[PATCH] staging: rtl8712: fix uninit-value "data" and "mac"

[Wang Cheng]

Due to the case that "requesttype == 0x01 && status <= 0"
isn't handled in r8712_usbctrl_vendorreq(),
"data" (drivers/staging/rtl8712/usb_ops.c:32)
will be returned without initialization.

When "tmpU1b" (drivers/staging/rtl8712/usb_intf.c:395)
is 0, mac[6] (usb_intf.c:394) won't be initialized,
which leads to accessing uninit-value on usb_intf.c:541.

Reported-and-tested-by: syzbot+6f5ecd144854c0d8580b@xxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Wang Cheng <wanngchenng@xxxxxxxxx>
---
 drivers/staging/rtl8712/usb_intf.c      |  6 +++---
 drivers/staging/rtl8712/usb_ops_linux.c | 14 ++++++++------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index ee4c61f85a07..50dcd3ecb685 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -538,13 +538,13 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
 		} else {
 			AutoloadFail = false;
 		}
-		if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
+		if ((!AutoloadFail) ||
+		    ((mac[0] == 0xff) && (mac[1] == 0xff) &&
 		     (mac[2] == 0xff) && (mac[3] == 0xff) &&
 		     (mac[4] == 0xff) && (mac[5] == 0xff)) ||
 		    ((mac[0] == 0x00) && (mac[1] == 0x00) &&
 		     (mac[2] == 0x00) && (mac[3] == 0x00) &&
-		     (mac[4] == 0x00) && (mac[5] == 0x00)) ||
-		     (!AutoloadFail)) {
+		     (mac[4] == 0x00) && (mac[5] == 0x00))) {
 			mac[0] = 0x00;
 			mac[1] = 0xe0;
 			mac[2] = 0x4c;
diff --git a/drivers/staging/rtl8712/usb_ops_linux.c b/drivers/staging/rtl8712/usb_ops_linux.c
index f984a5ab2c6f..e321ca4453ca 100644
--- a/drivers/staging/rtl8712/usb_ops_linux.c
+++ b/drivers/staging/rtl8712/usb_ops_linux.c
@@ -495,12 +495,14 @@ int r8712_usbctrl_vendorreq(struct intf_priv *pintfpriv, u8 request, u16 value,
 	}
 	status = usb_control_msg(udev, pipe, request, reqtype, value, index,
 				 pIo_buf, len, 500);
-	if (status > 0) {  /* Success this control transfer. */
-		if (requesttype == 0x01) {
-			/* For Control read transfer, we have to copy the read
-			 * data from pIo_buf to pdata.
-			 */
-			memcpy(pdata, pIo_buf,  status);
+	/* For Control read transfer, copy the read data from pIo_buf to pdata
+	 * when control transfer success; otherwise init *pdata with 0.
+	 */
+	if (requesttype == 0x01) {
+		if (status > 0)
+			memcpy(pdata, pIo_buf, status);
+		else
+			*(u32 *)pdata = 0;
 		}
 	}
 	kfree(palloc_buf);
-- 
2.33.1