Re: AMDGPU: regression on 5.17.1

From: Alex Deucher
Date: Wed Apr 13 2022 - 14:15:06 EST

Next message: Nathan Chancellor: "[PATCH] arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang"
Previous message: Andy Shevchenko: "[PATCH v1 1/1] iio: light: tsl2772: Make use of device properties"
In reply to: Michele Ballabio: "Re: AMDGPU: regression on 5.17.1"
Next in thread: Michele Ballabio: "Re: AMDGPU: regression on 5.17.1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Apr 13, 2022 at 1:33 PM Michele Ballabio <ballabio.m@xxxxxxxxx> wrote:
>
> On Mon, 11 Apr 2022 14:34:37 -0400
> Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
>
> > On Sat, Apr 9, 2022 at 12:28 PM Michele Ballabio
> > <ballabio.m@xxxxxxxxx> wrote:
> > >
> > > On Tue, 5 Apr 2022 10:23:16 -0400
> > > Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
> > >
> > > > On Mon, Apr 4, 2022 at 3:39 PM Michele Ballabio
> > > > <ballabio.m@xxxxxxxxx> wrote:
> > > > >
> > > > > On Mon, 4 Apr 2022 13:03:41 -0400
> > > > > Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
> > > > >
> > > > > > On Sun, Apr 3, 2022 at 10:19 AM Michele Ballabio
> > > > > > <ballabio.m@xxxxxxxxx> wrote:
> > > > > > >
> > > > > > > Hi,
> > > > > > > I've hit a regression on 5.17.1 (haven't tested
> > > > > > > 5.17.0, but 5.16-stable didn't have this problem).
> > > > > > >
> > > > > > > The machine is a Ryzen 5 1600 with AMD graphics (RX 560).
> > > > > > >
> > > > > > > The regression I hit seems to trigger when the machine is
> > > > > > > left idle at boot (I don't boot straight to X, I boot to a
> > > > > > > tty, login and then start X). The machine after a while
> > > > > > > blanks the screen. Usually, the screen unblanks as the
> > > > > > > keyboard is hit or the mouse moves, but with kernel 5.17.1
> > > > > > > the screen does not wake up. The machine seems to run
> > > > > > > mostly fine: I can login from ssh, but I cannot reboot or
> > > > > > > halt it: a sysrq sequence is needed for that. Note that if
> > > > > > > the screen goes blank under X, it wakes up fine.
> > > > > > >
> > > > > > > Below a dmesg and two traces from syslog (they're quite
> > > > > > > similar).
> > > > > >
> > > > > > Can you bisect? Does setting amdgpu.runpm=0 help?
> > > > >
> > > > > I can try to bisect, should I narrow the search to
> > > > > drivers/gpu/drm/ ?
> > > >
> > > > I would just do a full bisect if possible in case the change
> > > > happens to be outside of drm.
> > > >
> > > > >
> > > > > Setting amdgpu.runpm=0 works, the display now unblanks without
> > > > > problems.
> > > >
> > >
> > > Hi,
> > > I bisected this, and the first bad commit is
> > > [087451f372bf76d971184caa258807b7c35aac8f] drm/amdgpu: use generic
> > > fb helpers instead of setting up AMD own's.
> > >
> > > Let me know if you need some more testing.
> >
> > Thanks. Do the attached patches fix the issue?
> >
> > Thanks,
> >
> > Alex
>
> Sorry, no. I applied them both on top of 5.17.1.

Thanks. Please try the attached patch.

