Re: [PATCH net-next 06/12] net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver

[Russell King (Oracle)]

On Thu, Apr 14, 2022 at 02:22:44PM +0200, Clément Léger wrote:
> Add Renesas RZ/N1 advanced 5 port switch driver. This switch handles 5
> ports including 1 CPU management port. A MDIO bus is also exposed by
> this switch and allows to communicate with PHYs connected to the ports.
> Each switch port (except for the CPU management ports) are connected to
> the MII converter.
> 
> This driver include basic bridging support, more support will be added
> later (vlan, etc).

This patch looks to me like it needs to be updated...

> +static void a5psw_phylink_validate(struct dsa_switch *ds, int port,
> +				   unsigned long *supported,
> +				   struct phylink_link_state *state)
> +{
> +	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0 };
> +
> +	phylink_set_port_modes(mask);
> +
> +	phylink_set(mask, Autoneg);
> +	phylink_set(mask, Pause);
> +	phylink_set(mask, Asym_Pause);
> +
> +	phylink_set(mask, 1000baseT_Full);
> +	if (!dsa_is_cpu_port(ds, port)) {
> +		phylink_set(mask, 10baseT_Half);
> +		phylink_set(mask, 10baseT_Full);
> +		phylink_set(mask, 100baseT_Half);
> +		phylink_set(mask, 100baseT_Full);
> +	}

If the port supports e.g. RGMII (as it does via the media converter)
then it also supports 1000baseX modes as well - because a PHY attached
to the RGMII port can convert to 1000baseX.

> +
> +	linkmode_and(supported, supported, mask);
> +	linkmode_and(state->advertising, state->advertising, mask);
> +}

This basically means "I support every phy_interface_t mode that has ever
been implemented" which surely is not what you want. I doubt from the
above that you support 10GBASE-KR for example.

Please instead implement the .phylink_get_caps DSA switch interface, and
fill in the config->supported_interfaces for all interface modes that
the port supports (that including the media converter as well) and the
config->mac_capabilities members.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!