Re: [PATCH v4 0/4] mainline Protonic PRTT1x boards

[Alexandre TORGUE]

Hi Oleksij

On 4/26/22 09:35, Oleksij Rempel wrote:
> changes v4:
> - reorder prtt1X compatible again
> - remove spaces in stm32mp151a-prtt1c.dts
>
> changes v3:
> - add silabs,wfx compatible
> - move spi pin configuration to stm32mp15-pinctrl.dtsi
> - move prtt1X compatible in alphabetical order
> - add watchdog and thermal nodes
>
> changes v2:
> - cleanup mmc nodes
> - disabled dma for uart4 (this is console interface and it should work
>    as simple as possible)
>
> Oleksij Rempel (4):
>    dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
>      boards
>    dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
>    ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
>    ARM: dts: stm32: add support for Protonic PRTT1x boards
>
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   8 +
>   .../staging/net/wireless/silabs,wfx.yaml      |   1 +
>   arch/arm/boot/dts/Makefile                    |   3 +
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  15 +
>   arch/arm/boot/dts/stm32mp151a-prtt1a.dts      |  52 +++
>   arch/arm/boot/dts/stm32mp151a-prtt1c.dts      | 304 ++++++++++++++++++
>   arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi     | 229 +++++++++++++
>   arch/arm/boot/dts/stm32mp151a-prtt1s.dts      |  63 ++++
>   8 files changed, 675 insertions(+)
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts

Series applied on stm32-next.

Regards
Alex