Thanks,

Alex

> I'm pasting the output of dmesg and decode_stacktrace.sh:
>
> dmesg:
> -------
>
> [ 0.000000] Linux version 5.17.1+ (mike@xxxxxxxxxxxxxxxxxxxx) (gcc (GCC) 11.2.0, GNU ld version 2.38-slack151) #221 SMP PREEMPT Wed Apr 13 18:51:36 CEST 2022
> [ 0.000000] Command line: BOOT_IMAGE=bzImage ro root=806 debug
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
> [ 0.000000] signal: max sigframe size: 1776
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009bfffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000009c00000-0x0000000009ffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000d4434fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000d4435000-0x00000000d444ffff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000d4450000-0x00000000da830fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000da831000-0x00000000da970fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000da971000-0x00000000da97afff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000da97b000-0x00000000daa82fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000daa83000-0x00000000dae3efff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000dae3f000-0x00000000db93efff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000db93f000-0x00000000ddffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 3.1.1 present.
> [ 0.000000] DMI: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4011 04/19/2018
> [ 0.000000] tsc: Fast TSC calibration failed
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] last_pfn = 0x41f380 max_arch_pfn = 0x400000000
> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
> [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
> [ 0.000000] last_pfn = 0xde000 max_arch_pfn = 0x400000000
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
> [ 0.000000] ACPI: XSDT 0x00000000D4435098 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI: FACP 0x00000000D443FAC0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20211217/tbfadt-615)
> [ 0.000000] ACPI: DSDT 0x00000000D44351D0 00A8EA (v02 ALASKA A M I 01072009 INTL 20120913)
> [ 0.000000] ACPI: FACS 0x00000000DAE27E00 000040
> [ 0.000000] ACPI: APIC 0x00000000D443FBD8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI: FPDT 0x00000000D443FCB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI: FIDT 0x00000000D443FD00 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI: SSDT 0x00000000D444E140 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
> [ 0.000000] ACPI: SSDT 0x00000000D443FDF8 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
> [ 0.000000] ACPI: SSDT 0x00000000D4448A90 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001)
> [ 0.000000] ACPI: CRAT 0x00000000D444A4E8 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001)
> [ 0.000000] ACPI: CDIT 0x00000000D444B0B8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
> [ 0.000000] ACPI: SSDT 0x00000000D444B0E8 002DA8 (v01 AMD AMD AOD 00000001 INTL 20120913)
> [ 0.000000] ACPI: MCFG 0x00000000D444DE90 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
> [ 0.000000] ACPI: HPET 0x00000000D444DED0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
> [ 0.000000] ACPI: SSDT 0x00000000D444DF08 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
> [ 0.000000] ACPI: UEFI 0x00000000D444DF30 000042 (v01 00000000 00000000)
> [ 0.000000] ACPI: IVRS 0x00000000D444DF78 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
> [ 0.000000] ACPI: SSDT 0x00000000D444E048 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
> [ 0.000000] ACPI: Reserving FACP table memory at [mem 0xd443fac0-0xd443fbd3]
> [ 0.000000] ACPI: Reserving DSDT table memory at [mem 0xd44351d0-0xd443fab9]
> [ 0.000000] ACPI: Reserving FACS table memory at [mem 0xdae27e00-0xdae27e3f]
> [ 0.000000] ACPI: Reserving APIC table memory at [mem 0xd443fbd8-0xd443fcb5]
> [ 0.000000] ACPI: Reserving FPDT table memory at [mem 0xd443fcb8-0xd443fcfb]
> [ 0.000000] ACPI: Reserving FIDT table memory at [mem 0xd443fd00-0xd443fd9b]
> [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd444e140-0xd444fb80]
> [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd443fdf8-0xd4448a8f]
> [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd4448a90-0xd444a4e7]
> [ 0.000000] ACPI: Reserving CRAT table memory at [mem 0xd444a4e8-0xd444b0b7]
> [ 0.000000] ACPI: Reserving CDIT table memory at [mem 0xd444b0b8-0xd444b0e0]
> [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd444b0e8-0xd444de8f]
> [ 0.000000] ACPI: Reserving MCFG table memory at [mem 0xd444de90-0xd444decb]
> [ 0.000000] ACPI: Reserving HPET table memory at [mem 0xd444ded0-0xd444df07]
> [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd444df08-0xd444df2b]
> [ 0.000000] ACPI: Reserving UEFI table memory at [mem 0xd444df30-0xd444df71]
> [ 0.000000] ACPI: Reserving IVRS table memory at [mem 0xd444df78-0xd444e047]
> [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd444e048-0xd444e13f]
> [ 0.000000] system APIC only can use physical flat
> [ 0.000000] Setting APIC routing to physical flat.
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
> [ 0.000000] NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff]
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff]
> [ 0.000000] Device empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
> [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff]
> [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009bfffff]
> [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff]
> [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000d4434fff]
> [ 0.000000] node 0: [mem 0x00000000d4450000-0x00000000da830fff]
> [ 0.000000] node 0: [mem 0x00000000da97b000-0x00000000daa82fff]
> [ 0.000000] node 0: [mem 0x00000000db93f000-0x00000000ddffffff]
> [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
> [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
> [ 0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
> [ 0.000000] On node 0, zone DMA32: 10 pages in unavailable ranges
> [ 0.000000] On node 0, zone DMA32: 1024 pages in unavailable ranges
> [ 0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
> [ 0.000000] On node 0, zone DMA32: 27 pages in unavailable ranges
> [ 0.000000] On node 0, zone DMA32: 330 pages in unavailable ranges
> [ 0.000000] On node 0, zone DMA32: 3772 pages in unavailable ranges
> [ 0.000000] On node 0, zone Normal: 8192 pages in unavailable ranges
> [ 0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] system APIC only can use physical flat
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
> [ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [ 0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x04000000-0x04009fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c00000-0x09ffffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd4435000-0xd444ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xda831000-0xda970fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xda971000-0xda97afff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdaa83000-0xdae3efff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdae3f000-0xdb93efff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xde000000-0xdfffffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
> [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
> [ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
> [ 0.000000] percpu: Embedded 59 pages/cpu s204800 r8192 d28672 u262144
> [ 0.000000] pcpu-alloc: s204800 r8192 d28672 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
> [ 0.000000] Fallback order for Node 0: 0
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4112184
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=bzImage ro root=806 debug
> [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=bzImage", will be passed to user space.
> [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Memory: 16301444K/16710468K available (22542K kernel code, 3541K rwdata, 9392K rodata, 1884K init, 4236K bss, 408764K reserved, 0K cma-reserved)
> [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x28/0x530 with crng_init=0
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
> [ 0.000000] ftrace: allocating 63796 entries in 250 pages
> [ 0.000000] ftrace: allocated 250 pages with 6 groups
> [ 0.000000] Dynamic Preempt: full
> [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
> [ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
> [ 0.000000] Trampoline variant of Tasks RCU enabled.
> [ 0.000000] Rude variant of Tasks RCU enabled.
> [ 0.000000] Tracing variant of Tasks RCU enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
> [ 0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
> [ 0.000000] random: crng init done (trusting CPU's manufacturer)
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] printk: console [tty0] enabled
> [ 0.000000] ACPI: Core revision 20211217
> [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
> [ 0.000000] APIC: Switch to symmetric I/O mode setup
> [ 0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.007000] tsc: PIT calibration matches HPET. 1 loops
> [ 0.007000] tsc: Detected 3193.623 MHz processor
> [ 0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e08c1da398, max_idle_ns: 440795268375 ns
> [ 0.000080] Calibrating delay loop (skipped), value calculated using timer frequency.. 6387.24 BogoMIPS (lpj=3193623)
> [ 0.000496] pid_max: default: 32768 minimum: 301
> [ 0.000576] LSM: Security Framework initializing
> [ 0.000661] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
> [ 0.000747] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
> [ 0.001232] LVT offset 1 assigned for vector 0xf9
> [ 0.001350] LVT offset 2 assigned for vector 0xf4
> [ 0.001423] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
> [ 0.001484] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
> [ 0.001549] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [ 0.001620] Spectre V2 : Mitigation: Retpolines
> [ 0.001678] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [ 0.001748] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
> [ 0.001818] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
> [ 0.003640] Freeing SMP alternatives memory: 52K
> [ 0.106859] smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
> [ 0.107026] cblist_init_generic: Setting adjustable number of callback queues.
> [ 0.107079] cblist_init_generic: Setting shift to 4 and lim to 1.
> [ 0.107079] cblist_init_generic: Setting shift to 4 and lim to 1.
> [ 0.107079] cblist_init_generic: Setting shift to 4 and lim to 1.
> [ 0.107079] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
> [ 0.107079] ... version: 0
> [ 0.107079] ... bit width: 48
> [ 0.107079] ... generic registers: 6
> [ 0.107079] ... value mask: 0000ffffffffffff
> [ 0.107079] ... max period: 00007fffffffffff
> [ 0.107079] ... fixed-purpose events: 0
> [ 0.107079] ... event mask: 000000000000003f
> [ 0.107079] rcu: Hierarchical SRCU implementation.
> [ 0.107204] MCE: In-kernel MCE decoding enabled.
> [ 0.107356] smp: Bringing up secondary CPUs ...
> [ 0.107478] x86: Booting SMP configuration:
> [ 0.107535] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
> [ 0.121101] smp: Brought up 1 node, 12 CPUs
> [ 0.121227] smpboot: Max logical packages: 2
> [ 0.121285] smpboot: Total of 12 processors activated (76646.95 BogoMIPS)
> [ 0.122529] devtmpfs: initialized
> [ 0.122529] x86/mm: Memory block size: 128MB
> [ 0.123727] ACPI: PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
> [ 0.123727] ACPI: PM: Registering ACPI NVS region [mem 0xdaa83000-0xdae3efff] (3915776 bytes)
