Re: [PATCH v3 0/7] mm: demotion: Introduce new node state N_DEMOTION_TARGETS

[Jonathan Cameron]

On Mon, 25 Apr 2022 20:14:58 +0530
Aneesh Kumar K V <aneesh.kumar@xxxxxxxxxxxxx> wrote:

> On 4/25/22 7:27 PM, Jonathan Cameron wrote:
> > On Mon, 25 Apr 2022 16:45:38 +0530
> > Jagdish Gediya <jvgediya@xxxxxxxxxxxxx> wrote:
> >   
> >> On Sun, Apr 24, 2022 at 11:19:53AM +0800, ying.huang@xxxxxxxxx wrote:  
> >>> On Sat, 2022-04-23 at 01:25 +0530, Jagdish Gediya wrote:  
> >>>> Some systems(e.g. PowerVM) can have both DRAM(fast memory) only
> >>>> NUMA node which are N_MEMORY and slow memory(persistent memory)
> >>>> only NUMA node which are also N_MEMORY. As the current demotion
> >>>> target finding algorithm works based on N_MEMORY and best distance,
> >>>> it will choose DRAM only NUMA node as demotion target instead of
> >>>> persistent memory node on such systems. If DRAM only NUMA node is
> >>>> filled with demoted pages then at some point new allocations can
> >>>> start falling to persistent memory, so basically cold pages are in
> >>>> fast memor (due to demotion) and new pages are in slow memory, this
> >>>> is why persistent memory nodes should be utilized for demotion and
> >>>> dram node should be avoided for demotion so that they can be used
> >>>> for new allocations.
> >>>>
> >>>> Current implementation can work fine on the system where the memory
> >>>> only numa nodes are possible only for persistent/slow memory but it
> >>>> is not suitable for the like of systems mentioned above.  
> >>>
> >>> Can you share the NUMA topology information of your machine?  And the
> >>> demotion order before and after your change?
> >>>
> >>> Whether it's good to use the PMEM nodes as the demotion targets of the
> >>> DRAM-only node too?  
> >>
> >> $ numactl -H
> >> available: 2 nodes (0-1)
> >> node 0 cpus: 0 1 2 3 4 5 6 7
> >> node 0 size: 14272 MB
> >> node 0 free: 13392 MB
> >> node 1 cpus:
> >> node 1 size: 2028 MB
> >> node 1 free: 1971 MB
> >> node distances:
> >> node   0   1
> >>    0:  10  40
> >>    1:  40  10
> >>
> >> 1) without N_DEMOTION_TARGETS patch series, 1 is demotion target
> >>     for 0 even when 1 is DRAM node and there is no demotion targets for 1.  
> > 
> > I'm not convinced the distinction between DRAM and persistent memory is
> > valid. There will definitely be systems with a large pool
> > of remote DRAM (and potentially no NV memory) where the right choice
> > is to demote to that DRAM pool.
> > 
> > Basing the decision on whether the memory is from kmem or
> > normal DRAM doesn't provide sufficient information to make the decision.
> >   
> 
> Hence the suggestion for the ability to override this from userspace. 
> Now, for example, we could build a system with memory from the remote 
> machine (memory inception in case of power which will mostly be plugged 
> in as regular hotpluggable memory ) and a slow CXL memory or OpenCAPI 
> memory.
> 
> In the former case, we won't consider that for demotion with this series 
> because that is not instantiated via dax kmem. So yes definitely we 
> would need the ability to override this from userspace so that we could 
> put these remote memory NUMA nodes as demotion targets if we want.


Agreed.  I would like to have a better 'guess' at the right default
though if possible.  With hindsight my instinct would have been to
have a default of no demotion path at all and hence ensure distros will carry
appropriate userspace setup scripts.  Ah well, too late :)

> 
> >>
> >> $ cat /sys/bus/nd/devices/dax0.0/target_node
> >> 2
> >> $
> >> # cd /sys/bus/dax/drivers/
> >> :/sys/bus/dax/drivers# ls
> >> device_dax  kmem
> >> :/sys/bus/dax/drivers# cd device_dax/
> >> :/sys/bus/dax/drivers/device_dax# echo dax0.0 > unbind
> >> :/sys/bus/dax/drivers/device_dax# echo dax0.0 >  ../kmem/new_id
> >> :/sys/bus/dax/drivers/device_dax# numactl -H
> >> available: 3 nodes (0-2)
> >> node 0 cpus: 0 1 2 3 4 5 6 7
> >> node 0 size: 14272 MB
> >> node 0 free: 13380 MB
> >> node 1 cpus:
> >> node 1 size: 2028 MB
> >> node 1 free: 1961 MB
> >> node 2 cpus:
> >> node 2 size: 0 MB
> >> node 2 free: 0 MB
> >> node distances:
> >> node   0   1   2
> >>    0:  10  40  80
> >>    1:  40  10  80
> >>    2:  80  80  10
> >>
> >> 2) Once this new node brought online,  without N_DEMOTION_TARGETS
> >> patch series, 1 is demotion target for 0 and 2 is demotion target
> >> for 1.
> >>
> >> With this patch series applied,
> >> 1) No demotion target for either 0 or 1 before dax device is online  
> > 
> > I'd argue that is wrong.  At this state you have a tiered memory system
> > be it one with just DRAM.  Using it as such is correct behavior that
> > we should not be preventing.  Sure some usecases wouldn't want that
> > arrangement but some do want it.
> > 
> > For your case we could add a heuristic along the lines of the demotion
> > target should be at least as big as the starting point but that would
> > be a bit hacky.
> >   
> 
> Hence the proposal to do a per node demotion target override with the 
> semantics that i explained here
> 
> 
> https://lore.kernel.org/linux-mm/8735i1zurt.fsf@xxxxxxxxxxxxx/
> 
> Let me know if that interface would be good to handle all the possible 
> demotion target configs we would want to have.

At first glance it looks good to me.

Jonathan

> 
> -aneesh