[PATCH 2/2] dt-bindings: mtd: qcom_nandc: document qcom,boot_pages binding

[Ansuel Smith]

Document new qcom,boot_pages binding used to apply special
read/write configuration to boot pages.

QCOM apply a special configuration where spare data is not protected
by ECC for some special pages (used for boot partition). Add
Documentation on how to declare these special pages.

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
 .../devicetree/bindings/mtd/qcom,nandc.yaml         | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 84ad7ff30121..ef243109689d 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -78,6 +78,17 @@ allOf:
             Must contain the ADM data type CRCI block instance number
             specified for the NAND controller on the given platform
 
+        qcom,boot_pages:
+          $ref: /schemas/types.yaml#/definitions/uint32-array
+          description:
+            Some special page used by boot partition have spare data
+            not protected by ECC. Use this to declare these special page
+            by defining first the offset and then the size.
+
+            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+
+            Refer to the ipq8064 example on how to use this special binding.
+
   - if:
       properties:
         compatible:
@@ -135,6 +146,8 @@ examples:
         nand-ecc-strength = <4>;
         nand-bus-width = <8>;
 
+        qcom,boot_pages = <0x0 0x58a0000>;
+
         partitions {
           compatible = "fixed-partitions";
           #address-cells = <1>;
-- 
2.34.1