Re: [PATCH net-next 4/5] net: dt-bindings: Introduce the Qualcomm IPQESS Ethernet controller

From: Maxime Chevallier
Date: Tue Apr 26 2022 - 10:02:16 EST


Hi Krzysztof

On Sat, 23 Apr 2022 19:49:30 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> wrote:

Thanks a lot for the review, I'll address all your comments in a V2.

> On 22/04/2022 20:03, Maxime Chevallier wrote:
> > Add the DT binding for the IPQESS Ethernet Controller. This is a
> > simple controller, only requiring the phy-mode, interrupts, clocks,
> > and possibly a MAC address setting.
> >
> > Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/net/qcom,ipqess.yaml | 94
> > +++++++++++++++++++ 1 file changed, 94 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> > b/Documentation/devicetree/bindings/net/qcom,ipqess.yaml new file
> > mode 100644 index 000000000000..8fec5633692f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> > @@ -0,0 +1,94 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/qcom,ipqess.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm IPQ ESS EDMA Ethernet Controller Device Tree
> > Bindings
>
> s/Device Tree Bindings//
>
> > +
> > +allOf:
> > + - $ref: "ethernet-controller.yaml#"
>
> allOf goes after maintainers.
>
> > +
> > +maintainers:
> > + - Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
> > +
> > +properties:
> > + compatible:
> > + const: qcom,ipq4019e-ess-edma
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + minItems: 2
> > + maxItems: 32
> > + description: One interrupt per tx and rx queue, with up to 16
> > queues. +
> > + clocks:
> > + maxItems: 1
> > +
> > + phy-mode: true
> > +
> > + fixed-link: true
> > +
> > + mac-address: true
>
> You don't need all these three. They come from ethernet-controller and
> you use unevaluatedProperties.
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - phy-mode
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + gmac: ethernet@c080000 {
> > + compatible = "qcom,ipq4019-ess-edma";
> > + reg = <0xc080000 0x8000>;
> > + interrupts = <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
> > +
> > + status = "okay";
>
> No status in the example.
>
> > +
> > + phy-mode = "internal";
> > + fixed-link {
> > + speed = <1000>;
> > + full-duplex;
> > + pause;
> > + asym-pause;
> > + };
> > + };
> > +
> > +...
>
>
> Best regards,
> Krzysztof

Best Regards,

Maxime