Re: [PATCH v2] hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk
From: Guenter Roeck
Date: Sun Apr 24 2022 - 12:06:42 EST
On Sun, Apr 24, 2022 at 12:14:22AM -0500, Jack Doan wrote:
> Extend aquacomputer_d5next driver to expose hardware
> temperature sensors of the Aquacomputer Farbwerk RGB controller, which
> communicates through a proprietary USB HID protocol.
>
> Four temperature sensors are available. Additionally, serial number and
> firmware version are exposed through debugfs.
>
> Also, add Jack Doan to MAINTAINERS for this driver.
>
> Signed-off-by: Jack Doan <me@xxxxxxxxxxxx>
> Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>
Applied.
Thanks,
Guenter
> ---
> Changes in v2:
> - update Kconfig so it applies cleanly
> - add "select CRC16" to Kconfig
> ---
> Documentation/hwmon/aquacomputer_d5next.rst | 3 +-
> MAINTAINERS | 1 +
> drivers/hwmon/Kconfig | 5 +--
> drivers/hwmon/aquacomputer_d5next.c | 37 ++++++++++++++++++---
> 4 files changed, 38 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
> index e69f718caf5b..717e28226cde 100644
> --- a/Documentation/hwmon/aquacomputer_d5next.rst
> +++ b/Documentation/hwmon/aquacomputer_d5next.rst
> @@ -6,6 +6,7 @@ Kernel driver aquacomputer-d5next
> Supported devices:
>
> * Aquacomputer D5 Next watercooling pump
> +* Aquacomputer Farbwerk RGB controller
> * Aquacomputer Farbwerk 360 RGB controller
> * Aquacomputer Octo fan controller
>
> @@ -32,7 +33,7 @@ better suited for userspace tools.
> The Octo exposes four temperature sensors and eight PWM controllable fans, along
> with their speed (in RPM), power, voltage and current.
>
> -The Farbwerk 360 exposes four temperature sensors. Depending on the device,
> +The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
> not all sysfs and debugfs entries will be available.
>
> Usage notes
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fd768d43e048..c5cd8dd866ee 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1446,6 +1446,7 @@ F: drivers/media/i2c/aptina-pll.*
>
> AQUACOMPUTER D5 NEXT PUMP SENSOR DRIVER
> M: Aleksa Savic <savicaleksa83@xxxxxxxxx>
> +M: Jack Doan <me@xxxxxxxxxxxx>
> L: linux-hwmon@xxxxxxxxxxxxxxx
> S: Maintained
> F: Documentation/hwmon/aquacomputer_d5next.rst
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 1f1bb4d858cb..4a6d6c5b9b69 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -256,13 +256,14 @@ config SENSORS_AHT10
> will be called aht10.
>
> config SENSORS_AQUACOMPUTER_D5NEXT
> - tristate "Aquacomputer D5 Next, Octo and Farbwerk 360"
> + tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360"
> depends on USB_HID
> select CRC16
> help
> If you say yes here you get support for sensors and fans of
> the Aquacomputer D5 Next watercooling pump, Octo fan
> - controller and Farbwerk 360 RGB controller, where available.
> + controller, Farbwerk and Farbwerk 360 RGB controllers, where
> + available.
>
> This driver can also be built as a module. If so, the module
> will be called aquacomputer_d5next.
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index a464473bc981..7d2e7279abfb 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -1,11 +1,12 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> - * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk 360, Octo)
> + * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
> *
> * Aquacomputer devices send HID reports (with ID 0x01) every second to report
> * sensor values.
