVE_CFG_UNSUPPORTED:
+ break;
+ default:
+ phydev_warn(phydev, "Unsupported Master/Slave mode\n");
+ return -EOPNOTSUPP;
+ }
+
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL,
+ MDIO_PMA_PMD_BT1_CTRL_CFG_MST, ctl);
+ if (ret < 0)
+ return ret;
+ }
+
return genphy_c45_an_disable_aneg(phydev);
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
+/* Sets master/slave preference and supported technologies.
+ * The preference is set in the BIT(4) of BASE-T1 AN
+ * advertisement register 7.515 and whether the status
+ * is forced or not, it is set in the BIT(12) of BASE-T1
+ * AN advertisement register 7.514.
+ * Sets 10BASE-T1L Ability BIT(14) in BASE-T1 autonegotiation
+ * advertisement register [31:16] if supported.
+ */
+static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
+{
+ int changed = 0;
+ u16 adv_l = 0;
+ u16 adv_m = 0;
+ int ret;
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ adv_l |= MDIO_AN_T1_ADV_L_FORCE_MS;
+ break;
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ break;
+ default:
+ break;
+ }
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ adv_m |= MDIO_AN_T1_ADV_M_MST;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ break;
+ default:
+ break;
+ }
+
+ adv_l |= linkmode_adv_to_mii_t1_adv_l_t(phydev->advertising);
+
+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L,
+ (MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP
+ | MDIO_AN_T1_ADV_L_PAUSE_ASYM), adv_l);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = 1;
+
+ adv_m |= linkmode_adv_to_mii_t1_adv_m_t(phydev->advertising);
+
+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M,
+ MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L, adv_m);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = 1;
+
+ return changed;
+}
+
/**
* genphy_c45_an_config_aneg - configure advertisement registers
* @phydev: target phy_device struct
@@ -141,6 +248,9 @@ int genphy_c45_an_config_aneg(struct phy_device *phydev)
changed = genphy_config_eee_advert(phydev);
+ if (genphy_c45_baset1_able(phydev))
+ return genphy_c45_baset1_an_config_aneg(phydev);
+
adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
@@ -178,8 +288,12 @@ EXPORT_SYMBOL_GPL(genphy_c45_an_config_aneg);
*/
int genphy_c45_an_disable_aneg(struct phy_device *phydev)
{
+ u16 reg = MDIO_CTRL1;
- return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+ if (genphy_c45_baset1_able(phydev))
+ reg = MDIO_AN_T1_CTRL;
+
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
}
EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
@@ -194,7 +308,12 @@ EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
*/
int genphy_c45_restart_aneg(struct phy_device *phydev)
{
- return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+ u16 reg = MDIO_CTRL1;
+
+ if (genphy_c45_baset1_able(phydev))
+ reg = MDIO_AN_T1_CTRL;
+
+ return phy_set_bits_mmd(phydev, MDIO_MMD_AN, reg,
MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
}
EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
@@ -210,11 +329,15 @@ EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
*/
int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
{
+ u16 reg = MDIO_CTRL1;
int ret;
+ if (genphy_c45_baset1_able(phydev))
+ reg = MDIO_AN_T1_CTRL;
+
if (!restart) {
/* Configure and restart aneg if it wasn't set before */
- ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
if (ret < 0)
return ret;
@@ -242,7 +365,13 @@ EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg);
*/
int genphy_c45_aneg_done(struct phy_device *phydev)
{
- int val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
+ int reg = MDIO_STAT1;
+ int val;
+
+ if (genphy_c45_baset1_able(phydev))
+ reg = MDIO_AN_T1_STAT;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0;
}
@@ -307,6 +436,49 @@ int genphy_c45_read_link(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(genphy_c45_read_link);
+/* Read the Clause 45 defined BASE-T1 AN (7.513) status register to check
+ * if autoneg is complete. If so read the BASE-T1 Autonegotiation
+ * Advertisement registers filling in the link partner advertisement,
+ * pause and asym_pause members in phydev.
