Re: [PATCH v5 0/2] DSS: Add support for DisplayPort

[Aradhya Bhatia]

On 29/04/22 16:56, Rahul T R wrote:
> The following series of patches enables DisplayPort on
> j721e-evm
> 
> v2:
>    - use phandle with a parameter to refer clocks insted of
>      sub nodes in serdes_wiz node
>    - move phy link node to board DTS file
> 
> v3:
>    - Fix the regulator node name as per the DT spec
>    - Use Macro for GPIO type
> 
> v4:
>    - Move adding of phy link nodes from 2/2 to 1/2, to fix dtbs checks warnings
>    - Add leading zeros to align reg property addresses and sizes
>    - Add empty ports for mhdp node in dtsi file to fix dtbs checks warnings
> 
> v5:
>    - Fix a typo in regulator name
> 
> boot logs:
>    https://gist.githubusercontent.com/ravi-rahul/1bdbc3f77ab381e486c8394650c2e85d/raw/2327c9894c3236950a00f4511ae668ac4399b71e/j7_DP_upstream.log
> 
> kernel patch verify report:
>    https://gist.githubusercontent.com/ravi-rahul/a982fef3fae03ec0dbdd5cb475a4cb25/raw/9ef482f96fa351cff7980e4340e9bcb8471ec3ab/report-kernel-patch-verify.txt
> 
> Tomi Valkeinen (2):
>   arm64: dts: ti: k3-j721e-*: add DP & DP PHY
>   arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm
> 
>  .../dts/ti/k3-j721e-common-proc-board.dts     | 77 ++++++++++++++++++-
>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 75 +++++++++++++++++-
>  arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 16 ++++
>  3 files changed, 162 insertions(+), 6 deletions(-)
> 

Reviewed-by: Aradhya Bhatia <a-bhatia1@xxxxxx>