Re: [PATCH 2/6] dt-bindings: regulator: Add reg-external-output binding

[Zev Weiss]

On Wed, May 04, 2022 at 05:55:53AM PDT, Mark Brown wrote:
> On Tue, May 03, 2022 at 11:52:48PM -0700, Zev Weiss wrote:
> > This describes an external output supplied by a regulator, such as a
> > power outlet on a power distribution unit (PDU).
>
> OK, so this is that represnetation of the connection - which raises the
> question about why the regulator needs a property?
>
> > +description: |
> > +  This describes an external output supplied by a regulator, such as
> > +  a power outlet on a power distribution unit (PDU).
> > +
> > +properties:
> > +  compatible:
> > +    const: reg-external-output
> > +
> > +  vout-supply:
> > +    description:
> > +      Phandle of the regulator supplying the output, which should have
> > +      the regulator-external-output property.
> > +
> > +required:
>
> I think at a minimum anything like this would need some sort of
> representation of how the output physically appears so that people can
> work out how outputs are mapped to the hardware they see.

I don't quite understand what you're describing here -- could you 
elaborate on what you mean by "how the output physically appears", and 
what that might look like in a DT binding?

> However we
> already have a subsystem for external connectors - extcon.  Perhaps this
> should be a regulator client in the extcon API?  It's common for
> connectors to include some sort of power provision so it seems like this
> would fit right in.

Interesting -- I wasn't previously aware of the extcon subsystem, thanks 
for the pointer.  However, after looking at it a bit, I'm not sure I see 
how it'd be applicable here, since it looks like it's built to handle 
hardware that's at least sophisticated enough for software to tell 
whether or not something's plugged in, which isn't the case here.  The 
connector is just a ground pin and +12VDC pin, no presence-detection 
mechanism or anything else.  Outside of the regulator itself there's 
really no "device" there for software to talk to or otherwise interact 
with at all.


Thanks,
Zev