[PATCH 2/5] regulator: pca9450: Make I2C Level Translator configurable

[Rickard Andersson]

From: Per-Daniel Olsson <perdo@xxxxxxxx>

Make the I2C Level Translator included in PCA9450 configurable from
devicetree. The reset state is off. By setting nxp,i2c-lt-enable, the
I2C Level Translator will be enabled while in STANDBY or RUN state.

Signed-off-by: Per-Daniel Olsson <perdo@xxxxxxxx>
---
 drivers/regulator/pca9450-regulator.c | 11 +++++++++++
 include/linux/regulator/pca9450.h     |  7 +++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 64e5f5f0cc84..87b4e6e29ba1 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -810,6 +810,17 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	if (of_property_read_bool(i2c->dev.of_node, "nxp,i2c-lt-enable")) {
+		/* Enable I2C Level Translator */
+		ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_CONFIG2,
+					 I2C_LT_MASK, I2C_LT_ON_STANDBY_RUN);
+		if (ret) {
+			dev_err(&i2c->dev,
+				"Failed to enable I2C level translator\n");
+			return ret;
+		}
+	}
+
 	/*
 	 * The driver uses the LDO5CTRL_H register to control the LDO5 regulator.
 	 * This is only valid if the SD_VSEL input of the PMIC is high. Let's
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index 71902f41c919..3c01c2bf84f5 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -226,4 +226,11 @@ enum {
 #define WDOG_B_CFG_COLD_LDO12		0x80
 #define WDOG_B_CFG_COLD			0xC0
 
+/* PCA9450_REG_CONFIG2 bits */
+#define I2C_LT_MASK			0x03
+#define I2C_LT_FORCE_DISABLE		0x00
+#define I2C_LT_ON_STANDBY_RUN		0x01
+#define I2C_LT_ON_RUN			0x02
+#define I2C_LT_FORCE_ENABLE		0x03
+
 #endif /* __LINUX_REG_PCA9450_H__ */
-- 
2.20.1