> [ 0.123727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 0.124086] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
> [ 0.124197] pinctrl core: initialized pinctrl subsystem
> [ 0.124444] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [ 0.124586] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
> [ 0.124653] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
> [ 0.124723] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
> [ 0.124801] audit: initializing netlink subsys (disabled)
> [ 0.124867] audit: type=2000 audit(1649868999.131:1): state=initialized audit_enabled=0 res=1
> [ 0.124867] thermal_sys: Registered thermal governor 'fair_share'
> [ 0.124867] thermal_sys: Registered thermal governor 'bang_bang'
> [ 0.124867] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.125081] thermal_sys: Registered thermal governor 'user_space'
> [ 0.125152] cpuidle: using governor ladder
> [ 0.126140] cpuidle: using governor menu
> [ 0.127114] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.127212] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.127287] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> [ 0.127359] PCI: Using configuration type 1 for base access
> [ 0.130847] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
> [ 0.130847] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
> [ 0.131100] cryptd: max_cpu_qlen set to 1000
> [ 0.131180] raid6: skipped pq benchmark and selected avx2x4
> [ 0.131180] raid6: using avx2x2 recovery algorithm
> [ 0.131251] ACPI: Added _OSI(Module Device)
> [ 0.131309] ACPI: Added _OSI(Processor Device)
> [ 0.131367] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.131425] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.131486] ACPI: Added _OSI(Linux-Dell-Video)
> [ 0.131544] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
> [ 0.131605] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
> [ 0.140402] ACPI: 7 ACPI AML tables successfully acquired and loaded
> [ 0.141614] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
> [ 0.144030] ACPI: Interpreter enabled
> [ 0.144097] ACPI: PM: (supports S0 S3 S4 S5)
> [ 0.144155] ACPI: Using IOAPIC for interrupt routing
> [ 0.144494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.144811] ACPI: Enabled 4 GPEs in block 00 to 1F
> [ 0.160676] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.160743] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
> [ 0.160892] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME LTR DPC]
> [ 0.161099] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
> [ 0.161170] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
> [ 0.161507] PCI host bridge to bus 0000:00
> [ 0.161566] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
> [ 0.161630] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
> [ 0.161694] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
> [ 0.161758] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.161822] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
> [ 0.161891] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
> [ 0.161959] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
> [ 0.162027] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.162091] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
> [ 0.162227] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
> [ 0.162369] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
> [ 0.162480] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
> [ 0.162638] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
> [ 0.163146] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
> [ 0.163263] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
> [ 0.163365] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
> [ 0.163518] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
> [ 0.163678] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
> [ 0.163799] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
> [ 0.163901] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
> [ 0.164082] pci 0000:00:07.1: enabling Extended Tags
> [ 0.164205] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
> [ 0.164361] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
> [ 0.164463] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
> [ 0.164552] pci 0000:00:08.1: enabling Extended Tags
> [ 0.164675] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
> [ 0.165208] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
> [ 0.165472] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
> [ 0.165738] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
> [ 0.165828] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
> [ 0.165918] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
> [ 0.166007] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
> [ 0.166114] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
> [ 0.166205] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
> [ 0.166294] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
> [ 0.166383] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
> [ 0.166560] pci 0000:01:00.0: [1022:43bb] type 00 class 0x0c0330
> [ 0.166636] pci 0000:01:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
> [ 0.166779] pci 0000:01:00.0: PME# supported from D3hot D3cold
> [ 0.166934] pci 0000:01:00.1: [1022:43b7] type 00 class 0x010601
> [ 0.167035] pci 0000:01:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
> [ 0.167086] pci 0000:01:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
> [ 0.167188] pci 0000:01:00.1: PME# supported from D3hot D3cold
> [ 0.167314] pci 0000:01:00.2: [1022:43b2] type 01 class 0x060400
> [ 0.167450] pci 0000:01:00.2: PME# supported from D3hot D3cold
> [ 0.167593] pci 0000:00:01.3: PCI bridge to [bus 01-06]
> [ 0.167655] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
> [ 0.167718] pci 0000:00:01.3: bridge window [mem 0xfe600000-0xfe7fffff]
> [ 0.167859] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
> [ 0.168010] pci 0000:02:00.0: PME# supported from D3hot D3cold
> [ 0.168163] pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
> [ 0.168313] pci 0000:02:01.0: PME# supported from D3hot D3cold
> [ 0.168459] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
> [ 0.168609] pci 0000:02:04.0: PME# supported from D3hot D3cold
> [ 0.168760] pci 0000:01:00.2: PCI bridge to [bus 02-06]
> [ 0.168823] pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
> [ 0.168887] pci 0000:01:00.2: bridge window [mem 0xfe600000-0xfe6fffff]
> [ 0.169015] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
> [ 0.169106] pci 0000:03:00.0: reg 0x10: [io 0xf000-0xf0ff]
> [ 0.169201] pci 0000:03:00.0: reg 0x18: [mem 0xfe604000-0xfe604fff 64bit]
> [ 0.169286] pci 0000:03:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit]
> [ 0.169490] pci 0000:03:00.0: supports D1 D2
> [ 0.169548] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.169794] pci 0000:02:00.0: PCI bridge to [bus 03]
> [ 0.169857] pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
> [ 0.169921] pci 0000:02:00.0: bridge window [mem 0xfe600000-0xfe6fffff]
> [ 0.170080] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400
> [ 0.170328] pci 0000:04:00.0: supports D1 D2
> [ 0.170386] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.173103] pci 0000:02:01.0: PCI bridge to [bus 04-05]
> [ 0.173239] pci_bus 0000:05: extended config space not accessible
> [ 0.173402] pci 0000:04:00.0: PCI bridge to [bus 05]
> [ 0.173529] pci 0000:02:04.0: PCI bridge to [bus 06]
> [ 0.173677] pci 0000:07:00.0: [1002:67ff] type 00 class 0x030000
> [ 0.173753] pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
> [ 0.173831] pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
> [ 0.173905] pci 0000:07:00.0: reg 0x20: [io 0xe000-0xe0ff]
> [ 0.173972] pci 0000:07:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
> [ 0.174040] pci 0000:07:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
> [ 0.174101] pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [ 0.174225] pci 0000:07:00.0: supports D1 D2
> [ 0.174283] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.174468] pci 0000:07:00.1: [1002:aae0] type 00 class 0x040300
> [ 0.174545] pci 0000:07:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
> [ 0.174683] pci 0000:07:00.1: supports D1 D2
> [ 0.174809] pci 0000:00:03.1: PCI bridge to [bus 07]
> [ 0.174871] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
> [ 0.174934] pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
> [ 0.174999] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
> [ 0.175146] pci 0000:08:00.0: [1022:145a] type 00 class 0x130000
> [ 0.175235] pci 0000:08:00.0: enabling Extended Tags
> [ 0.175365] pci 0000:08:00.2: [1022:1456] type 00 class 0x108000
> [ 0.175439] pci 0000:08:00.2: reg 0x18: [mem 0xfe400000-0xfe4fffff]
> [ 0.175511] pci 0000:08:00.2: reg 0x24: [mem 0xfe500000-0xfe501fff]
> [ 0.175580] pci 0000:08:00.2: enabling Extended Tags
> [ 0.175722] pci 0000:08:00.3: [1022:145c] type 00 class 0x0c0330
> [ 0.175793] pci 0000:08:00.3: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
> [ 0.175875] pci 0000:08:00.3: enabling Extended Tags
> [ 0.175960] pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
> [ 0.176105] pci 0000:00:07.1: PCI bridge to [bus 08]
> [ 0.176168] pci 0000:00:07.1: bridge window [mem 0xfe300000-0xfe5fffff]
> [ 0.176299] pci 0000:09:00.0: [1022:1455] type 00 class 0x130000
> [ 0.176390] pci 0000:09:00.0: enabling Extended Tags
> [ 0.176523] pci 0000:09:00.2: [1022:7901] type 00 class 0x010601
> [ 0.176608] pci 0000:09:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
> [ 0.176677] pci 0000:09:00.2: enabling Extended Tags
> [ 0.176765] pci 0000:09:00.2: PME# supported from D3hot D3cold
> [ 0.176885] pci 0000:09:00.3: [1022:1457] type 00 class 0x040300
> [ 0.176954] pci 0000:09:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
> [ 0.177040] pci 0000:09:00.3: enabling Extended Tags
> [ 0.177108] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
> [ 0.177233] pci 0000:00:08.1: PCI bridge to [bus 09]
> [ 0.177296] pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
> [ 0.177667] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
> [ 0.177774] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
> [ 0.177874] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
> [ 0.177982] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
> [ 0.178109] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
> [ 0.178205] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
> [ 0.178300] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
> [ 0.178395] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
> [ 0.178895] iommu: Default domain type: Translated
> [ 0.178895] iommu: DMA domain TLB invalidation policy: lazy mode
> [ 0.179083] pci 0000:07:00.0: vgaarb: setting as boot VGA device
> [ 0.179145] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [ 0.179217] pci 0000:07:00.0: vgaarb: bridge control possible
> [ 0.179278] vgaarb: loaded
> [ 0.179405] SCSI subsystem initialized
> [ 0.179468] libata version 3.00 loaded.
> [ 0.179468] ACPI: bus type USB registered
> [ 0.179468] usbcore: registered new interface driver usbfs
> [ 0.179468] usbcore: registered new interface driver hub
> [ 0.179468] usbcore: registered new device driver usb
> [ 0.179468] pps_core: LinuxPPS API ver. 1 registered
> [ 0.179480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
> [ 0.180082] PTP clock support registered
> [ 0.180149] EDAC MC: Ver: 3.0.0
> [ 0.180219] Advanced Linux Sound Architecture Driver Initialized.
> [ 0.180246] PCI: Using ACPI for IRQ routing
> [ 0.185340] PCI: pci_cache_line_size set to 64 bytes
