[PATCH] MIPS: fix typos in comments

From: Julia Lawall
Date: Sat Apr 30 2022 - 15:03:46 EST


Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@xxxxxxxx>

---
arch/mips/alchemy/common/dbdma.c | 2 +-
arch/mips/cavium-octeon/executive/cvmx-bootmem.c | 2 +-
arch/mips/cavium-octeon/executive/cvmx-pko.c | 2 +-
arch/mips/cavium-octeon/octeon-irq.c | 2 +-
arch/mips/cavium-octeon/octeon-usb.c | 2 +-
arch/mips/dec/ioasic-irq.c | 4 ++--
arch/mips/dec/setup.c | 2 +-
arch/mips/fw/arc/memory.c | 2 +-
arch/mips/jazz/irq.c | 2 +-
arch/mips/kernel/cmpxchg.c | 2 +-
arch/mips/kernel/cpu-probe.c | 2 +-
arch/mips/kernel/idle.c | 2 +-
arch/mips/kernel/perf_event_mipsxx.c | 2 +-
arch/mips/kvm/tlb.c | 2 +-
arch/mips/net/bpf_jit_comp32.c | 2 +-
arch/mips/pci/pcie-octeon.c | 2 +-
arch/mips/pic32/pic32mzda/config.c | 2 +-
arch/mips/tools/loongson3-llsc-check.c | 2 +-
arch/mips/txx9/generic/pci.c | 2 +-
19 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 1641d274fe37..c4d6b09136b1 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -329,7 +329,7 @@ static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
for (i = mipspmu.num_counters - 1; i >= 0; i--) {
/*
* Note that some MIPS perf events can be counted by both
- * even and odd counters, wheresas many other are only by
+ * even and odd counters, whereas many other are only by
* even _or_ odd counters. This introduces an issue that
* when the former kind of event takes the counter the
* latter kind of event wants to use, then the "counter
diff --git a/arch/mips/kvm/tlb.c b/arch/mips/kvm/tlb.c
index a3b50d5e3b25..4e91971daae1 100644
--- a/arch/mips/kvm/tlb.c
+++ b/arch/mips/kvm/tlb.c
@@ -153,7 +153,7 @@ EXPORT_SYMBOL_GPL(kvm_vz_host_tlb_inv);
* kvm_vz_guest_tlb_lookup() - Lookup a guest VZ TLB mapping.
* @vcpu: KVM VCPU pointer.
* @gpa: Guest virtual address in a TLB mapped guest segment.
- * @gpa: Ponter to output guest physical address it maps to.
+ * @gpa: Pointer to output guest physical address it maps to.
*
* Converts a guest virtual address in a guest TLB mapped segment to a guest
* physical address, by probing the guest TLB.
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 4ca2c28878e0..5ab043000409 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -574,7 +574,7 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
dp++;
}

- /* Make last descrptor point to the first. */
+ /* Make last descriptor point to the first. */
dp--;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index b63ad5d42cc7..306cee07ce3f 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -318,7 +318,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
}

/*
- * Determine if this is an entry that can satisify the
+ * Determine if this is an entry that can satisfy the
* request Check to make sure entry is large enough to
* satisfy request.
*/
diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index ae8806e7bce2..15faca494c80 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -377,7 +377,7 @@ cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue,
/*
* Check to make sure all static priority
* queues are contiguous. Also catches some
- * cases of static priorites not starting at
+ * cases of static priorities not starting at
* queue 0.
*/
if (static_priority_end != -1
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 66cf0e041b6f..e55c87d51df6 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -1405,7 +1405,7 @@ static void octeon_irq_init_ciu2_percpu(void)
* completed.
*
* There are 9 registers and 3 IPX levels with strides 0x1000
- * and 0x200 respectivly. Use loops to clear them.
+ * and 0x200 respectively. Use loops to clear them.
*/
for (regx = 0; regx <= 0x8000; regx += 0x1000) {
for (ipx = 0; ipx <= 0x400; ipx += 0x200)
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 4df919d26b08..5cffe1ed2447 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -419,7 +419,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
/* Step 5c: Enable SuperSpeed. */
uctl_ctl.s.ref_ssp_en = 1;

- /* Step 5d: Cofngiure PHYs. SKIP */
+ /* Step 5d: Configure PHYs. SKIP */

/* Step 6a & 6b: Power up PHYs. */
uctl_ctl.s.hs_power_en = 1;
diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c
index ef5fc1ca1b5d..66188739f54d 100644
--- a/arch/mips/fw/arc/memory.c
+++ b/arch/mips/fw/arc/memory.c
@@ -32,7 +32,7 @@ static phys_addr_t prom_mem_size[MAX_PROM_MEM] __initdata;
static unsigned int nr_prom_mem __initdata;

/*
- * For ARC firmware memory functions the unit of meassuring memory is always
+ * For ARC firmware memory functions the unit of measuring memory is always
* a 4k page of memory
*/
#define ARC_PAGE_SHIFT 12
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index 495ba7cc56ec..264d453876aa 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -141,7 +141,7 @@ void __init plat_time_init(void)
/*
* Set clock to 100Hz.
*
- * The R4030 timer receives an input clock of 1kHz which is divieded by
+ * The R4030 timer receives an input clock of 1kHz which is divided by
* a programmable 4-bit divider. This makes it fairly inflexible.
*/
r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9);
diff --git a/arch/mips/kernel/cmpxchg.c b/arch/mips/kernel/cmpxchg.c
index ac9c8cfb2ba9..e974a4954df8 100644
--- a/arch/mips/kernel/cmpxchg.c
+++ b/arch/mips/kernel/cmpxchg.c
@@ -22,7 +22,7 @@ unsigned long __xchg_small(volatile void *ptr, unsigned long val, unsigned int s

