Re: [PATCH] arm64: dts: intel: add device tree for n6000

[Rob Herring]

On Mon, May 2, 2022 at 11:58 AM <matthew.gerlach@xxxxxxxxxxxxxxx> wrote:
>
> From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
>
> Add a device tree for the n6000 instantiation of Agilex
> Hard Processor System (HPS).
>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/intel/Makefile            |  1 +
>  .../boot/dts/intel/socfpga_agilex_n6000.dts   | 77 +++++++++++++++++++
>  2 files changed, 78 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
>
> diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
> index 0b5477442263..1425853877cc 100644
> --- a/arch/arm64/boot/dts/intel/Makefile
> +++ b/arch/arm64/boot/dts/intel/Makefile
> @@ -1,5 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_socdk.dtb \
>                                 socfpga_agilex_socdk_nand.dtb \
> +                               socfpga_agilex_n6000.dtb \

Alphabetical order.

>                                 socfpga_n5x_socdk.dtb
>  dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
> diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
> new file mode 100644
> index 000000000000..07f5a5983e5c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
> @@ -0,0 +1,77 @@
> +// SPDX-License-Identifier:     GPL-2.0
> +/*
> + * Copyright (C) 2021-2022, Intel Corporation
> + */
> +#include "socfpga_agilex.dtsi"
> +
> +/ {
> +       model = "SoCFPGA Agilex n6000";
> +
> +       aliases {
> +               serial0 = &uart1;
> +               serial1 = &uart0;
> +               ethernet0 = &gmac0;
> +               ethernet1 = &gmac1;
> +               ethernet2 = &gmac2;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       memory {
> +               device_type = "memory";
> +               /* We expect the bootloader to fill in the reg */
> +               reg = <0 0 0 0>;
> +       };
> +
> +       soc {
> +               clocks {
> +                       osc1 {
> +                               clock-frequency = <25000000>;
> +                       };
> +               };
> +               agilex_hps_bridges: bridge@80000000 {
> +                       compatible = "simple-bus";
> +                       reg = <0x80000000 0x60000000>,
> +                               <0xf9000000 0x00100000>;
> +                       reg-names = "axi_h2f", "axi_h2f_lw";
> +                       #address-cells = <0x2>;
> +                       #size-cells = <0x1>;
> +                       ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
> +
> +                       uio_cp_eng@0xf9000000 {

Unit addresses shouldn't have '0x' and the address is wrong as it
should match the child address (0). dtc will tell you this though you
need 'W=1'. Run this and schema checks and don't add new warnings.

> +                               compatible = "generic-uio";

NAK. Not documented and that's because this is not a h/w device.

> +                               reg = <0x00000000 0x00000000 0x00001000>;
> +                               status = "okay";

That's the default.

> +                       };
> +               };
> +       };
> +};
> +
> +&uart0 {
> +       status = "okay";
> +};
> +
> +&uart1 {
> +       status = "okay";
> +};
> +
> +&spi0 {
> +       status = "okay";
> +
> +       spidev: spidev@0 {
> +               status = "okay";
> +               compatible = "linux,spidev";
> +               spi-max-frequency = <25000000>;
> +               reg = <0>;
> +       };
> +};
> +
> +&watchdog0 {
> +       status = "okay";
> +};
> +
> +&fpga_mgr {
> +       status = "disabled";
> +};
> --
> 2.25.1
>