[PATCH 5.4 249/475] staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree

[Greg Kroah-Hartman]

From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>

[ Upstream commit 6256e18686158fa49e019297f990f1c1817aabf1 ]

Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the
schematics of the device for more information.

LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to
PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to
SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.

Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.

Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.

Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC1_V1.0_Schematic.pdf
Tested-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20220311090320.3068-1-arinc.unal@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/staging/mt7621-dts/gbpc1.dts | 40 +++++++++++++---------------
 1 file changed, 18 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts
index 1fb560ff059c..1713283e60d4 100644
--- a/drivers/staging/mt7621-dts/gbpc1.dts
+++ b/drivers/staging/mt7621-dts/gbpc1.dts
@@ -11,7 +11,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+		reg = <0x00000000 0x1c000000>,
+		      <0x20000000 0x04000000>;
 	};
 
 	chosen {
@@ -37,24 +38,16 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		system {
-			label = "gb-pc1:green:system";
+		power {
+			label = "green:power";
 			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
 		};
 
-		status {
-			label = "gb-pc1:green:status";
+		system {
+			label = "green:system";
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "gb-pc1:green:lan1";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "gb-pc1:green:lan2";
-			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
@@ -94,9 +87,8 @@
 
 		partition@50000 {
 			label = "firmware";
-			reg = <0x50000 0x1FB0000>;
+			reg = <0x50000 0x1fb0000>;
 		};
-
 	};
 };
 
@@ -118,9 +110,12 @@
 };
 
 &pinctrl {
-	state_default: pinctrl0 {
-		default_gpio: gpio {
-			groups = "wdt", "rgmii2", "uart3";
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: state-default {
+		gpio-pinmux {
+			groups = "rgmii2", "uart3", "wdt";
 			function = "gpio";
 		};
 	};
@@ -129,12 +124,13 @@
 &switch0 {
 	ports {
 		port@0 {
+			status = "okay";
 			label = "ethblack";
-			status = "ok";
 		};
+
 		port@4 {
+			status = "okay";
 			label = "ethblue";
-			status = "ok";
 		};
 	};
 };
-- 
2.34.1