> [ 0.185454] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
> [ 0.185516] e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff]
> [ 0.185577] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
> [ 0.185639] e820: reserve RAM buffer [mem 0xd4435000-0xd7ffffff]
> [ 0.185700] e820: reserve RAM buffer [mem 0xda831000-0xdbffffff]
> [ 0.185762] e820: reserve RAM buffer [mem 0xdaa83000-0xdbffffff]
> [ 0.185824] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
> [ 0.185885] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
> [ 0.186117] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
> [ 0.186232] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 0.186295] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
> [ 0.188128] clocksource: Switched to clocksource tsc-early
> [ 0.194886] VFS: Disk quotas dquot_6.6.0
> [ 0.194957] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.195090] pnp: PnP ACPI init
> [ 0.195257] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
> [ 0.195377] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
> [ 0.195637] system 00:03: [io 0x0300-0x030f] has been reserved
> [ 0.195700] system 00:03: [io 0x0230-0x023f] has been reserved
> [ 0.195767] system 00:03: [io 0x0290-0x029f] has been reserved
> [ 0.196043] pnp 00:04: [dma 0 disabled]
> [ 0.196289] system 00:05: [io 0x04d0-0x04d1] has been reserved
> [ 0.196352] system 00:05: [io 0x040b] has been reserved
> [ 0.196412] system 00:05: [io 0x04d6] has been reserved
> [ 0.196473] system 00:05: [io 0x0c00-0x0c01] has been reserved
> [ 0.196534] system 00:05: [io 0x0c14] has been reserved
> [ 0.196595] system 00:05: [io 0x0c50-0x0c51] has been reserved
> [ 0.196658] system 00:05: [io 0x0c52] has been reserved
> [ 0.196718] system 00:05: [io 0x0c6c] has been reserved
> [ 0.196780] system 00:05: [io 0x0c6f] has been reserved
> [ 0.196840] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
> [ 0.196901] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
> [ 0.196963] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
> [ 0.197024] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
> [ 0.197085] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
> [ 0.197146] system 00:05: [io 0x0800-0x089f] has been reserved
> [ 0.197208] system 00:05: [io 0x0b00-0x0b0f] has been reserved
> [ 0.197269] system 00:05: [io 0x0b20-0x0b3f] has been reserved
> [ 0.197330] system 00:05: [io 0x0900-0x090f] has been reserved
> [ 0.197391] system 00:05: [io 0x0910-0x091f] has been reserved
> [ 0.197453] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.197517] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
> [ 0.197581] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
> [ 0.197644] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.197708] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
> [ 0.197773] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
> [ 0.197836] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
> [ 0.198257] pnp: PnP ACPI: found 6 devices
> [ 0.203984] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 0.204111] NET: Registered PF_INET protocol family
> [ 0.204379] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [ 0.206105] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
> [ 0.206193] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
> [ 0.206397] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
> [ 0.206581] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.206734] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
> [ 0.206856] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
> [ 0.206945] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
> [ 0.207077] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [ 0.207217] RPC: Registered named UNIX socket transport module.
> [ 0.207279] RPC: Registered udp transport module.
> [ 0.207338] RPC: Registered tcp transport module.
> [ 0.207397] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 0.207572] NET: Registered PF_XDP protocol family
> [ 0.207643] pci 0000:02:00.0: PCI bridge to [bus 03]
> [ 0.207704] pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
> [ 0.207773] pci 0000:02:00.0: bridge window [mem 0xfe600000-0xfe6fffff]
> [ 0.207843] pci 0000:04:00.0: PCI bridge to [bus 05]
> [ 0.207921] pci 0000:02:01.0: PCI bridge to [bus 04-05]
> [ 0.207990] pci 0000:02:04.0: PCI bridge to [bus 06]
> [ 0.208057] pci 0000:01:00.2: PCI bridge to [bus 02-06]
> [ 0.208118] pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
> [ 0.208182] pci 0000:01:00.2: bridge window [mem 0xfe600000-0xfe6fffff]
> [ 0.208251] pci 0000:00:01.3: PCI bridge to [bus 01-06]
> [ 0.208312] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
> [ 0.208375] pci 0000:00:01.3: bridge window [mem 0xfe600000-0xfe7fffff]
> [ 0.208442] pci 0000:00:03.1: PCI bridge to [bus 07]
> [ 0.208502] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
> [ 0.208566] pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
> [ 0.208630] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
> [ 0.208701] pci 0000:00:07.1: PCI bridge to [bus 08]
> [ 0.208763] pci 0000:00:07.1: bridge window [mem 0xfe300000-0xfe5fffff]
> [ 0.208830] pci 0000:00:08.1: PCI bridge to [bus 09]
> [ 0.208891] pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
> [ 0.208957] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
> [ 0.209020] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
> [ 0.209083] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
> [ 0.209145] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
> [ 0.209207] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
> [ 0.209271] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window]
> [ 0.209335] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
> [ 0.209399] pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
> [ 0.209460] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
> [ 0.209522] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
> [ 0.209583] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
> [ 0.209645] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
> [ 0.209706] pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff]
> [ 0.209770] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
> [ 0.209831] pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
> [ 0.209893] pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
> [ 0.209961] pci_bus 0000:08: resource 1 [mem 0xfe300000-0xfe5fffff]
> [ 0.210024] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff]
> [ 0.210252] pci 0000:04:00.0: Disabling ASPM L0s/L1
> [ 0.210332] pci 0000:07:00.1: D0 power state depends on 0000:07:00.0
> [ 0.210539] PCI: CLS 64 bytes, default 64
> [ 0.210604] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
> [ 0.210697] pci 0000:00:01.0: Adding to iommu group 0
> [ 0.210769] pci 0000:00:01.3: Adding to iommu group 1
> [ 0.210839] pci 0000:00:02.0: Adding to iommu group 2
> [ 0.210908] pci 0000:00:03.0: Adding to iommu group 3
> [ 0.210974] pci 0000:00:03.1: Adding to iommu group 4
> [ 0.211043] pci 0000:00:04.0: Adding to iommu group 5
> [ 0.211112] pci 0000:00:07.0: Adding to iommu group 6
> [ 0.211179] pci 0000:00:07.1: Adding to iommu group 7
> [ 0.211248] pci 0000:00:08.0: Adding to iommu group 8
> [ 0.211314] pci 0000:00:08.1: Adding to iommu group 9
> [ 0.211386] pci 0000:00:14.0: Adding to iommu group 10
> [ 0.211454] pci 0000:00:14.3: Adding to iommu group 10
> [ 0.211541] pci 0000:00:18.0: Adding to iommu group 11
> [ 0.211606] pci 0000:00:18.1: Adding to iommu group 11
> [ 0.211672] pci 0000:00:18.2: Adding to iommu group 11
> [ 0.211740] pci 0000:00:18.3: Adding to iommu group 11
> [ 0.211806] pci 0000:00:18.4: Adding to iommu group 11
> [ 0.211871] pci 0000:00:18.5: Adding to iommu group 11
> [ 0.211937] pci 0000:00:18.6: Adding to iommu group 11
> [ 0.212002] pci 0000:00:18.7: Adding to iommu group 11
> [ 0.212076] pci 0000:01:00.0: Adding to iommu group 12
> [ 0.212143] pci 0000:01:00.1: Adding to iommu group 12
> [ 0.212210] pci 0000:01:00.2: Adding to iommu group 12
> [ 0.212272] pci 0000:02:00.0: Adding to iommu group 12
> [ 0.212335] pci 0000:02:01.0: Adding to iommu group 12
> [ 0.212397] pci 0000:02:04.0: Adding to iommu group 12
> [ 0.212459] pci 0000:03:00.0: Adding to iommu group 12
> [ 0.212520] pci 0000:04:00.0: Adding to iommu group 12
> [ 0.212601] pci 0000:07:00.0: Adding to iommu group 13
> [ 0.212667] pci 0000:07:00.1: Adding to iommu group 13
> [ 0.212735] pci 0000:08:00.0: Adding to iommu group 14
> [ 0.212809] pci 0000:08:00.2: Adding to iommu group 15
> [ 0.212876] pci 0000:08:00.3: Adding to iommu group 16
> [ 0.212943] pci 0000:09:00.0: Adding to iommu group 17
> [ 0.213010] pci 0000:09:00.2: Adding to iommu group 18
> [ 0.213077] pci 0000:09:00.3: Adding to iommu group 19
> [ 0.215179] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
> [ 0.215245] AMD-Vi: Extended features (0xf77ef22294ada): PPR NX GT IA GA PC GA_vAPIC
> [ 0.215317] AMD-Vi: Interrupt remapping enabled
> [ 0.215374] AMD-Vi: Virtual APIC enabled
> [ 0.215542] software IO TLB: tearing down default memory pool
> [ 0.216734] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
> [ 0.216805] RAPL PMU: hw unit of domain package 2^-16 Joules
> [ 0.216869] amd_uncore: 4 amd_df counters detected
> [ 0.216930] amd_uncore: 6 amd_l3 counters detected
> [ 0.217132] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
> [ 0.217293] SVM: TSC scaling supported
> [ 0.217350] kvm: Nested Virtualization enabled
> [ 0.217407] SVM: kvm: Nested Paging enabled
> [ 0.217466] SEV supported: 16 ASIDs
> [ 0.217533] SVM: Virtual VMLOAD VMSAVE supported
> [ 0.217591] SVM: Virtual GIF supported
> [ 0.217647] SVM: LBR virtualization supported
> [ 0.223424] Initialise system trusted keyrings
> [ 0.223490] Key type blacklist registered
> [ 0.223579] workingset: timestamp_bits=40 max_order=22 bucket_order=0
> [ 0.224570] zbud: loaded
> [ 0.226585] NFS: Registering the id_resolver key type
> [ 0.226648] Key type id_resolver registered
> [ 0.226706] Key type id_legacy registered
> [ 0.226777] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
> [ 0.226842] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
> [ 0.226913] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
> [ 0.226980] fuse: init (API version 7.36)
> [ 0.236082] xor: automatically using best checksumming function avx
> [ 0.236147] async_tx: api initialized (async)
> [ 0.236205] Key type asymmetric registered
> [ 0.236263] Asymmetric key parser 'x509' registered
> [ 0.236562] alg: self-tests for CTR-KDF (hmac(sha256)) passed
> [ 0.236631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
> [ 0.236727] io scheduler mq-deadline registered
> [ 0.236975] atomic64_test: passed for x86-64 platform with CX8 and with SSE
> [ 0.238998] pcieport 0000:00:01.3: AER: enabled with IRQ 26
> [ 0.239268] pcieport 0000:00:03.1: AER: enabled with IRQ 27
> [ 0.239533] pcieport 0000:00:07.1: AER: enabled with IRQ 28
> [ 0.240142] pcieport 0000:00:08.1: AER: enabled with IRQ 30
> [ 0.240848] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [ 0.240933] ACPI: button: Power Button [PWRB]
> [ 0.241022] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.241118] ACPI: button: Power Button [PWRF]
> [ 0.241227] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.241299] ACPI: \_PR_.P000: Found 2 idle states
> [ 0.241455] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.241525] ACPI: \_PR_.P001: Found 2 idle states
> [ 0.241663] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.241735] ACPI: \_PR_.P002: Found 2 idle states
> [ 0.241875] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.241947] ACPI: \_PR_.P003: Found 2 idle states
