[PATCH v1 1/2] drm/msm/dp: reset DP controller before transmit phy test pattern

[Kuogee Hsieh]

DP controller state can not switch from video ready state to
transmit phy pattern state at run time. DP mainlink has to be
teared down followed by reset controller to default state to have
DP controller switch to transmit phy test pattern state and start
generate specified phy test pattern to sinker once main link setup
again.

Fixes: ee35444be0c8 ("drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run")
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 5356856..193cc1a 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1532,7 +1532,7 @@ static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
 	 * running. Add the global reset just before disabling the
 	 * link clocks and core clocks.
 	 */
-	ret = dp_ctrl_off_link_stream(&ctrl->dp_ctrl);
+	ret = dp_ctrl_off(&ctrl->dp_ctrl);
 	if (ret) {
 		DRM_ERROR("failed to disable DP controller\n");
 		return ret;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project