+ */
+static int genphy_c45_baset1_read_lpa(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT);
+ if (val < 0)
+ return val;
+
+ if (!(val & MDIO_AN_STAT1_COMPLETE)) {
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising);
+ mii_t1_adv_l_mod_linkmode_t(phydev->lp_advertising, 0);
+ mii_t1_adv_m_mod_linkmode_t(phydev->lp_advertising, 0);
+
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ return 0;
+ }
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising, 1);
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_L);
+ if (val < 0)
+ return val;
+
+ mii_t1_adv_l_mod_linkmode_t(phydev->lp_advertising, val);
+ phydev->pause = val & MDIO_AN_T1_ADV_L_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = val & MDIO_AN_T1_ADV_L_PAUSE_ASYM ? 1 : 0;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_M);
+ if (val < 0)
+ return val;
+
+ mii_t1_adv_m_mod_linkmode_t(phydev->lp_advertising, val);
+
+ return 0;
+}
+
/**
* genphy_c45_read_lpa - read the link partner advertisement and pause
* @phydev: target phy_device struct
@@ -321,6 +493,9 @@ int genphy_c45_read_lpa(struct phy_device *phydev)
{
int val;
+ if (genphy_c45_baset1_able(phydev))
+ return genphy_c45_baset1_read_lpa(phydev);
+
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
if (val < 0)
return val;
@@ -399,6 +574,17 @@ int genphy_c45_read_pma(struct phy_device *phydev)
phydev->duplex = DUPLEX_FULL;
+ if (genphy_c45_baset1_able(phydev)) {
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL);
+ if (val < 0)
+ return val;
+
+ if (MDIO_PMA_PMD_BT1_CTRL_CFG_MST)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
+ else
+ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
@@ -530,12 +716,67 @@ int genphy_c45_pma_read_abilities(struct phy_device *phydev)
phydev->supported,
val & MDIO_PMA_NG_EXTABLE_5GBT);
}
+
+ if (val & MDIO_PMA_EXTABLE_BT1) {
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1);
+ if (val < 0)
+ return val;
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+ phydev->supported,
+ val & MDIO_PMA_PMD_BT1_B10L_ABLE);
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT);
+ if (val < 0)
+ return val;
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ phydev->supported,
+ val & MDIO_AN_STAT1_ABLE);
+ }
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities);
+/* Read master/slave preference from registers.
+ * The preference is read from the BIT(4) of BASE-T1 AN
+ * advertisement register 7.515 and whether the preference
+ * is forced or not, it is read from BASE-T1 AN advertisement
+ * register 7.514.
+ */
+static int genphy_c45_baset1_read_status(struct phy_device *phydev)
+{
+ int ret;
+ int cfg;
+
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L);
+ if (ret < 0)
+ return ret;
+
+ cfg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M);
+ if (cfg < 0)
+ return cfg;
+
+ if (ret & MDIO_AN_T1_ADV_L_FORCE_MS) {
+ if (cfg & MDIO_AN_T1_ADV_M_MST)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
+ } else {
+ if (cfg & MDIO_AN_T1_ADV_M_MST)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_PREFERRED;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_PREFERRED;
+ }
+
+ return 0;
+}
+
/**
* genphy_c45_read_status - read PHY status
* @phydev: target phy_device struct
@@ -560,6 +801,12 @@ int genphy_c45_read_status(struct phy_device *phydev)
if (ret)
return ret;
+ if (genphy_c45_baset1_able(phydev)) {
+ ret = genphy_c45_baset1_read_status(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
phy_resolve_aneg_linkmode(phydev);
} else {
ret = genphy_c45_read_pma(phydev);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8406ac739def..5edf44f6f276 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -599,6 +599,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
dev->autoneg = AUTONEG_ENABLE;
+ dev->pma_extable = -ENODATA;
dev->is_c45 = is_c45;
dev->phy_id = phy_id;
if (c45_ids)
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index ecac96d52e01..00177567cfef 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -340,6 +340,76 @@ static inline void mii_10gbt_stat_mod_linkmode_lpa_t(unsigned long *advertising,
advertising, lpa & MDIO_AN_10GBT_STAT_LP10G);
}
+/**
+ * mii_t1_adv_l_mod_linkmode_t
+ * @advertising: target the linkmode advertisement settings
+ * @lpa: value of the BASE-T1 Autonegotiation Advertisement [15:0] Register
+ *
+ * A small helper function that translates BASE-T1 Autonegotiation
+ * Advertisement [15:0] Register bits to linkmode advertisement settings.
+ * Other bits in advertising aren't changed.
+ */
+static inline void mii_t1_adv_l_mod_linkmode_t(unsigned long *advertising, u32 lpa)
+{
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising,
+ lpa & MDIO_AN_T1_ADV_L_PAUSE_CAP);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising,
+ lpa & MDIO_AN_T1_ADV_L_PAUSE_ASYM);
+}
+
+/**
+ * mii_t1_adv_m_mod_linkmode_t
+ * @advertising: target the linkmode advertisement settings
+ * @lpa: value of the BASE-T1 Autonegotiation Advertisement [31:16] Register
+ *
+ * A small helper function that translates BASE-T1 Autonegotiation
+ * Advertisement [31:16] Register bits to linkmode advertisement settings.
