Re: [PATCH v2 1/3] SPI: Ingenic: Add support for use GPIO as chip select line.

[Paul Cercueil]

Hi Zhou,

Le sam., avril 23 2022 at 03:09:41 +0800, 周琰杰 (Zhou Yanjie) 
<zhouyanjie@xxxxxxxxxxxxxx> a écrit :
> Add support for using GPIOs as chip select lines on Ingenic SoCs.
>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
> ---
>
> Notes:
>     v1->v2:
>     Use "device_property_read_u32()" instead
>     "of_property_read_u32()" as Paul Cercueil's suggestion.
>
>  drivers/spi/spi-ingenic.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-ingenic.c b/drivers/spi/spi-ingenic.c
> index 03077a7..bb512ca 100644
> --- a/drivers/spi/spi-ingenic.c
> +++ b/drivers/spi/spi-ingenic.c
> @@ -380,7 +380,7 @@ static int spi_ingenic_probe(struct 
> platform_device *pdev)
>  	struct spi_controller *ctlr;
>  	struct ingenic_spi *priv;
>  	void __iomem *base;
> -	int ret;
> +	int num_cs, ret;
>
>  	pdata = of_device_get_match_data(dev);
>  	if (!pdata) {
> @@ -416,6 +416,11 @@ static int spi_ingenic_probe(struct 
> platform_device *pdev)
>  	if (IS_ERR(priv->flen_field))
>  		return PTR_ERR(priv->flen_field);
>
> +	if (device_property_read_u32(dev, "num-cs", &num_cs)) {
> +		dev_warn(dev, "Number of chip select lines not specified.\n");
> +		num_cs = 2;

The "num-cs" property is not required in the binding, so I don't think 
the dev_warn() is warranted. Just silently set num_cs = 2.

With this addressed:
Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>

Cheers,
-Paul

> +	}
> +
>  	platform_set_drvdata(pdev, ctlr);
>
>  	ctlr->prepare_transfer_hardware = spi_ingenic_prepare_hardware;
> @@ -429,7 +434,9 @@ static int spi_ingenic_probe(struct 
> platform_device *pdev)
>  	ctlr->bits_per_word_mask = pdata->bits_per_word_mask;
>  	ctlr->min_speed_hz = 7200;
>  	ctlr->max_speed_hz = 54000000;
> -	ctlr->num_chipselect = 2;
> +	ctlr->use_gpio_descriptors = true;
> +	ctlr->max_native_cs = 2;
> +	ctlr->num_chipselect = num_cs;
>  	ctlr->dev.of_node = pdev->dev.of_node;
>
>  	if (spi_ingenic_request_dma(ctlr, dev))
> --
> 2.7.4