> [ 0.242103] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.242175] ACPI: \_PR_.P004: Found 2 idle states
> [ 0.242319] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.242393] ACPI: \_PR_.P005: Found 2 idle states
> [ 0.242525] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.242597] ACPI: \_PR_.P006: Found 2 idle states
> [ 0.242736] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.242806] ACPI: \_PR_.P007: Found 2 idle states
> [ 0.242916] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.242983] ACPI: \_PR_.P008: Found 2 idle states
> [ 0.243092] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.243160] ACPI: \_PR_.P009: Found 2 idle states
> [ 0.243302] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.243371] ACPI: \_PR_.P00A: Found 2 idle states
> [ 0.243514] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> [ 0.243583] ACPI: \_PR_.P00B: Found 2 idle states
> [ 0.244514] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.244648] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [ 0.245290] Linux agpgart interface v0.103
> [ 0.245390] AMD-Vi: AMD IOMMUv2 loaded and initialized
> [ 0.245527] ACPI: bus type drm_connector registered
> [ 0.245593] [drm] amdgpu kernel modesetting enabled.
> [ 0.245685] amdgpu: Ignoring ACPI CRAT on non-APU system
> [ 0.245749] amdgpu: Virtual CRAT table created for CPU
> [ 0.245814] amdgpu: Topology: Add CPU node
> [ 0.245917] amdgpu 0000:07:00.0: vgaarb: deactivate vga console
> [ 0.247086] Console: switching to colour dummy device 80x25
> [ 0.247155] [drm] initializing kernel modesetting (POLARIS11 0x1002:0x67FF 0x1DA2:0xE348 0xCF).
> [ 0.247161] amdgpu 0000:07:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
> [ 0.247168] [drm] register mmio base: 0xFE900000
> [ 0.247170] [drm] register mmio size: 262144
> [ 0.247175] [drm] add ip block number 0 <vi_common>
> [ 0.247177] [drm] add ip block number 1 <gmc_v8_0>
> [ 0.247179] [drm] add ip block number 2 <tonga_ih>
> [ 0.247181] [drm] add ip block number 3 <gfx_v8_0>
> [ 0.247183] [drm] add ip block number 4 <sdma_v3_0>
> [ 0.247185] [drm] add ip block number 5 <powerplay>
> [ 0.247187] [drm] add ip block number 6 <dm>
> [ 0.247189] [drm] add ip block number 7 <uvd_v6_0>
> [ 0.247190] [drm] add ip block number 8 <vce_v3_0>
> [ 0.247433] amdgpu 0000:07:00.0: No more image in the PCI ROM
> [ 0.247451] amdgpu 0000:07:00.0: amdgpu: Fetched VBIOS from ROM BAR
> [ 0.247453] amdgpu: ATOM BIOS: 113-34830H2-U02
> [ 0.247466] [drm] UVD is enabled in VM mode
> [ 0.247468] [drm] UVD ENC is enabled in VM mode
> [ 0.247471] [drm] VCE enabled in VM mode
> [ 0.247493] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
> [ 0.247503] amdgpu 0000:07:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
> [ 0.247507] amdgpu 0000:07:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
> [ 0.247512] [drm] Detected VRAM RAM=2048M, BAR=256M
> [ 0.247514] [drm] RAM width 128bits GDDR5
> [ 0.247540] [drm] amdgpu: 2048M of VRAM memory ready
> [ 0.247542] [drm] amdgpu: 3072M of GTT memory ready.
> [ 0.247545] [drm] GART: num cpu pages 65536, num gpu pages 65536
> [ 0.249118] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
> [ 0.249170] [drm] Chained IB support enabled!
> [ 0.249842] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
> [ 0.249853] [drm] Found UVD firmware Version: 1.130 Family ID: 16
> [ 0.250560] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
> [ 0.584088] [drm] Display Core initialized with v3.2.167!
> [ 0.625566] [drm] UVD and UVD ENC initialized successfully.
> [ 0.726479] [drm] VCE initialized successfully.
> [ 0.727221] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
> [ 0.727284] amdgpu: SRAT table not found
> [ 0.727286] amdgpu: Virtual CRAT table created for GPU
> [ 0.727319] amdgpu: Topology: Add dGPU node [0x67ff:0x1002]
> [ 0.727323] kfd kfd: amdgpu: added device 1002:67ff
> [ 0.727334] amdgpu 0000:07:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 8, active_cu_number 16
> [ 0.731402] amdgpu 0000:07:00.0: amdgpu: Using BACO for runtime pm
> [ 0.731589] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:07:00.0 on minor 0
> [ 0.738000] fbcon: amdgpudrmfb (fb0) is primary device
> [ 0.801234] Console: switching to colour frame buffer device 240x67
> [ 0.818522] amdgpu 0000:07:00.0: [drm] fb0: amdgpudrmfb frame buffer device
> [ 0.820399] brd: module loaded
> [ 0.821540] loop: module loaded
> [ 0.821821] ahci 0000:01:00.1: version 3.0
> [ 0.821981] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
> [ 0.822049] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
> [ 0.822090] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
> [ 0.822544] scsi host0: ahci
> [ 0.822656] scsi host1: ahci
> [ 0.822752] scsi host2: ahci
> [ 0.822846] scsi host3: ahci
> [ 0.822953] scsi host4: ahci
> [ 0.823040] scsi host5: ahci
> [ 0.823130] scsi host6: ahci
> [ 0.823211] scsi host7: ahci
> [ 0.823257] ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 39
> [ 0.823296] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 39
> [ 0.823335] ata3: DUMMY
> [ 0.823353] ata4: DUMMY
> [ 0.823371] ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 39
> [ 0.823409] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 39
> [ 0.823446] ata7: DUMMY
> [ 0.823464] ata8: DUMMY
> [ 0.823741] ahci 0000:09:00.2: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
> [ 0.823792] ahci 0000:09:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
> [ 0.824063] scsi host8: ahci
> [ 0.824156] scsi host9: ahci
> [ 0.824250] scsi host10: ahci
> [ 0.824342] scsi host11: ahci
> [ 0.824390] ata9: DUMMY
> [ 0.824408] ata10: DUMMY
> [ 0.824427] ata11: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808200 irq 43
> [ 0.824465] ata12: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808280 irq 44
> [ 0.825089] scsi host12: pata_legacy
> [ 0.825136] ata13: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
> [ 1.240093] tsc: Refined TSC clocksource calibration: 3193.999 MHz
> [ 1.240762] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a24cf65f, max_idle_ns: 440795271781 ns
> [ 1.241397] clocksource: Switched to clocksource tsc
> [ 1.288105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.288107] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.289466] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.290548] ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
> [ 1.290575] ata11.00: ATA-8: ST31000528AS, CC49, max UDMA/133
> [ 1.291243] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
> [ 1.291880] ata11.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32)
> [ 1.293188] ata12.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133
> [ 1.294515] ata1.00: configured for UDMA/133
> [ 1.295146] ata12.00: configured for UDMA/133
> [ 1.303017] ata11.00: configured for UDMA/133
> [ 3.864112] floppy0: no floppy controllers found
> [ 3.865013] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
> [ 3.865983] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
> [ 3.866790] sd 0:0:0:0: [sda] Write Protect is off
> [ 3.867528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.868476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.921071] sda: sda1 sda2 < sda5 sda6 >
> [ 3.931203] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 4.328095] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 4.332558] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
> [ 4.333569] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 32), AA
> [ 4.338662] ata2.00: configured for UDMA/133
> [ 4.339551] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
> [ 4.340516] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 4.341233] sd 1:0:0:0: [sdb] Write Protect is off
> [ 4.341918] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 4.342592] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 4.373244] sdb: sdb1
> [ 4.380207] sd 1:0:0:0: [sdb] Attached SCSI disk
> [ 4.800095] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 4.802255] ata5.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
> [ 4.802874] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
> [ 4.805347] ata5.00: configured for UDMA/133
> [ 4.806061] scsi 4:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
> [ 4.807119] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
> [ 4.807940] sd 4:0:0:0: [sdc] Write Protect is off
> [ 4.808828] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 4.809551] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 4.855096] sdc: sdc1 sdc2 < sdc5 >
> [ 4.861151] sd 4:0:0:0: [sdc] Attached SCSI disk
> [ 5.272095] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 5.273632] ata6.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
> [ 5.274448] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32)
> [ 5.275990] ata6.00: configured for UDMA/133
> [ 5.276938] scsi 5:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
> [ 5.277900] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
> [ 5.278020] scsi 10:0:0:0: Direct-Access ATA ST31000528AS CC49 PQ: 0 ANSI: 5
> [ 5.278815] sd 5:0:0:0: [sdd] Write Protect is off
> [ 5.279766] sd 10:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
> [ 5.280440] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 5.281287] sd 10:0:0:0: [sde] Write Protect is off
> [ 5.282137] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.282143] scsi 11:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5
> [ 5.282944] sd 10:0:0:0: [sde] Mode Sense: 00 3a 00 00
> [ 5.285477] sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.319446] sde: sde1
> [ 5.321274] sr 11:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 5.322253] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 5.327151] sd 10:0:0:0: [sde] Attached SCSI disk
> [ 5.339732] sdd: sdd1
> [ 5.340795] sr 11:0:0:0: Attached scsi CD-ROM sr0
> [ 5.346152] sd 5:0:0:0: [sdd] Attached SCSI disk
> [ 5.347660] scsi host12: pata_legacy
> [ 5.348572] ata14: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
> [ 5.517647] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 10:7b:44:50:35:01, XID 541, IRQ 57
> [ 5.518509] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
> [ 5.519356] usbcore: registered new interface driver rt73usb
> [ 5.520303] xhci_hcd 0000:01:00.0: xHCI Host Controller
> [ 5.521733] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
> [ 5.578449] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010048000410
> [ 5.579434] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
> [ 5.580774] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.582091] usb usb1: Product: xHCI Host Controller
> [ 5.583379] usb usb1: Manufacturer: Linux 5.17.1+ xhci-hcd
> [ 5.584642] usb usb1: SerialNumber: 0000:01:00.0
> [ 5.586025] hub 1-0:1.0: USB hub found
> [ 5.587404] hub 1-0:1.0: 10 ports detected
> [ 5.593440] xhci_hcd 0000:01:00.0: xHCI Host Controller
> [ 5.594386] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
> [ 5.595796] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
> [ 5.597566] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
> [ 5.598533] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
> [ 5.599422] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.600276] usb usb2: Product: xHCI Host Controller
> [ 5.601064] usb usb2: Manufacturer: Linux 5.17.1+ xhci-hcd
> [ 5.601865] usb usb2: SerialNumber: 0000:01:00.0
> [ 5.602725] hub 2-0:1.0: USB hub found
> [ 5.603578] hub 2-0:1.0: 4 ports detected
> [ 5.606340] xhci_hcd 0000:08:00.3: xHCI Host Controller
> [ 5.607395] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3
