Re: [PATCH 5.15 093/277] riscv: Fixed misaligned memory access. Fixed pointer comparison.

From: Michael T. Kloos
Date: Tue Apr 12 2022 - 11:08:42 EST

Next message: Michael T. Kloos: "Re: [PATCH 5.16 095/285] riscv: Fixed misaligned memory access. Fixed pointer comparison."
Previous message: Bean Huo: "Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap"
In reply to: Greg Kroah-Hartman: "[PATCH 5.15 093/277] riscv: Fixed misaligned memory access. Fixed pointer comparison."
Next in thread: Greg Kroah-Hartman: "[PATCH 5.15 147/277] drm/amdgpu: fix off by one in amdgpu_gfx_kiq_acquire()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Backporting to 5.15 looks good to me.

Michael

On Tue, 2022-04-12 at 08:28 +0200, Greg Kroah-Hartman wrote:
> From: Michael T. Kloos <michael@xxxxxxxxxxxxxxxx>
>
> [ Upstream commit 9d1f0ec9f71780e69ceb9d91697600c747d6e02e ]
>
> Rewrote the RISC-V memmove() assembly implementation. The
> previous implementation did not check memory alignment and it
> compared 2 pointers with a signed comparison. The misaligned
> memory access would cause the kernel to crash on systems that
> did not emulate it in firmware and did not support it in hardware.
> Firmware emulation is slow and may not exist. The RISC-V spec
> does not guarantee that support for misaligned memory accesses
> will exist. It should not be depended on.
>
> This patch now checks for XLEN granularity of co-alignment between
> the pointers. Failing that, copying is done by loading from the 2
> contiguous and naturally aligned XLEN memory locations containing
> the overlapping XLEN sized data to be copied. The data is shifted
> into the correct place and binary or'ed together on each
> iteration. The result is then stored into the corresponding
> naturally aligned XLEN sized location in the destination. For
> unaligned data at the terminations of the regions to be copied
> or for copies less than (2 * XLEN) in size, byte copy is used.
>
> This patch also now uses unsigned comparison for the pointers and
> migrates to the newer assembler annotations from the now deprecated
> ones.
>
> Signed-off-by: Michael T. Kloos <michael@xxxxxxxxxxxxxxxx>
> Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx>
> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
> ---
> arch/riscv/lib/memmove.S | 368 +++++++++++++++++++++++++++++++++------
> 1 file changed, 310 insertions(+), 58 deletions(-)
>
> diff --git a/arch/riscv/lib/memmove.S b/arch/riscv/lib/memmove.S
> index 07d1d2152ba5..e0609e1f0864 100644
> --- a/arch/riscv/lib/memmove.S
> +++ b/arch/riscv/lib/memmove.S
> @@ -1,64 +1,316 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2022 Michael T. Kloos <michael@xxxxxxxxxxxxxxxx>
> + */
>
> #include <linux/linkage.h>
> #include <asm/asm.h>
>
> -ENTRY(__memmove)
> -WEAK(memmove)
> - move t0, a0
> - move t1, a1
> -
> - beq a0, a1, exit_memcpy
> - beqz a2, exit_memcpy
> - srli t2, a2, 0x2
> -
> - slt t3, a0, a1
> - beqz t3, do_reverse
> -
> - andi a2, a2, 0x3
> - li t4, 1
> - beqz t2, byte_copy
> -
> -word_copy:
> - lw t3, 0(a1)
> - addi t2, t2, -1
> - addi a1, a1, 4
> - sw t3, 0(a0)
> - addi a0, a0, 4
> - bnez t2, word_copy
> - beqz a2, exit_memcpy
> - j byte_copy
> -
> -do_reverse:
> - add a0, a0, a2
> - add a1, a1, a2
> - andi a2, a2, 0x3
> - li t4, -1
> - beqz t2, reverse_byte_copy
> -
> -reverse_word_copy:
> - addi a1, a1, -4
> - addi t2, t2, -1
> - lw t3, 0(a1)
> - addi a0, a0, -4
> - sw t3, 0(a0)
> - bnez t2, reverse_word_copy
> - beqz a2, exit_memcpy
> -
> -reverse_byte_copy:
> - addi a0, a0, -1
> - addi a1, a1, -1
> +SYM_FUNC_START(__memmove)
> +SYM_FUNC_START_WEAK(memmove)
> + /*
> + * Returns
> + * a0 - dest
> + *
> + * Parameters
> + * a0 - Inclusive first byte of dest
> + * a1 - Inclusive first byte of src
> + * a2 - Length of copy n
> + *
> + * Because the return matches the parameter register a0,
> + * we will not clobber or modify that register.
