Re: peak_usb: urb aborted

[Paul Thomas]

> On 08.04.22 18:35, Paul Thomas wrote:
> > Folks,
> >
> > I'm using a PCAN-USB adapter, and it seems to have a lot of trouble
> > under medium load. I'm getting these urb aborted messages.
> > [125054.082248] peak_usb 3-2.4.4:1.0 can0: Rx urb aborted (-71)
> > [125077.886850] peak_usb 3-2.4.4:1.0 can0: Rx urb aborted (-32)
>
> As I run the same hardware here it is very likely that you have a faulty
> CAN bus setup with
>
> - wrong bitrate setting / sample points / etc
> - wrong or no termination
> - missing or wrong configured (other) CAN nodes
Thanks Oliver, this might have been it, I'm using 1Mbit (up from
100kbit) on a different board, and not getting those errors.

>
> I added the maintainer of the PEAK USB adapter (Stephane) to the
> recipient list.
>
> Having the linux-can mailing list and Stephane in the recipient list is
> sufficient to answer the above details.
>
> Regards,
> Oliver
>