[PATCH v11 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards

[Srinivasa Rao Mandadapu]

Enable rx, tx and va macro codecs and soundwire nodes on revision 3,
4 (aka CRD 1.0 and 2.0) and IDP boards.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index fb0e313..f68eeb8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -246,6 +246,19 @@
 	modem-init;
 };
 
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+	vdd-micb-supply = <&vreg_bob>;
+};
+
 &pcie1 {
 	status = "okay";
 	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
@@ -306,6 +319,28 @@
 	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
 };
 
+&swr0 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		#sound-dai-cells = <1>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		#sound-dai-cells = <1>;
+		qcom,tx-port-mapping = <1 2 3 4>;
+	};
+};
+
 &uart5 {
 	compatible = "qcom,geni-debug-uart";
 	status = "okay";
-- 
2.7.4