Re: [PATCH v2] arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk3568

[Peter Geis]

On Mon, May 2, 2022 at 2:46 AM Michael Riesch
<michael.riesch@xxxxxxxxxxxxxx> wrote:
>
> This USB 3.0 controller of the Rockchip RK3568 is capable of OTG/DRD
> operation. Enable it in the device tree.

I think I missed a conversation here, the xhci0 controller is the otg
port for both rk3566 and rk3568. The only difference is on rk3566 it
is a usb2 only controller, where on rk3568 it is also a usb3
controller. It was set to host only because my original phy patches
didn't support otg mode. Since then Samuel's series fixed that.

Your original patch was correct.

Always,
Peter

>
> Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
> ---
> v2:
>  - As pointed out by Nicolas, this is RK3568 specific. Moved change to
>    rk3568.dtsi.
>
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> index 5eafddf62edc..bbfe8f3d68b7 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -134,6 +134,7 @@ power-domain@RK3568_PD_PIPE {
>  };
>
>  &usb_host0_xhci {
> +       dr_mode = "otg";
>         phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
>         phy-names = "usb2-phy", "usb3-phy";
>  };
> --
> 2.30.2