> *
> * Copyright 2021 Aleksa Savic <savicaleksa83@xxxxxxxxx>
> + * Copyright 2022 Jack Doan <me@xxxxxxxxxxxx>
> */
>
> #include <linux/crc16.h>
> @@ -19,14 +20,16 @@
> #include <asm/unaligned.h>
>
> #define USB_VENDOR_ID_AQUACOMPUTER 0x0c70
> +#define USB_PRODUCT_ID_FARBWERK 0xf00a
> #define USB_PRODUCT_ID_D5NEXT 0xf00e
> #define USB_PRODUCT_ID_FARBWERK360 0xf010
> #define USB_PRODUCT_ID_OCTO 0xf011
>
> -enum kinds { d5next, farbwerk360, octo };
> +enum kinds { d5next, farbwerk, farbwerk360, octo };
>
> static const char *const aqc_device_names[] = {
> [d5next] = "d5next",
> + [farbwerk] = "farbwerk",
> [farbwerk360] = "farbwerk360",
> [octo] = "octo"
> };
> @@ -69,6 +72,12 @@ static u8 secondary_ctrl_report[] = {
> #define D5NEXT_PUMP_CURRENT 112
> #define D5NEXT_FAN_CURRENT 99
>
> +/* Register offsets for the Farbwerk RGB controller */
> +#define FARBWERK_NUM_SENSORS 4
> +#define FARBWERK_SENSOR_START 0x2f
> +#define FARBWERK_SENSOR_SIZE 0x02
> +#define FARBWERK_SENSOR_DISCONNECTED 0x7FFF
> +
> /* Register offsets for the Farbwerk 360 RGB controller */
> #define FARBWERK360_NUM_SENSORS 4
> #define FARBWERK360_SENSOR_START 0x32
> @@ -125,7 +134,7 @@ static const char *const label_d5next_current[] = {
> "Fan current"
> };
>
> -/* Labels for Farbwerk 360 and Octo temperature sensors */
> +/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
> static const char *const label_temp_sensors[] = {
> "Sensor 1",
> "Sensor 2",
> @@ -319,6 +328,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
> if (channel == 0)
> return 0444;
> break;
> + case farbwerk:
> case farbwerk360:
> case octo:
> return 0444;
> @@ -551,8 +561,7 @@ static const struct hwmon_chip_info aqc_chip_info = {
> .info = aqc_info,
> };
>
> -static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
> - int size)
> +static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
> {
> int i, sensor_value;
> struct aqc_data *priv;
> @@ -587,6 +596,17 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
> priv->current_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_CURRENT);
> priv->current_input[1] = get_unaligned_be16(data + D5NEXT_FAN_CURRENT);
> break;
> + case farbwerk:
> + /* Temperature sensor readings */
> + for (i = 0; i < FARBWERK_NUM_SENSORS; i++) {
> + sensor_value = get_unaligned_be16(data + FARBWERK_SENSOR_START +
> + i * FARBWERK_SENSOR_SIZE);
> + if (sensor_value == FARBWERK_SENSOR_DISCONNECTED)
> + priv->temp_input[i] = -ENODATA;
> + else
> + priv->temp_input[i] = sensor_value * 10;
> + }
> + break;
> case farbwerk360:
> /* Temperature sensor readings */
> for (i = 0; i < FARBWERK360_NUM_SENSORS; i++) {
> @@ -733,6 +753,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
> priv->voltage_label = label_d5next_voltages;
> priv->current_label = label_d5next_current;
> break;
> + case USB_PRODUCT_ID_FARBWERK:
> + priv->kind = farbwerk;
> +
> + priv->temp_label = label_temp_sensors;
> + break;
> case USB_PRODUCT_ID_FARBWERK360:
> priv->kind = farbwerk360;
>
> @@ -795,6 +820,7 @@ static void aqc_remove(struct hid_device *hdev)
>
> static const struct hid_device_id aqc_table[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
> { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
> { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
> { }
> @@ -826,4 +852,5 @@ module_exit(aqc_exit);
>
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Aleksa Savic <savicaleksa83@xxxxxxxxx>");
> +MODULE_AUTHOR("Jack Doan <me@xxxxxxxxxxxx>");
> MODULE_DESCRIPTION("Hwmon driver for Aquacomputer devices");