[RFC PATCH v6 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Ansuel Smith]

Add LEDs definition example for qca8k using the offload trigger as the
default trigger and add all the supported offload triggers by the
switch.

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
 .../devicetree/bindings/net/dsa/qca8k.yaml    | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index f3c88371d76c..9b46ef645a2d 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -65,6 +65,8 @@ properties:
                  internal mdio access is used.
                  With the legacy mapping the reg corresponding to the internal
                  mdio is the switch reg with an offset of -1.
+                 Each phy have at least 3 LEDs connected and can be declared
+                 using the standard LEDs structure.
 
 patternProperties:
   "^(ethernet-)?ports$":
@@ -287,6 +289,24 @@ examples:
 
                 internal_phy_port1: ethernet-phy@0 {
                     reg = <0>;
+
+                    leds {
+                        led@0 {
+                            reg = <0>;
+                            color = <LED_COLOR_ID_WHITE>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            linux,default-trigger = "netdev";
+                        };
+
+                        led@1 {
+                            reg = <1>;
+                            color = <LED_COLOR_ID_AMBER>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            linux,default-trigger = "netdev";
+                        };
+                    };
                 };
 
                 internal_phy_port2: ethernet-phy@1 {
-- 
2.34.1