> + *
> + * Note: This currently only works on little-endian.
> + * To port to big-endian, reverse the direction of shifts
> + * in the 2 misaligned fixup copy loops.
> + */
>
> + /* Return if nothing to do */
> + beq a0, a1, return_from_memmove
> + beqz a2, return_from_memmove
> +
> + /*
> + * Register Uses
> + * Forward Copy: a1 - Index counter of src
> + * Reverse Copy: a4 - Index counter of src
> + * Forward Copy: t3 - Index counter of dest
> + * Reverse Copy: t4 - Index counter of dest
> + * Both Copy Modes: t5 - Inclusive first multibyte/aligned of dest
> + * Both Copy Modes: t6 - Non-Inclusive last multibyte/aligned of dest
> + * Both Copy Modes: t0 - Link / Temporary for load-store
> + * Both Copy Modes: t1 - Temporary for load-store
> + * Both Copy Modes: t2 - Temporary for load-store
> + * Both Copy Modes: a5 - dest to src alignment offset
> + * Both Copy Modes: a6 - Shift ammount
> + * Both Copy Modes: a7 - Inverse Shift ammount
> + * Both Copy Modes: a2 - Alternate breakpoint for unrolled loops
> + */
> +
> + /*
> + * Solve for some register values now.
> + * Byte copy does not need t5 or t6.
> + */
> + mv t3, a0
> + add t4, a0, a2
> + add a4, a1, a2
> +
> + /*
> + * Byte copy if copying less than (2 * SZREG) bytes. This can
> + * cause problems with the bulk copy implementation and is
> + * small enough not to bother.
> + */
> + andi t0, a2, -(2 * SZREG)
> + beqz t0, byte_copy
> +
> + /*
> + * Now solve for t5 and t6.
> + */
> + andi t5, t3, -SZREG
> + andi t6, t4, -SZREG
> + /*
> + * If dest(Register t3) rounded down to the nearest naturally
> + * aligned SZREG address, does not equal dest, then add SZREG
> + * to find the low-bound of SZREG alignment in the dest memory
> + * region. Note that this could overshoot the dest memory
> + * region if n is less than SZREG. This is one reason why
> + * we always byte copy if n is less than SZREG.
> + * Otherwise, dest is already naturally aligned to SZREG.
> + */
> + beq t5, t3, 1f
> + addi t5, t5, SZREG
> + 1:
> +
> + /*
> + * If the dest and src are co-aligned to SZREG, then there is
> + * no need for the full rigmarole of a full misaligned fixup copy.
> + * Instead, do a simpler co-aligned copy.
> + */
> + xor t0, a0, a1
> + andi t1, t0, (SZREG - 1)
> + beqz t1, coaligned_copy
> + /* Fall through to misaligned fixup copy */
> +
> +misaligned_fixup_copy:
> + bltu a1, a0, misaligned_fixup_copy_reverse
> +
> +misaligned_fixup_copy_forward:
> + jal t0, byte_copy_until_aligned_forward
> +
> + andi a5, a1, (SZREG - 1) /* Find the alignment offset of src (a1) */
> + slli a6, a5, 3 /* Multiply by 8 to convert that to bits to shift */
> + sub a5, a1, t3 /* Find the difference between src and dest */
> + andi a1, a1, -SZREG /* Align the src pointer */
> + addi a2, t6, SZREG /* The other breakpoint for the unrolled loop*/
> +
> + /*
> + * Compute The Inverse Shift
> + * a7 = XLEN - a6 = XLEN + -a6
> + * 2s complement negation to find the negative: -a6 = ~a6 + 1
> + * Add that to XLEN. XLEN = SZREG * 8.
