Re: [PATCH v6 resend 2/5] phy: Add LVDS configuration options

[Liu Ying]

Hi Vinod,

On Wed, 2022-04-13 at 11:41 +0530, Vinod Koul wrote:
> On 02-04-22, 13:24, Liu Ying wrote:
> > This patch allows LVDS PHYs to be configured through
> > the generic functions and through a custom structure
> > added to the generic union.
> > 
> > The parameters added here are based on common LVDS PHY
> > implementation practices.  The set of parameters
> > should cover all potential users.
> > 
> > Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
> > Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> > Cc: NXP Linux Team <linux-imx@xxxxxxx>
> > Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> > ---
> > v5->v6:
> > * Rebase upon v5.17-rc1.
> > 
> > v4->v5:
> > * Align kernel-doc style to include/linux/phy/phy.h. (Vinod)
> > * Trivial tweaks.
> > * Drop Robert's R-b tag.
> > 
> > v3->v4:
> > * Add Robert's R-b tag.
> > 
> > v2->v3:
> > * No change.
> > 
> > v1->v2:
> > * No change.
> > 
> >  include/linux/phy/phy-lvds.h | 32 ++++++++++++++++++++++++++++++++
> >  include/linux/phy/phy.h      |  4 ++++
> >  2 files changed, 36 insertions(+)
> >  create mode 100644 include/linux/phy/phy-lvds.h
> > 
> > diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-
> > lvds.h
> > new file mode 100644
> > index 000000000000..7a2f4747f624
> > --- /dev/null
> > +++ b/include/linux/phy/phy-lvds.h
> > @@ -0,0 +1,32 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright 2020 NXP
> 
> 2022 now

I may change it to 'Copyright 2020,2022 NXP'.

> 
> > + */
> > +
> > +#ifndef __PHY_LVDS_H_
> > +#define __PHY_LVDS_H_
> > +
> > +/**
> > + * struct phy_configure_opts_lvds - LVDS configuration set
> > + * @bits_per_lane_and_dclk_cycle:	Number of bits per data lane
> > and
> > + *					differential clock cycle.
> 
> What does it mean by bits per data lane and differential clock cycle?

Please check Documentation/devicetree/bindings/display/panel/lvds.yaml.
lvds.yaml metions slot.  'bits_per_lane_and_dclk_cycle' means the
number of slots.  But, I don't find the word 'slot' in my lvds relevant
specs which mentioned in lvds.yaml, so 'slots' is probably not a
generic name(lvds.yaml is for display panel).  So, I use
'bits_per_lane_and_dclk_cycle' as the name tells what it means.

> 
> > + * @differential_clk_rate:		Clock rate, in Hertz, of the
> > LVDS
> > + *					differential clock.
> > + * @lanes:				Number of active, consecutive,
> > + *					data lanes, starting from lane
> > 0,
> > + *					used for the transmissions.
> > + * @is_slave:				Boolean, true if the
> > phy is a slave
> > + *					which works together with a
> > master
> > + *					phy to support dual link
> > transmission,
> > + *					otherwise a regular phy or a
> > master phy.
> > + *
> > + * This structure is used to represent the configuration state of
> > a LVDS phy.
> > + */
> > +struct phy_configure_opts_lvds {
> > +	unsigned int	bits_per_lane_and_dclk_cycle;
> > +	unsigned long	differential_clk_rate;
> > +	unsigned int	lanes;
> > +	bool		is_slave;
> > +};
> 
> Where is the user of this new configuration? Can you post that patch
> for
> reference as well please

Patch 5/5 uses it. Also, I posted two drm bridge drivers[1][2] which
use it.

[1] 
https://patchwork.kernel.org/project/dri-devel/patch/1617172405-12962-13-git-send-email-victor.liu@xxxxxxx/
[2] 
https://patchwork.kernel.org/project/dri-devel/patch/1617172405-12962-14-git-send-email-victor.liu@xxxxxxx/

Regards,
Liu Ying