/*
* Calculate a shift & mask that correspond to the value we wish to
- * exchange within the naturally aligned 4 byte integerthat includes
+ * exchange within the naturally aligned 4 byte integer that includes
* it.
*/
shift = (unsigned long)ptr & 0x3;
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index f0ea92937546..d510f628ee03 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -156,7 +156,7 @@ static inline void check_errata(void)
/*
* Erratum "RPS May Cause Incorrect Instruction Execution"
* This code only handles VPE0, any SMP/RTOS code
- * making use of VPE1 will be responsable for that VPE.
+ * making use of VPE1 will be responsible for that VPE.
*/
if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 146d9fa77f75..53adcc1b2ed5 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -228,7 +228,7 @@ void __init check_wait(void)
break;

/*
- * Another rev is incremeting c0_count at a reduced clock
+ * Another rev is incrementing c0_count at a reduced clock
* rate while in WAIT mode. So we basically have the choice
* between using the cp0 timer as clocksource or avoiding
* the WAIT instruction. Until more details are known,
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index d919a0d813a1..50a3394a9d25 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -1345,7 +1345,7 @@ static int __cvmx_pcie_rc_initialize_gen2(int pcie_port)
mem_access_subid.s.esw = 1; /* Endian-swap for Writes. */
mem_access_subid.s.wtype = 0; /* "No snoop" and "Relaxed ordering" are not set */
mem_access_subid.s.rtype = 0; /* "No snoop" and "Relaxed ordering" are not set */
- /* PCIe Adddress Bits <63:34>. */
+ /* PCIe Address Bits <63:34>. */
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
mem_access_subid.cn68xx.ba = 0;
else
diff --git a/arch/mips/pic32/pic32mzda/config.c b/arch/mips/pic32/pic32mzda/config.c
index 36afe1b5b9c7..f69532007717 100644
--- a/arch/mips/pic32/pic32mzda/config.c
+++ b/arch/mips/pic32/pic32mzda/config.c
@@ -111,7 +111,7 @@ void __init pic32_config_init(void)
pic32_reset_status = readl(pic32_conf_base + PIC32_RCON);
writel(-1, PIC32_CLR(pic32_conf_base + PIC32_RCON));

- /* Device Inforation */
+ /* Device Information */
pr_info("Device Id: 0x%08x, Device Ver: 0x%04x\n",
pic32_get_device_id(),
pic32_get_device_version());
diff --git a/arch/mips/tools/loongson3-llsc-check.c b/arch/mips/tools/loongson3-llsc-check.c
index bdbc7b4324ec..5f68a4fa8a7e 100644
--- a/arch/mips/tools/loongson3-llsc-check.c
+++ b/arch/mips/tools/loongson3-llsc-check.c
@@ -217,7 +217,7 @@ static int check_code(uint64_t pc, uint32_t *code, size_t sz)
)

/*
- * Skip the first instructionm allowing check_ll to look backwards
+ * Skip the first instruction, allowing check_ll to look backwards
* unconditionally.
*/
advance();
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index fb998726bd5d..e98845543b77 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -225,7 +225,7 @@ txx9_alloc_pci_controller(struct pci_controller *pcic,
static int __init
txx9_arch_pci_init(void)
{
- PCIBIOS_MIN_IO = 0x8000; /* reseve legacy I/O space */
+ PCIBIOS_MIN_IO = 0x8000; /* reserve legacy I/O space */
return 0;
}
arch_initcall(txx9_arch_pci_init);
diff --git a/arch/mips/net/bpf_jit_comp32.c b/arch/mips/net/bpf_jit_comp32.c
index 044b11b65bca..83c975d5cca2 100644
--- a/arch/mips/net/bpf_jit_comp32.c
+++ b/arch/mips/net/bpf_jit_comp32.c
@@ -722,7 +722,7 @@ static void emit_atomic_r32(struct jit_context *ctx,
0, JIT_RESERVED_STACK);
/*
* Argument 1: dst+off if xchg, otherwise src, passed in register a0
- * Argument 2: src if xchg, othersize dst+off, passed in register a1
+ * Argument 2: src if xchg, otherwise dst+off, passed in register a1
*/
emit(ctx, move, MIPS_R_T9, dst);
if (code == BPF_XCHG) {
diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c
index 130eb67bd3c9..971f7b46759b 100644
--- a/arch/mips/dec/ioasic-irq.c
+++ b/arch/mips/dec/ioasic-irq.c
@@ -68,13 +68,13 @@ static struct irq_chip ioasic_dma_irq_type = {
* I/O ASIC implements two kinds of DMA interrupts, informational and
* error interrupts.
*
- * The formers do not stop DMA and should be cleared as soon as possible
+ * The former do not stop DMA and should be cleared as soon as possible
* so that if they retrigger before the handler has completed, usually as
* a side effect of actions taken by the handler, then they are reissued.
* These use the `handle_edge_irq' handler that clears the request right
* away.
*
- * The latters stop DMA and do not resume it until the interrupt has been
+ * The latter stop DMA and do not resume it until the interrupt has been
* cleared. This cannot be done until after a corrective action has been
* taken and this also means they will not retrigger. Therefore they use
* the `handle_fasteoi_irq' handler that only clears the request on the
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 82b00e45ce50..6c3704f51d0d 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -71,7 +71,7 @@ volatile u32 *ioasic_base;
EXPORT_SYMBOL(ioasic_base);

/*
- * IRQ routing and priority tables. Priorites are set as follows:
+ * IRQ routing and priority tables. Priorities are set as follows:
*
* KN01 KN230 KN02 KN02-BA KN02-CA KN03
*