Re: [PATCH 2/2] irqchip: Add RZ/G2L IA55 Interrupt Controller driver

[Lad, Prabhakar]

Hi Geert,

Thank you for the review.

On Thu, Apr 28, 2022 at 10:42 AM Geert Uytterhoeven
<geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> On Fri, Apr 22, 2022 at 12:12 AM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > Add a driver for the Renesas RZ/G2L Interrupt Controller.
> >
> > This supports external pins being used as interrupts. It supports
> > one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
> > to be used as IRQ lines.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- /dev/null
> > +++ b/drivers/irqchip/irq-renesas-rzg2l.c
> > @@ -0,0 +1,447 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Renesas RZ/G2L IRQC Driver
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corporation.
> > + *
> > + * Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/io.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/of_address.h>
> > +#include <linux/reset.h>
> > +#include <linux/spinlock.h>
> > +
> > +#define IRQC_IRQ_START                 1
> > +#define IRQC_IRQ_COUNT                 8
> > +#define IRQC_TINT_START                        9
>
> = IRQC_IRQ_START + IRQC_IRQ_COUNT
>
OK

> > +#define IRQC_TINT_COUNT                        32
> > +#define IRQC_NUM_IRQ                   41
>
> = IRQC_TINT_START + IRQC_TINT_COUNT
>
OK.

> Should these be in a DT binding header file?
>
> Combining all types into a single linear number space makes it hard
> to extend the range, when reusing for an SoC that supports more
> interrupt sources.
>
Or  DT data maybe?

> > +static void rzg2l_irq_eoi(struct irq_data *d)
> > +{
> > +       struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
> > +       unsigned int hw_irq = irqd_to_hwirq(d) - IRQC_IRQ_START;
> > +       u16 bit = BIT(hw_irq);
>
> I guess you can just use u32?
>
OK, will do

> > +       u32 reg;
> > +
> > +       reg = readl_relaxed(priv->base + ISCR);
> > +       if (reg & bit)
> > +               writel_relaxed(GENMASK(IRQC_IRQ_COUNT - 1, 0) & ~bit,
>
> As writes to the unused upper bits are ignored, you can drop the
> masking with GENMASK(IRQC_IRQ_COUNT - 1, 0), and be prepared for more
> interrupt sources.
>
Agreed.

> > +                              priv->base + ISCR);
> > +}
> > +
> > +static void rzg2l_tint_eoi(struct irq_data *d)
> > +{
> > +       struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
> > +       unsigned int hw_irq = irqd_to_hwirq(d);
>
> "irqd_to_hwirq(d) - IRQC_TINT_START", for symmetry with
> rzg2l_irq_eoi()?
>
OK.

> > +       u32 bit = BIT(hw_irq - IRQC_TINT_START);
> > +       u32 reg;
> > +
> > +       reg = readl_relaxed(priv->base + TSCR);
> > +       if (reg & bit)
> > +               writel_relaxed(GENMASK(IRQC_TINT_COUNT - 1, 0) & ~bit,
>
> Drop the masking with all-ones?
>
You mean instead of a mask just use the reg instead?

Cheers,
Prabhakar

> > +                              priv->base + TSCR);
> > +}
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds