Re: [PATCH v3 8/8] riscv: dts: microchip: add the sundance polarberry

[Heiko Stuebner]

Am Sonntag, 1. Mai 2022, 21:25:59 CEST schrieb Conor Dooley:
> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> 
> Add a minimal device tree for the PolarFire SoC based Sundance
> PolarBerry.
> 
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

[...]

> diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts
> new file mode 100644
> index 000000000000..96ec589d1571
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts
> @@ -0,0 +1,95 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/* Copyright (c) 2020-2022 Microchip Technology Inc */
> +
> +/dts-v1/;
> +
> +#include "mpfs.dtsi"
> +#include "mpfs-polarberry-fabric.dtsi"
> +
> +/* Clock frequency (in Hz) of the rtcclk */
> +#define MTIMER_FREQ	1000000
> +
> +/ {
> +	model = "Sundance PolarBerry";
> +	compatible = "sundance,polarberry", "microchip,mpfs";
> +
> +	aliases {
> +		serial0 = &mmuart0;
> +		ethernet0 = &mac1;

I guess you could sort them alphabetically (ethernet above serial0)

> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	cpus {
> +		timebase-frequency = <MTIMER_FREQ>;
> +	};
> +
> +	ddrc_cache_lo: memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x80000000 0x0 0x2e000000>;
> +		status = "okay";

"okay" is implied I think, so when you only add the node
here, you probably don't need to specify the status.

> +	};
> +
> +	ddrc_cache_hi: memory@1000000000 {
> +		device_type = "memory";
> +		reg = <0x10 0x00000000 0x0 0xC0000000>;
> +		status = "okay";
> +	};
> +};
> +
> +&refclk {
> +	clock-frequency = <125000000>;
> +};
> +
> +&mmuart0 {
> +	status = "okay";
> +};
> +
> +&mmc {
> +	status = "okay";

having the status property last (below sd-uhssdr104) can be helpful
for readability, as readers would know where to expect it.

> +	bus-width = <4>;
> +	disable-wp;
> +	cap-sd-highspeed;
> +	cap-mmc-highspeed;
> +	card-detect-delay = <200>;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	sd-uhs-sdr12;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +};
> +
> +&mac1 {
> +	status = "okay";
> +	phy-mode = "sgmii";
> +	phy-handle = <&phy1>;
> +	phy1: ethernet-phy@5 {
> +		reg = <5>;
> +		ti,fifo-depth = <0x01>;
> +	};
> +	phy0: ethernet-phy@4 {
> +		reg = <4>;
> +		ti,fifo-depth = <0x01>;
> +	};
> +};
> +
> +&mac0 {
> +	status = "disabled";

mac0 is already disabled in the mpfs.dtsi, so you either don't
need to duplicate it here, or if it's a reminder of something,
I guess a comment for the "why" would be helpful.

> +	phy-mode = "sgmii";
> +	phy-handle = <&phy0>;
> +};
> +
> +&rtc {
> +	status = "okay";
> +};
> +
> +&mbox {
> +	status = "okay";
> +};
> +
> +&syscontroller {
> +	status = "okay";
> +};

My personal preference would be alphabetical sorting also for
phandles, so

&mac0 {}
&mac1 {}
&mbox {}
&refclk {}
&rtc {}

etc - makes finding things a lot easier in the long run
especially when files get longer.


Heiko