> [ 5.608881] xhci_hcd 0000:08:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410
> [ 5.610225] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
> [ 5.611456] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.612679] usb usb3: Product: xHCI Host Controller
> [ 5.614045] usb usb3: Manufacturer: Linux 5.17.1+ xhci-hcd
> [ 5.615261] usb usb3: SerialNumber: 0000:08:00.3
> [ 5.616688] hub 3-0:1.0: USB hub found
> [ 5.617971] hub 3-0:1.0: 4 ports detected
> [ 5.619434] xhci_hcd 0000:08:00.3: xHCI Host Controller
> [ 5.620742] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4
> [ 5.621911] xhci_hcd 0000:08:00.3: Host supports USB 3.0 SuperSpeed
> [ 5.623198] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
> [ 5.624521] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
> [ 5.625740] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.626930] usb usb4: Product: xHCI Host Controller
> [ 5.628118] usb usb4: Manufacturer: Linux 5.17.1+ xhci-hcd
> [ 5.629308] usb usb4: SerialNumber: 0000:08:00.3
> [ 5.630574] hub 4-0:1.0: USB hub found
> [ 5.631791] hub 4-0:1.0: 4 ports detected
> [ 5.633247] i8042: PNP: No PS/2 controller found.
> [ 5.634529] mousedev: PS/2 mouse device common for all mice
> [ 5.635790] rtc_cmos 00:02: RTC can wake from S4
> [ 5.637424] rtc_cmos 00:02: registered as rtc0
> [ 5.638586] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 5.639795] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
> [ 5.641050] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
> [ 5.642281] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
> [ 5.648376] device-mapper: uevent: version 1.0.3
> [ 5.649445] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@xxxxxxxxxx
> [ 5.650726] ccp 0000:08:00.2: ccp enabled
> [ 5.651476] hid: raw HID events driver (C) Jiri Kosina
> [ 5.652226] usbcore: registered new interface driver usbhid
> [ 5.652984] usbhid: USB HID core driver
> [ 5.653704] asus_wmi: ASUS WMI generic driver loaded
> [ 5.654615] asus_wmi: Initialization: 0x0
> [ 5.655296] asus_wmi: BIOS WMI version: 0.9
> [ 5.656083] asus_wmi: SFUN value: 0x0
> [ 5.656822] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
> [ 5.657930] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input2
> [ 5.659946] intel_rapl_common: Found RAPL domain package
> [ 5.660778] intel_rapl_common: Found RAPL domain core
> [ 5.662128] snd_hda_intel 0000:07:00.1: Force to non-snoop mode
> [ 5.663631] Initializing XFRM netlink socket
> [ 5.664431] NET: Registered PF_INET6 protocol family
> [ 5.666018] Segment Routing with IPv6
> [ 5.666776] RPL Segment Routing with IPv6
> [ 5.667562] In-situ OAM (IOAM) with IPv6
> [ 5.668413] NET: Registered PF_PACKET protocol family
> [ 5.669313] snd_hda_intel 0000:07:00.1: bound 0000:07:00.0 (ops amdgpu_dm_audio_component_bind_ops)
> [ 5.670195] 8021q: 802.1Q VLAN Support v1.8
> [ 5.671035] Key type dns_resolver registered
> [ 5.671306] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input3
> [ 5.672820] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input4
> [ 5.672975] microcode: CPU0: patch_level=0x08001137
> [ 5.673715] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input5
> [ 5.674409] microcode: CPU1: patch_level=0x08001137
> [ 5.675430] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input6
> [ 5.676258] microcode: CPU2: patch_level=0x08001137
> [ 5.677313] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input7
> [ 5.678042] microcode: CPU3: patch_level=0x08001137
> [ 5.679969] microcode: CPU4: patch_level=0x08001137
> [ 5.680851] microcode: CPU5: patch_level=0x08001137
> [ 5.681773] microcode: CPU6: patch_level=0x08001137
> [ 5.682979] microcode: CPU7: patch_level=0x08001137
> [ 5.683159] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
> [ 5.683709] microcode: CPU8: patch_level=0x08001137
> [ 5.684500] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 5.685298] microcode: CPU9: patch_level=0x08001137
> [ 5.686180] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [ 5.687178] microcode: CPU10: patch_level=0x08001137
> [ 5.687878] microcode: CPU11: patch_level=0x08001137
> [ 5.688803] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
> [ 5.689663] microcode: Microcode Update Driver: v2.2.
> [ 5.690566] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
> [ 5.690567] snd_hda_codec_realtek hdaudioC1D0: inputs:
> [ 5.690569] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
> [ 5.691500] IPI shorthand broadcast: enabled
> [ 5.692303] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
> [ 5.693215] AVX2 version of gcm_enc/dec engaged.
> [ 5.694117] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
> [ 5.697749] AES CTR mode by8 optimization enabled
> [ 5.698892] sched_clock: Marking stable (5705804000, -6920351)->(5737799777, -38916128)
> [ 5.700185] registered taskstats version 1
> [ 5.700999] Loading compiled-in X.509 certificates
> [ 5.701955] zswap: loaded using pool lzo/zbud
> [ 5.704552] Key type ._fscrypt registered
> [ 5.705325] Key type .fscrypt registered
> [ 5.706424] Key type fscrypt-provisioning registered
> [ 5.708605] Key type encrypted registered
> [ 5.711238] netpoll: netconsole: local port 6666
> [ 5.712117] netpoll: netconsole: local IPv4 address 192.168.1.99
> [ 5.712898] netpoll: netconsole: interface 'wlan0'
> [ 5.713641] netpoll: netconsole: remote port 6666
> [ 5.714406] netpoll: netconsole: remote IPv4 address 192.168.1.98
> [ 5.715906] netpoll: netconsole: wlan0 doesn't exist, aborting
> [ 5.716626] netconsole: cleaning up
> [ 5.716830] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input8
> [ 5.718705] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input9
> [ 5.719952] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input10
> [ 5.719956] acpi_cpufreq: overriding BIOS provided _PSD data
> [ 5.721231] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input11
> [ 5.723354] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input12
> [ 5.723365] RAS: Correctable Errors collector initialized.
> [ 5.725472] cfg80211: Loading compiled-in X.509 certificates for regulatory database
> [ 5.726744] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [ 5.727680] ALSA device list:
> [ 5.728490] #0: HDA ATI HDMI at 0xfe960000 irq 65
> [ 5.729338] #1: HD-Audio Generic at 0xfe800000 irq 67
> [ 5.730258] md: Waiting for all devices to be available before autodetect
> [ 5.731069] md: If you don't use raid, use raid=noautodetect
> [ 5.731906] md: Autodetecting RAID arrays.
> [ 5.732788] md: autorun ...
> [ 5.733570] md: ... autorun DONE.
> [ 5.734778] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem
> [ 5.858098] usb 3-1: new low-speed USB device number 2 using xhci_hcd
> [ 5.944216] EXT4-fs (sda6): mounted filesystem with ordered data mode. Quota mode: none.
> [ 5.947142] VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
> [ 5.974400] devtmpfs: mounted
> [ 5.979063] Freeing unused decrypted memory: 2036K
> [ 5.981577] Freeing unused kernel image (initmem) memory: 1884K
> [ 5.984103] Write protecting the kernel read-only data: 34816k
> [ 5.987251] Freeing unused kernel image (text/rodata gap) memory: 2032K
> [ 5.989400] Freeing unused kernel image (rodata/data gap) memory: 848K
> [ 5.991963] rodata_test: all tests were successful
> [ 5.993655] Run /sbin/init as init process
> [ 5.995954] with arguments:
> [ 5.997654] /sbin/init
> [ 5.999870] with environment:
> [ 6.002164] HOME=/
> [ 6.002969] TERM=linux
> [ 6.003676] BOOT_IMAGE=bzImage
> [ 6.023412] usb 3-1: New USB device found, idVendor=046d, idProduct=c216, bcdDevice= 3.00
> [ 6.024229] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 6.024908] usb 3-1: Product: Logitech Dual Action
> [ 6.025617] usb 3-1: Manufacturer: Logitech
> [ 6.067477] input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-1/3-1:1.0/0003:046D:C216.0001/input/input13
> [ 6.069603] logitech 0003:046D:C216.0001: input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:08:00.3-1/input0
> [ 6.185112] usb 3-2: new low-speed USB device number 3 using xhci_hcd
> [ 6.350343] usb 3-2: New USB device found, idVendor=03f0, idProduct=2a41, bcdDevice= 1.00
> [ 6.352037] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 6.353816] usb 3-2: Product: HP 1000 USB Optical Mouse
> [ 6.355470] usb 3-2: Manufacturer: PixArt
> [ 6.386800] input: PixArt HP 1000 USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-2/3-2:1.0/0003:03F0:2A41.0002/input/input14
> [ 6.390166] hid-generic 0003:03F0:2A41.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt HP 1000 USB Optical Mouse] on usb-0000:08:00.3-2/input0
> [ 6.507115] usb 3-3: new low-speed USB device number 4 using xhci_hcd
> [ 6.659353] usb 3-3: New USB device found, idVendor=0b38, idProduct=0010, bcdDevice= 1.02
> [ 6.661305] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 6.699697] input: HID 0b38:0010 as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-3/3-3:1.0/0003:0B38:0010.0003/input/input15
> [ 6.753282] hid-generic 0003:0B38:0010.0003: input,hidraw2: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:08:00.3-3/input0
> [ 6.766784] input: HID 0b38:0010 System Control as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-3/3-3:1.1/0003:0B38:0010.0004/input/input16
> [ 6.820258] input: HID 0b38:0010 Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-3/3-3:1.1/0003:0B38:0010.0004/input/input17
> [ 6.823973] hid-generic 0003:0B38:0010.0004: input,hidraw3: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:08:00.3-3/input1
> [ 6.941116] usb 3-4: new high-speed USB device number 5 using xhci_hcd
> [ 7.213497] usb 3-4: New USB device found, idVendor=07d1, idProduct=3c03, bcdDevice= 0.01
> [ 7.215764] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 7.217995] usb 3-4: Product: 802.11 bg WLAN
> [ 7.220212] usb 3-4: Manufacturer: Ralink
> [ 7.338224] usb 3-4: reset high-speed USB device number 5 using xhci_hcd
> [ 7.800095] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
> [ 7.803985] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 14.167117] udevd[361]: starting eudev-3.2.11
> [ 14.454091] udevd[391]: could not find module by name='rtc_cmos'
> [ 16.614867] r8169 0000:03:00.0 eth126: renamed from eth0
> [ 16.631390] r8169 0000:03:00.0 eth1: renamed from eth126
> [ 19.910357] Adding 1228936k swap on /dev/sda5. Priority:-2 extents:1 across:1228936k FS
> [ 21.038918] EXT4-fs (sda6): re-mounted. Quota mode: none.
> [ 30.373581] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
> [ 30.373589] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
> [ 46.104109] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
> [ 46.268209] r8169 0000:03:00.0 eth1: Link is Down
> [ 62.603310] wlan0: authenticate with e0:60:66:f0:2f:93
> [ 62.621465] wlan0: send auth to e0:60:66:f0:2f:93 (try 1/3)
> [ 62.623074] wlan0: authenticated
> [ 62.624182] wlan0: associate with e0:60:66:f0:2f:93 (try 1/3)
> [ 62.627562] wlan0: RX AssocResp from e0:60:66:f0:2f:93 (capab=0x1411 status=0 aid=2)
> [ 62.633584] wlan0: associated
> [ 62.685750] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by e0:60:66:f0:2f:93
> [ 62.754379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 68.089561] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Quota mode: none.
> [ 68.299787] EXT4-fs (sde1): mounted filesystem with ordered data mode. Quota mode: none.
> [ 166.136768] amdgpu:
> last message was failed ret is 65535
> [ 166.136774] amdgpu:
> failed to send message 145 ret is 65535
> [ 166.136778] amdgpu:
> last message was failed ret is 65535
> [ 166.136789] amdgpu:
> failed to send message 146 ret is 65535
> [ 166.136794] amdgpu:
> last message was failed ret is 65535
