Re: [PATCH v2 2/8] dt-bindings: PCI: renesas-pci-usb: Convert bindings to json-schema
From: Geert Uytterhoeven
Date: Thu Apr 14 2022 - 04:29:04 EST
Hi Hervé,
On Thu, Apr 14, 2022 at 9:40 AM Herve Codina <herve.codina@xxxxxxxxxxx> wrote:
> Convert Renesas PCI bridge bindings documentation to json-schema.
> Also name it 'renesas,pci-usb' as it is specifically used to
> connect the PCI USB controllers to AHB bus.
>
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
Thanks a lot for tackling this DT binding file!
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/renesas,pci-usb.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: GPL-2.0
scripts/checkpatch.pl says:
WARNING: DT binding documents should be licensed (GPL-2.0-only OR BSD-2-Clause)
> + reg:
> + description: |
> + A list of physical regions to access the device. The first is
> + the operational registers for the OHCI/EHCI controllers and the
> + second is for the bridge configuration and control registers.
> + minItems: 2
> + maxItems: 2
reg:
items:
- description: Operational registers for the OHCI/EHCI controllers.
- description: Bridge configuration and control registers.
> +
> + interrupts:
> + description: Interrupt for the device.
maxItems: 1
The description is not needed.
> +
> + interrupt-map:
> + description: |
> + Standard property used to define the mapping of the PCI interrupts
> + to the GIC interrupts.
> +
> + interrupt-map-mask:
> + description:
> + Standard property that helps to define the interrupt mapping.
> +
> + clocks:
> + description: The reference to the device clock.
maxItems: 1
The description is not needed.
Missing "resets" and "power-domains" properties.
Missing description of the child nodes.
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-map
> + - interrupt-map-mask
> + - clocks
Missing "resets" and "power-domains".
> + - bus-range
> + - "#address-cells"
> + - "#size-cells"
> + - "#interrupt-cells"
> +
> +unevaluatedProperties: false
Why doesn't "make dtbs_check" complain about the presence of
e.g. "resets" in the actual DTS files?
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
> +
> + bus {
> + #address-cells = <2>;
> + #size-cells = <2>;
I think you should drop this (and the corresponding high addresses
below).
> +
> + pci0: pci@ee090000 {
> + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
> + device_type = "pci";
> + clocks = <&cpg CPG_MOD 703>;
> + reg = <0 0xee090000 0 0xc00>,
> + <0 0xee080000 0 0x1100>;
> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 703>;
> + status = "disabled";
> +
> + bus-range = <0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
> + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
> + interrupt-map-mask = <0xf800 0 0 0x7>;
> + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> +
> + usb@1,0 {
> + reg = <0x800 0 0 0 0>;
> + phys = <&usb0 0>;
> + phy-names = "usb";
> + };
> +
ERROR: trailing whitespace
#249: FILE: Documentation/devicetree/bindings/pci/renesas,pci-usb.yaml:127:
+ $
> + usb@2,0 {
> + reg = <0x1000 0 0 0 0>;
> + phys = <&usb0 0>;
> + phy-names = "usb";
> + };
> + };
> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds