Re: [PATCH v3] drm/display: Select DP helper for DRM_DP_AUX_CHARDEV and DRM_DP_CEC

[Thomas Zimmermann]

Hi

Am 28.04.22 um 10:22 schrieb Javier Martinez Canillas:
> The DRM_DP_AUX_CHARDEV and DRM_DP_CEC Kconfig symbols enable code that use
> DP helper functions, that are only present if CONFIG_DRM_DISPLAY_DP_HELPER
> is also enabled.
>
> But these don't select the DRM_DISPLAY_DP_HELPER symbol, meaning that it
> is possible to enable any of them without CONFIG_DRM_DISPLAY_DP_HELPER.
>
> That will lead to the following linking errors with the mentioned config:
>
>    LD      vmlinux.o
>    MODPOST vmlinux.symvers
>    MODINFO modules.builtin.modinfo
>    GEN     modules.builtin
>    LD      .tmp_vmlinux.kallsyms1
>    KSYMS   .tmp_vmlinux.kallsyms1.S
>    AS      .tmp_vmlinux.kallsyms1.S
>    LD      .tmp_vmlinux.kallsyms2
>    KSYMS   .tmp_vmlinux.kallsyms2.S
>    AS      .tmp_vmlinux.kallsyms2.S
>    LD      vmlinux
>    SYSMAP  System.map
>    SORTTAB vmlinux
>    OBJCOPY arch/arm64/boot/Image
>    MODPOST modules-only.symvers
> ERROR: modpost: "drm_dp_dpcd_write" [drivers/gpu/drm/display/drm_display_helper.ko] undefined!
> ERROR: modpost: "drm_dp_read_desc" [drivers/gpu/drm/display/drm_display_helper.ko] undefined!
> ERROR: modpost: "drm_dp_dpcd_read" [drivers/gpu/drm/display/drm_display_helper.ko] undefined!
> make[1]: *** [scripts/Makefile.modpost:134: modules-only.symvers] Error 1
> make[1]: *** Deleting file 'modules-only.symvers'
> make: *** [Makefile:1749: modules] Error 2
>
> Besides making these symbols to select CONFIG_DRM_DISPLAY_DP_HELPER, make
> them to depend on DRM_DISPLAY_HELPER, since can't be enabled without it.
>
> Note: It seems this has been an issue for a long time but was made easier
> to reproduce after the commit 1e0f66420b13 ("drm/display: Introduce a DRM
> display-helper module"). Adding a Fixes: tag just to make sure that this
> fix will be picked for stable once the mentioned change also lands there.
>
> Fixes: 1e0f66420b13 ("drm/display: Introduce a DRM display-helper module")
> Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
> ---
>
> Changes in v3:
> - Also make DRM_DP_AUX_CHARDEV and DRM_DP_CEC depend on DRM_DISPLAY_HELPER
>    (Thomas Zimmermann).
>
> Changes in v2:
> - Explain better the issue in the change description.
> - Only select DRM_DISPLAY_DP_HELPER and not DRM_DISPLAY_HELPER.
>
>   drivers/gpu/drm/display/Kconfig | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/display/Kconfig b/drivers/gpu/drm/display/Kconfig
> index f84f1b0cd23f..1b6e6af37546 100644
> --- a/drivers/gpu/drm/display/Kconfig
> +++ b/drivers/gpu/drm/display/Kconfig
> @@ -31,7 +31,8 @@ config DRM_DISPLAY_HDMI_HELPER
>   
>   config DRM_DP_AUX_CHARDEV
>   	bool "DRM DP AUX Interface"
> -	depends on DRM
> +	depends on DRM && DRM_DISPLAY_HELPER
> +	select DRM_DISPLAY_DP_HELPER

I'd be OK with that, but I'm still wondering why you're not making it 
depend on DRM_DISPLAY_DP_HELPER.  If a config only enables HDMI (without 
DP), these options would still show up.


>   	help
>   	  Choose this option to enable a /dev/drm_dp_auxN node that allows to
>   	  read and write values to arbitrary DPCD registers on the DP aux
> @@ -39,7 +40,8 @@ config DRM_DP_AUX_CHARDEV
>   
>   config DRM_DP_CEC
>   	bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
> -	depends on DRM
> +	depends on DRM && DRM_DISPLAY_HELPER
> +	select DRM_DISPLAY_DP_HELPER

Same here.

Best regards
Thomas

>   	select CEC_CORE
>   	help
>   	  Choose this option if you want to enable HDMI CEC support for

--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev

Attachment: OpenPGP_signature
Description: OpenPGP digital signature