> [ 166.136800] amdgpu:
> failed to send message 306 ret is 65535
> [ 166.136804] amdgpu:
> last message was failed ret is 65535
> [ 166.136811] amdgpu:
> failed to send message 5e ret is 65535
> [ 166.136818] amdgpu:
> last message was failed ret is 65535
> [ 166.136825] amdgpu:
> failed to send message 148 ret is 65535
> [ 166.136833] amdgpu:
> last message was failed ret is 65535
> [ 166.136839] amdgpu:
> failed to send message 145 ret is 65535
> [ 166.136847] amdgpu:
> last message was failed ret is 65535
> [ 166.136853] amdgpu:
> failed to send message 146 ret is 65535
> [ 186.139887] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 20secs aborting
> [ 186.139892] [drm:amdgpu_atom_execute_table_locked] *ERROR* atombios stuck executing BFFE (len 62, WS 0, PS 0) @ 0xC01A
> [ 186.139894] [drm:amdgpu_atom_execute_table_locked] *ERROR* atombios stuck executing AFDE (len 1272, WS 8, PS 8) @ 0xB246
> [ 186.389536] ------------[ cut here ]------------
> [ 186.389537] WARNING: CPU: 3 PID: 1100 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:1189 dc_commit_state+0xa67/0xac0
> [ 186.389542] Modules linked in:
> [ 186.389543] CPU: 3 PID: 1100 Comm: gpm Not tainted 5.17.1+ #221
> [ 186.389546] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4011 04/19/2018
> [ 186.389547] RIP: 0010:dc_commit_state+0xa67/0xac0
> [ 186.389549] Code: c0 74 bf 48 8b 78 08 e8 67 b2 e9 ff eb b4 be 03 00 00 00 e8 6b 43 ab ff e9 3f f8 ff ff 80 b8 80 03 00 00 00 0f 84 d5 fd ff ff <0f> 0b e9 ce fd ff ff 48 89 ef e8 0a d0 00 00 48 89 ef e8 e2 8a 77
> [ 186.389551] RSP: 0018:ffffb369c209f798 EFLAGS: 00010202
> [ 186.389552] RAX: ffff941ec84e8c00 RBX: ffff941ee69e01e8 RCX: 0000000000000003
> [ 186.389554] RDX: 0000000000001220 RSI: 0000000000000c7a RDI: 0000009ac0011080
> [ 186.389555] RBP: 0000000000000000 R08: ffffb369c209f764 R09: 0000000000000465
> [ 186.389556] R10: 0000000000000000 R11: 0000000000001a60 R12: ffff941ee69e0000
> [ 186.389556] R13: ffff941ee69e3218 R14: 0000000000000001 R15: ffff941ec3e90000
> [ 186.389557] FS: 00007fb3e6356740(0000) GS:ffff9421cecc0000(0000) knlGS:0000000000000000
> [ 186.389559] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 186.389560] CR2: 0000563095fa21a8 CR3: 0000000110514000 CR4: 00000000003506e0
> [ 186.389561] Call Trace:
> [ 186.389562] <TASK>
> [ 186.389564] amdgpu_dm_atomic_commit_tail+0x55c/0x2690
> [ 186.389568] ? ttm_bo_move_memcpy+0x140/0x210
> [ 186.389571] ? amdgpu_bo_get_metadata+0x41/0x80
> [ 186.389574] ? amdgpu_bo_move+0x26c/0x7f0
> [ 186.389575] ? preempt_count_add+0x68/0xa0
> [ 186.389578] ? _raw_spin_lock+0x13/0x30
> [ 186.389581] ? unmap_mapping_pages+0x60/0x130
> [ 186.389583] ? ttm_bo_handle_move_mem+0x8d/0x190
> [ 186.389585] ? ttm_bo_validate+0xc1/0x130
> [ 186.389588] ? dm_plane_helper_prepare_fb+0x211/0x270
> [ 186.389589] ? drm_atomic_helper_setup_commit+0x1c9/0x800
> [ 186.389592] ? preempt_count_add+0x68/0xa0
> [ 186.389593] ? _raw_spin_lock_irq+0x14/0x2f
> [ 186.389595] ? _raw_spin_unlock_irq+0x13/0x30
> [ 186.389596] ? wait_for_completion_timeout+0xcd/0x100
> [ 186.389598] ? preempt_count_add+0x68/0xa0
> [ 186.389599] ? _raw_spin_lock_irq+0x14/0x2f
> [ 186.389601] commit_tail+0x94/0x120
> [ 186.389603] drm_atomic_helper_commit+0x113/0x140
> [ 186.389604] drm_client_modeset_commit_atomic+0x1e4/0x220
> [ 186.389607] drm_client_modeset_dpms+0x8c/0x210
> [ 186.389609] ? bit_cursor+0x38f/0x5d0
> [ 186.389612] drm_fb_helper_blank+0xf0/0x110
> [ 186.389614] fb_blank+0x57/0xa0
> [ 186.389616] fbcon_blank+0x1d5/0x280
> [ 186.389618] ? preempt_count_add+0x68/0xa0
> [ 186.389619] ? get_nohz_timer_target+0x18/0x1a0
> [ 186.389621] ? lock_timer_base+0x61/0x80
> [ 186.389624] ? preempt_count_add+0x68/0xa0
> [ 186.389625] ? _raw_spin_unlock_irqrestore+0x1b/0x30
> [ 186.389627] ? __mod_timer+0x204/0x3c0
> [ 186.389628] do_unblank_screen+0xaa/0x150
> [ 186.389631] set_selection_kernel+0x42/0x650
> [ 186.389633] set_selection_user+0x41/0x70
> [ 186.389634] tty_ioctl+0x379/0x8a0
> [ 186.389636] ? __do_sys_newfstatat+0x40/0x70
> [ 186.389639] __x64_sys_ioctl+0x82/0xb0
> [ 186.389642] do_syscall_64+0x3b/0x90
> [ 186.389644] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 186.389646] RIP: 0033:0x7fb3e646b418
> [ 186.389648] Code: 00 00 48 8d 44 24 08 48 89 54 24 e0 48 89 44 24 c0 48 8d 44 24 d0 48 89 44 24 c8 b8 10 00 00 00 c7 44 24 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 0e 44 89 c0 c3 66 2e 0f 1f 84 00 00 00
> [ 186.389649] RSP: 002b:00007ffde61f8da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> [ 186.389650] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fb3e646b418
> [ 186.389651] RDX: 00007ffde61f8db5 RSI: 000000000000541c RDI: 0000000000000006
> [ 186.389652] RBP: 0000000000000006 R08: 00000000000000fd R09: 0000000000000003
> [ 186.389653] R10: 0000000000001000 R11: 0000000000000246 R12: 000000000041e000
> [ 186.389653] R13: 000000000041ddc0 R14: 0000000000000001 R15: 0000000000419738
> [ 186.389655] </TASK>
> [ 186.389655] ---[ end trace 0000000000000000 ]---
> [ 186.389791] amdgpu:
> last message was failed ret is 65535
> [ 186.389797] amdgpu:
> failed to send message 148 ret is 65535
> [ 186.389802] amdgpu:
> last message was failed ret is 65535
> [ 186.389808] amdgpu:
> failed to send message 145 ret is 65535
> [ 186.389816] amdgpu:
> last message was failed ret is 65535
> [ 186.389822] amdgpu:
> failed to send message 146 ret is 65535
>
>
> -------
>
> decoded stacktrace:
> [ 186.389536] ------------[ cut here ]------------
> [ 186.389537] WARNING: CPU: 3 PID: 1100 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:1189 dc_commit_state+0xa67/0xac0
> [ 186.389542] Modules linked in:
> [ 186.389546] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4011 04/19/2018
> [ 186.389547] RIP: dc_commit_state+0xa67/0xac0
> [ 186.389549] Code: c0 74 bf 48 8b 78 08 e8 67 b2 e9 ff eb b4 be 03 00 00 00 e8 6b 43 ab ff e9 3f f8 ff ff 80 b8 80 03 00 00 00 0f 84 d5 fd ff ff <0f> 0b e9 ce fd ff ff 48 89 ef e8 0a d0 00 00 48 89 ef e8 e2 8a 77
> All code
> ========
> 0: c0 74 bf 48 8b shlb $0x8b,0x48(%rdi,%rdi,4)
> 5: 78 08 js 0xf
> 7: e8 67 b2 e9 ff call 0xffffffffffe9b273
> c: eb b4 jmp 0xffffffffffffffc2
> e: be 03 00 00 00 mov $0x3,%esi
> 13: e8 6b 43 ab ff call 0xffffffffffab4383
> 18: e9 3f f8 ff ff jmp 0xfffffffffffff85c
> 1d: 80 b8 80 03 00 00 00 cmpb $0x0,0x380(%rax)
> 24: 0f 84 d5 fd ff ff je 0xfffffffffffffdff
> 2a:* 0f 0b ud2 <-- trapping instruction
> 2c: e9 ce fd ff ff jmp 0xfffffffffffffdff
> 31: 48 89 ef mov %rbp,%rdi
> 34: e8 0a d0 00 00 call 0xd043
> 39: 48 89 ef mov %rbp,%rdi
> 3c: e8 .byte 0xe8
> 3d: e2 8a loop 0xffffffffffffffc9
> 3f: 77 .byte 0x77
>
> Code starting with the faulting instruction
> ===========================================
> 0: 0f 0b ud2
> 2: e9 ce fd ff ff jmp 0xfffffffffffffdd5
> 7: 48 89 ef mov %rbp,%rdi
> a: e8 0a d0 00 00 call 0xd019
> f: 48 89 ef mov %rbp,%rdi
> 12: e8 .byte 0xe8
> 13: e2 8a loop 0xffffffffffffff9f
> 15: 77 .byte 0x77
> [ 186.389551] RSP: 0018:ffffb369c209f798 EFLAGS: 00010202
> [ 186.389552] RAX: ffff941ec84e8c00 RBX: ffff941ee69e01e8 RCX: 0000000000000003
> [ 186.389554] RDX: 0000000000001220 RSI: 0000000000000c7a RDI: 0000009ac0011080
> [ 186.389555] RBP: 0000000000000000 R08: ffffb369c209f764 R09: 0000000000000465
> [ 186.389556] R10: 0000000000000000 R11: 0000000000001a60 R12: ffff941ee69e0000
> [ 186.389556] R13: ffff941ee69e3218 R14: 0000000000000001 R15: ffff941ec3e90000
> [ 186.389557] FS: 00007fb3e6356740(0000) GS:ffff9421cecc0000(0000) knlGS:0000000000000000
> [ 186.389559] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 186.389560] CR2: 0000563095fa21a8 CR3: 0000000110514000 CR4: 00000000003506e0
> [ 186.389561] Call Trace:
> [ 186.389562] <TASK>
> [ 186.389564] amdgpu_dm_atomic_commit_tail+0x55c/0x2690
> [ 186.389568] ? ttm_bo_move_memcpy+0x140/0x210
> [ 186.389571] ? amdgpu_bo_get_metadata+0x41/0x80
> [ 186.389574] ? amdgpu_bo_move+0x26c/0x7f0
> [ 186.389575] ? preempt_count_add+0x68/0xa0
> [ 186.389578] ? _raw_spin_lock+0x13/0x30
> [ 186.389581] ? unmap_mapping_pages+0x60/0x130
> [ 186.389583] ? ttm_bo_handle_move_mem+0x8d/0x190
> [ 186.389585] ? ttm_bo_validate+0xc1/0x130
> [ 186.389588] ? dm_plane_helper_prepare_fb+0x211/0x270
> [ 186.389589] ? drm_atomic_helper_setup_commit+0x1c9/0x800
> [ 186.389592] ? preempt_count_add+0x68/0xa0
> [ 186.389593] ? _raw_spin_lock_irq+0x14/0x2f
> [ 186.389595] ? _raw_spin_unlock_irq+0x13/0x30
> [ 186.389596] ? wait_for_completion_timeout+0xcd/0x100
> [ 186.389598] ? preempt_count_add+0x68/0xa0
> [ 186.389599] ? _raw_spin_lock_irq+0x14/0x2f
> [ 186.389601] commit_tail+0x94/0x120
> [ 186.389603] drm_atomic_helper_commit+0x113/0x140
> [ 186.389604] drm_client_modeset_commit_atomic+0x1e4/0x220
> [ 186.389607] drm_client_modeset_dpms+0x8c/0x210
> [ 186.389609] ? bit_cursor+0x38f/0x5d0
> [ 186.389612] drm_fb_helper_blank+0xf0/0x110
> [ 186.389614] fb_blank+0x57/0xa0
> [ 186.389616] fbcon_blank+0x1d5/0x280
> [ 186.389618] ? preempt_count_add+0x68/0xa0
> [ 186.389619] ? get_nohz_timer_target+0x18/0x1a0
> [ 186.389621] ? lock_timer_base+0x61/0x80
> [ 186.389624] ? preempt_count_add+0x68/0xa0
> [ 186.389625] ? _raw_spin_unlock_irqrestore+0x1b/0x30
> [ 186.389627] ? __mod_timer+0x204/0x3c0
> [ 186.389628] do_unblank_screen+0xaa/0x150
> [ 186.389631] set_selection_kernel+0x42/0x650
> [ 186.389633] set_selection_user+0x41/0x70
> [ 186.389634] tty_ioctl+0x379/0x8a0
> [ 186.389636] ? __do_sys_newfstatat+0x40/0x70
> [ 186.389639] __x64_sys_ioctl+0x82/0xb0
> [ 186.389642] do_syscall_64+0x3b/0x90
> [ 186.389644] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 186.389646] RIP: 0033:0x7fb3e646b418
> [ 186.389648] Code: 00 00 48 8d 44 24 08 48 89 54 24 e0 48 89 44 24 c0 48 8d 44 24 d0 48 89 44 24 c8 b8 10 00 00 00 c7 44 24 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 0e 44 89 c0 c3 66 2e 0f 1f 84 00 00 00
> All code
> ========
> 0: 00 00 add %al,(%rax)
> 2: 48 8d 44 24 08 lea 0x8(%rsp),%rax
> 7: 48 89 54 24 e0 mov %rdx,-0x20(%rsp)
> c: 48 89 44 24 c0 mov %rax,-0x40(%rsp)
> 11: 48 8d 44 24 d0 lea -0x30(%rsp),%rax
> 16: 48 89 44 24 c8 mov %rax,-0x38(%rsp)
> 1b: b8 10 00 00 00 mov $0x10,%eax
> 20: c7 44 24 b8 10 00 00 movl $0x10,-0x48(%rsp)
> 27: 00
> 28: 0f 05 syscall
> 2a:* 41 89 c0 mov %eax,%r8d <-- trapping instruction
> 2d: 3d 00 f0 ff ff cmp $0xfffff000,%eax
> 32: 77 0e ja 0x42
> 34: 44 89 c0 mov %r8d,%eax
> 37: c3 ret
> 38: 66 data16
> 39: 2e cs
> 3a: 0f .byte 0xf
> 3b: 1f (bad)
> 3c: 84 00 test %al,(%rax)
> ...
>
> Code starting with the faulting instruction
> ===========================================
> 0: 41 89 c0 mov %eax,%r8d
> 3: 3d 00 f0 ff ff cmp $0xfffff000,%eax
> 8: 77 0e ja 0x18
> a: 44 89 c0 mov %r8d,%eax
> d: c3 ret
> e: 66 data16
> f: 2e cs
> 10: 0f .byte 0xf
> 11: 1f (bad)
> 12: 84 00 test %al,(%rax)
> ...
> [ 186.389649] RSP: 002b:00007ffde61f8da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> [ 186.389650] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fb3e646b418
> [ 186.389651] RDX: 00007ffde61f8db5 RSI: 000000000000541c RDI: 0000000000000006
> [ 186.389652] RBP: 0000000000000006 R08: 00000000000000fd R09: 0000000000000003
> [ 186.389653] R10: 0000000000001000 R11: 0000000000000246 R12: 000000000041e000
> [ 186.389653] R13: 000000000041ddc0 R14: 0000000000000001 R15: 0000000000419738
> [ 186.389655] </TASK>
> [ 186.389655] ---[ end trace 0000000000000000 ]---
>
> -------
>
> Thanks,
> Michele Ballabio
From baffdd9347d7d70aca70b52c9f09fa9c367fc041 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@xxxxxxx>
Date: Tue, 28 Dec 2021 17:26:24 -0500
Subject: [PATCH] drm/amdgpu: don't runtime suspend if there are displays
attached (v2)

