Re: [PATCH V10 4/9] mfd: pm8008: Add reset-gpios

[Stephen Boyd]

Quoting Satya Priya (2022-04-14 05:30:13)
> diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
> index c472d7f..97a72da 100644
> --- a/drivers/mfd/qcom-pm8008.c
> +++ b/drivers/mfd/qcom-pm8008.c
> @@ -239,6 +241,13 @@ static int pm8008_probe(struct i2c_client *client)
>                         dev_err(chip->dev, "Failed to probe irq periphs: %d\n", rc);
>         }
>
> +       chip->reset_gpio = devm_gpiod_get(chip->dev, "reset", GPIOD_OUT_HIGH);
> +       if (IS_ERR(chip->reset_gpio)) {
> +               dev_err(chip->dev, "failed to acquire reset gpio\n");

The API looks to print debug messages. This print doesn't look required.

> +               return PTR_ERR(chip->reset_gpio);
> +       }
> +       gpiod_set_value(chip->reset_gpio, 1);

Does this do anything? Does this work just as well?

	reset_gpio = devm_gpiod_get(chip->dev, "reset", GPIOD_OUT_LOW);
	if (IS_ERR(reset_gpio))
		return PTR_ERR(reset_gpio);

Note that there's no point to store the reset gpio in the structure if
it won't be used outside of probe. This should work fine? I used
GPIOD_OUT_LOW to indicate that the reset should be returned to this
function deasserted, i.e. taking the PMIC out of reset.

> +
>         return devm_of_platform_populate(chip->dev);