+ * Other bits in advertising aren't changed.
+ */
+static inline void mii_t1_adv_m_mod_linkmode_t(unsigned long *advertising, u32 lpa)
+{
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+ advertising, lpa & MDIO_AN_T1_ADV_M_B10L);
+}
+
+/**
+ * linkmode_adv_to_mii_t1_adv_l_t
+ * @advertising: the linkmode advertisement settings
+ *
+ * A small helper function that translates linkmode advertisement
+ * settings to phy autonegotiation advertisements for the
+ * BASE-T1 Autonegotiation Advertisement [15:0] Register.
+ */
+static inline u32 linkmode_adv_to_mii_t1_adv_l_t(unsigned long *advertising)
+{
+ u32 result = 0;
+
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising))
+ result |= MDIO_AN_T1_ADV_L_PAUSE_CAP;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising))
+ result |= MDIO_AN_T1_ADV_L_PAUSE_ASYM;
+
+ return result;
+}
+
+/**
+ * linkmode_adv_to_mii_t1_adv_m_t
+ * @advertising: the linkmode advertisement settings
+ *
+ * A small helper function that translates linkmode advertisement
+ * settings to phy autonegotiation advertisements for the
+ * BASE-T1 Autonegotiation Advertisement [31:16] Register.
+ */
+static inline u32 linkmode_adv_to_mii_t1_adv_m_t(unsigned long *advertising)
+{
+ u32 result = 0;
+
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, advertising))
+ result |= MDIO_AN_T1_ADV_M_B10L;
+
+ return result;
+}
+
int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum,
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 36ca2b5c2253..6c3048e2a3ce 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -698,6 +698,8 @@ struct phy_device {
u8 mdix;
u8 mdix_ctrl;
+ int pma_extable;
+
void (*phy_link_change)(struct phy_device *phydev, bool up);
void (*adjust_link)(struct net_device *dev);
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
index fa3515257f54..75b7257a51e1 100644
--- a/include/uapi/linux/mdio.h
+++ b/include/uapi/linux/mdio.h
@@ -70,6 +70,7 @@
#define MDIO_B10L_PMA_CTRL 2294 /* 10BASE-T1L PMA control */
#define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */
#define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */
+#define MDIO_PMA_PMD_BT1 18 /* BASE-T1 PMA/PMD extended ability */
#define MDIO_AN_T1_CTRL 512 /* BASE-T1 AN control */
#define MDIO_AN_T1_STAT 513 /* BASE-T1 AN status */
#define MDIO_AN_T1_ADV_L 514 /* BASE-T1 AN advertisement register [15:0] */
@@ -78,6 +79,7 @@
#define MDIO_AN_T1_LP_L 517 /* BASE-T1 AN LP Base Page ability register [15:0] */
#define MDIO_AN_T1_LP_M 518 /* BASE-T1 AN LP Base Page ability register [31:16] */
#define MDIO_AN_T1_LP_H 519 /* BASE-T1 AN LP Base Page ability register [47:32] */
+#define MDIO_PMA_PMD_BT1_CTRL 2100 /* BASE-T1 PMA/PMD control register */
/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
@@ -170,6 +172,7 @@
#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
#define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */
#define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */
+#define MDIO_PMA_CTRL2_BASET1 0x003D /* BASE-T1 type */
#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
@@ -223,6 +226,7 @@
#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
+#define MDIO_PMA_EXTABLE_BT1 0x0800 /* BASE-T1 ability */
#define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */
/* PHY XGXS lane state register. */
@@ -301,6 +305,9 @@
#define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */
#define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */
+/* BASE-T1 PMA/PMD extended ability register. */
+#define MDIO_PMA_PMD_BT1_B10L_ABLE 0x0004 /* 10BASE-T1L Ability */
+
/* BASE-T1 auto-negotiation advertisement register [15:0] */
#define MDIO_AN_T1_ADV_L_PAUSE_CAP ADVERTISE_PAUSE_CAP
#define MDIO_AN_T1_ADV_L_PAUSE_ASYM ADVERTISE_PAUSE_ASYM
@@ -333,6 +340,9 @@
#define MDIO_AN_T1_LP_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level LP Transmit Request */
#define MDIO_AN_T1_LP_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level LP Transmit Ability */
+/* BASE-T1 PMA/PMD control register */
+#define MDIO_PMA_PMD_BT1_CTRL_CFG_MST 0x4000 /* MASTER-SLAVE config value */
+
/* EEE Supported/Advertisement/LP Advertisement registers.
*
* EEE capability Register (3.20), Advertisement (7.60) and
--
2.25.1