We normally runtime suspend when there are displays attached if they
are in the DPMS off state, however, if something wakes the GPU
we send a hotplug event on resume (in case any displays were connected
while the GPU was in suspend) which can cause userspace to light
up the displays again soon after they were turned off.

Prior to
commit 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."),
the driver took a runtime pm reference when the fbdev emulation was
enabled because we didn't implement proper shadowing support for
vram access when the device was off so the device never runtime
suspended when there was a console bound. Once that commit landed,
we now utilize the core fb helper implementation which properly
handles the emulation, so runtime pm now suspends in cases where it did
not before. Ultimately, we need to sort out why runtime suspend in not
working in this case for some users, but this should restore similar
behavior to before.

v2: move check into runtime_suspend

Fixes: 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 107 ++++++++++++++++--------
1 file changed, 72 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 4efaa183abcd..97a1aa02d76e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -2395,6 +2395,71 @@ static int amdgpu_pmops_restore(struct device *dev)
return amdgpu_device_resume(drm_dev, true);
}

+static int amdgpu_runtime_idle_check_display(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+ struct amdgpu_device *adev = drm_to_adev(drm_dev);
+
+ if (adev->mode_info.num_crtc) {
+ struct drm_connector *list_connector;
+ struct drm_connector_list_iter iter;
+ int ret = 0;
+
+ /* XXX: Return busy if any displays are connected to avoid
+ * possible display wake ups after runtime resume due to
+ * hotplug events in case any displays were connected while
+ * the GPU was in suspend. Remove this once that is fixed.
+ */
+ mutex_lock(&drm_dev->mode_config.mutex);
+ drm_connector_list_iter_begin(drm_dev, &iter);
+ drm_for_each_connector_iter(list_connector, &iter) {
+ if (list_connector->status == connector_status_connected) {
+ ret = -EBUSY;
+ break;
+ }
+ }
+ drm_connector_list_iter_end(&iter);
+ mutex_unlock(&drm_dev->mode_config.mutex);
+
+ if (ret)
+ return ret;
+
+ if (amdgpu_device_has_dc_support(adev)) {
+ struct drm_crtc *crtc;
+
+ drm_for_each_crtc(crtc, drm_dev) {
+ drm_modeset_lock(&crtc->mutex, NULL);
+ if (crtc->state->active)
+ ret = -EBUSY;
+ drm_modeset_unlock(&crtc->mutex);
+ if (ret < 0)
+ break;
+ }
+ } else {
+ mutex_lock(&drm_dev->mode_config.mutex);
+ drm_modeset_lock(&drm_dev->mode_config.connection_mutex, NULL);
+
+ drm_connector_list_iter_begin(drm_dev, &iter);
+ drm_for_each_connector_iter(list_connector, &iter) {
+ if (list_connector->dpms == DRM_MODE_DPMS_ON) {
+ ret = -EBUSY;
+ break;
+ }
+ }
+
+ drm_connector_list_iter_end(&iter);
+
+ drm_modeset_unlock(&drm_dev->mode_config.connection_mutex);
+ mutex_unlock(&drm_dev->mode_config.mutex);
+ }
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static int amdgpu_pmops_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
@@ -2407,6 +2472,10 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev)
return -EBUSY;
}

+ ret = amdgpu_runtime_idle_check_display(dev);
+ if (ret)
+ return ret;
+
/* wait for all rings to drain before suspending */
for (i = 0; i < AMDGPU_MAX_RINGS; i++) {
struct amdgpu_ring *ring = adev->rings[i];
@@ -2516,41 +2585,9 @@ static int amdgpu_pmops_runtime_idle(struct device *dev)
return -EBUSY;
}

- if (amdgpu_device_has_dc_support(adev)) {
- struct drm_crtc *crtc;
-
- drm_for_each_crtc(crtc, drm_dev) {
- drm_modeset_lock(&crtc->mutex, NULL);
- if (crtc->state->active)
- ret = -EBUSY;
- drm_modeset_unlock(&crtc->mutex);
- if (ret < 0)
- break;
- }
-
- } else {
- struct drm_connector *list_connector;
- struct drm_connector_list_iter iter;
-
- mutex_lock(&drm_dev->mode_config.mutex);
- drm_modeset_lock(&drm_dev->mode_config.connection_mutex, NULL);
-
- drm_connector_list_iter_begin(drm_dev, &iter);
- drm_for_each_connector_iter(list_connector, &iter) {
- if (list_connector->dpms == DRM_MODE_DPMS_ON) {
- ret = -EBUSY;
- break;
- }
- }
-
- drm_connector_list_iter_end(&iter);
-
- drm_modeset_unlock(&drm_dev->mode_config.connection_mutex);
- mutex_unlock(&drm_dev->mode_config.mutex);
- }
-
- if (ret == -EBUSY)
- DRM_DEBUG_DRIVER("failing to power off - crtc active\n");
+ ret = amdgpu_runtime_idle_check_display(dev);
+ if (ret)
+ return ret;

pm_runtime_mark_last_busy(dev);
pm_runtime_autosuspend(dev);
--
2.35.1

Next message: Nathan Chancellor: "[PATCH] arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang"
Previous message: Andy Shevchenko: "[PATCH v1 1/1] iio: light: tsl2772: Make use of device properties"
In reply to: Michele Ballabio: "Re: AMDGPU: regression on 5.17.1"
Next in thread: Michele Ballabio: "Re: AMDGPU: regression on 5.17.1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]