> + */
> + not a7, a6
> + addi a7, a7, (SZREG * 8 + 1)
> +
> + /*
> + * Fix Misalignment Copy Loop - Forward
> + * load_val0 = load_ptr[0];
> + * do {
> + * load_val1 = load_ptr[1];
> + * store_ptr += 2;
> + * store_ptr[0 - 2] = (load_val0 >> {a6}) | (load_val1 << {a7});
> + *
> + * if (store_ptr == {a2})
> + * break;
> + *
> + * load_val0 = load_ptr[2];
> + * load_ptr += 2;
> + * store_ptr[1 - 2] = (load_val1 >> {a6}) | (load_val0 << {a7});
> + *
> + * } while (store_ptr != store_ptr_end);
> + * store_ptr = store_ptr_end;
> + */
> +
> + REG_L t0, (0 * SZREG)(a1)
> + 1:
> + REG_L t1, (1 * SZREG)(a1)
> + addi t3, t3, (2 * SZREG)
> + srl t0, t0, a6
> + sll t2, t1, a7
> + or t2, t0, t2
> + REG_S t2, ((0 * SZREG) - (2 * SZREG))(t3)
> +
> + beq t3, a2, 2f
> +
> + REG_L t0, (2 * SZREG)(a1)
> + addi a1, a1, (2 * SZREG)
> + srl t1, t1, a6
> + sll t2, t0, a7
> + or t2, t1, t2
> + REG_S t2, ((1 * SZREG) - (2 * SZREG))(t3)
> +
> + bne t3, t6, 1b
> + 2:
> + mv t3, t6 /* Fix the dest pointer in case the loop was broken */
> +
> + add a1, t3, a5 /* Restore the src pointer */
> + j byte_copy_forward /* Copy any remaining bytes */
> +
> +misaligned_fixup_copy_reverse:
> + jal t0, byte_copy_until_aligned_reverse
> +
> + andi a5, a4, (SZREG - 1) /* Find the alignment offset of src (a4) */
> + slli a6, a5, 3 /* Multiply by 8 to convert that to bits to shift */
> + sub a5, a4, t4 /* Find the difference between src and dest */
> + andi a4, a4, -SZREG /* Align the src pointer */
> + addi a2, t5, -SZREG /* The other breakpoint for the unrolled loop*/
> +
> + /*
> + * Compute The Inverse Shift
> + * a7 = XLEN - a6 = XLEN + -a6
> + * 2s complement negation to find the negative: -a6 = ~a6 + 1
> + * Add that to XLEN. XLEN = SZREG * 8.
> + */
> + not a7, a6
> + addi a7, a7, (SZREG * 8 + 1)
> +
> + /*
> + * Fix Misalignment Copy Loop - Reverse
> + * load_val1 = load_ptr[0];
> + * do {
> + * load_val0 = load_ptr[-1];
> + * store_ptr -= 2;
> + * store_ptr[1] = (load_val0 >> {a6}) | (load_val1 << {a7});
> + *
> + * if (store_ptr == {a2})
> + * break;
> + *
> + * load_val1 = load_ptr[-2];
> + * load_ptr -= 2;
> + * store_ptr[0] = (load_val1 >> {a6}) | (load_val0 << {a7});
> + *
> + * } while (store_ptr != store_ptr_end);
> + * store_ptr = store_ptr_end;
> + */
> +
> + REG_L t1, ( 0 * SZREG)(a4)
> + 1:
> + REG_L t0, (-1 * SZREG)(a4)
> + addi t4, t4, (-2 * SZREG)
> + sll t1, t1, a7
> + srl t2, t0, a6
> + or t2, t1, t2
> + REG_S t2, ( 1 * SZREG)(t4)
> +
> + beq t4, a2, 2f
> +
> + REG_L t1, (-2 * SZREG)(a4)
> + addi a4, a4, (-2 * SZREG)
> + sll t0, t0, a7
> + srl t2, t1, a6
> + or t2, t0, t2
> + REG_S t2, ( 0 * SZREG)(t4)
> +
> + bne t4, t5, 1b
> + 2:
> + mv t4, t5 /* Fix the dest pointer in case the loop was broken */
> +
> + add a4, t4, a5 /* Restore the src pointer */
> + j byte_copy_reverse /* Copy any remaining bytes */
> +
> +/*
> + * Simple copy loops for SZREG co-aligned memory locations.
