Re: [BUG] New arm scmi check in linux-next causing rk3568 not to boot due to firmware bug

[Sudeep Holla]

> > > > On Wed, May 04, 2022 at 02:49:07PM +0200, Nicolas Frattaroli wrote:
> > > > > Good day,
> > > > >
> > > > > a user on the #linux-rockchip channel on the Libera.chat IRC network
> > > > > reported that their RK3568 was no longer getting a CPU and GPU clock
> > > > > from scmi and consequently not booting when using linux-next. This
> > > > > was bisected down to the following commit:

OK I missed to read the above properly earlier. If scmi probe failure is
resulting in Linux boot failure, then that is another bug that needs fixing.
Why does not getting CPU clock block the boot. I would like to see the boot
logs. I considered this issue to be non-fatal and must be just ending up
disabling all SCMI communication. But the reported issue is boot failure
which sounds like another/different bug and I would like that to be fixed
first before we push the workaround for the reported issue so that it is
not ignored.

Has anyone analysed why the absence of CPU clock results in boot failure ?
Are you running the upstream kernel itself ?

-- 
Regards,
Sudeep