> + * These also make calls to do byte copies for any unaligned
> + * data at their terminations.
> + */
> +coaligned_copy:
> + bltu a1, a0, coaligned_copy_reverse
> +
> +coaligned_copy_forward:
> + jal t0, byte_copy_until_aligned_forward
> +
> + 1:
> + REG_L t1, ( 0 * SZREG)(a1)
> + addi a1, a1, SZREG
> + addi t3, t3, SZREG
> + REG_S t1, (-1 * SZREG)(t3)
> + bne t3, t6, 1b
> +
> + j byte_copy_forward /* Copy any remaining bytes */
> +
> +coaligned_copy_reverse:
> + jal t0, byte_copy_until_aligned_reverse
> +
> + 1:
> + REG_L t1, (-1 * SZREG)(a4)
> + addi a4, a4, -SZREG
> + addi t4, t4, -SZREG
> + REG_S t1, ( 0 * SZREG)(t4)
> + bne t4, t5, 1b
> +
> + j byte_copy_reverse /* Copy any remaining bytes */
> +
> +/*
> + * These are basically sub-functions within the function. They
> + * are used to byte copy until the dest pointer is in alignment.
> + * At which point, a bulk copy method can be used by the
> + * calling code. These work on the same registers as the bulk
> + * copy loops. Therefore, the register values can be picked
> + * up from where they were left and we avoid code duplication
> + * without any overhead except the call in and return jumps.
> + */
> +byte_copy_until_aligned_forward:
> + beq t3, t5, 2f
> + 1:
> + lb t1, 0(a1)
> + addi a1, a1, 1
> + addi t3, t3, 1
> + sb t1, -1(t3)
> + bne t3, t5, 1b
> + 2:
> + jalr zero, 0x0(t0) /* Return to multibyte copy loop */
> +
> +byte_copy_until_aligned_reverse:
> + beq t4, t6, 2f
> + 1:
> + lb t1, -1(a4)
> + addi a4, a4, -1
> + addi t4, t4, -1
> + sb t1, 0(t4)
> + bne t4, t6, 1b
> + 2:
> + jalr zero, 0x0(t0) /* Return to multibyte copy loop */
> +
> +/*
> + * Simple byte copy loops.
> + * These will byte copy until they reach the end of data to copy.
> + * At that point, they will call to return from memmove.
> + */
> byte_copy:
> - lb t3, 0(a1)
> - addi a2, a2, -1
> - sb t3, 0(a0)
> - add a1, a1, t4
> - add a0, a0, t4
> - bnez a2, byte_copy
> -
> -exit_memcpy:
> - move a0, t0
> - move a1, t1
> - ret
> -END(__memmove)
> + bltu a1, a0, byte_copy_reverse
> +
> +byte_copy_forward:
> + beq t3, t4, 2f
> + 1:
> + lb t1, 0(a1)
> + addi a1, a1, 1
> + addi t3, t3, 1
> + sb t1, -1(t3)
> + bne t3, t4, 1b
> + 2:
> + ret
> +
> +byte_copy_reverse:
> + beq t4, t3, 2f
> + 1:
> + lb t1, -1(a4)
> + addi a4, a4, -1
> + addi t4, t4, -1
> + sb t1, 0(t4)
> + bne t4, t3, 1b
> + 2:
> +
> +return_from_memmove:
> + ret
> +
> +SYM_FUNC_END(memmove)
> +SYM_FUNC_END(__memmove)

Next message: Michael T. Kloos: "Re: [PATCH 5.16 095/285] riscv: Fixed misaligned memory access. Fixed pointer comparison."
Previous message: Bean Huo: "Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap"
In reply to: Greg Kroah-Hartman: "[PATCH 5.15 093/277] riscv: Fixed misaligned memory access. Fixed pointer comparison."
Next in thread: Greg Kroah-Hartman: "[PATCH 5.15 147/277] drm/amdgpu: fix off by one in amdgpu_gfx_kiq_acquire()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]