Re: [PATCH 1/4] dt-bindings: mmc/sdhci-msm: Convert bindings to yaml

From: Bhupesh Sharma
Date: Thu May 05 2022 - 16:29:48 EST

Next message: Nick Desaulniers: "Re: [PATCH v3 14/15] kbuild: make built-in.a rule robust against too long argument error"
Previous message: Krzysztof Kozlowski: "Re: [RFC v2] dt-bindings: net: dsa: convert binding for mediatek switches"
In reply to: Ulf Hansson: "Re: [PATCH 1/4] dt-bindings: mmc/sdhci-msm: Convert bindings to yaml"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Ulf and Rob,

On Thu, 5 May 2022 at 14:00, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
>
> On Wed, 4 May 2022 at 22:46, Rob Herring <robh@xxxxxxxxxx> wrote:
> >
> > On Sat, Apr 30, 2022 at 03:38:30AM +0530, Bhupesh Sharma wrote:
> > > Convert Qualcomm sdhci-msm devicetree binding to YAML.
> > >
> > > Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> > > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > > Cc: Rob Herring <robh@xxxxxxxxxx>
> > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > > ---
> > > .../devicetree/bindings/mmc/sdhci-msm.txt | 123 -----------
> > > .../devicetree/bindings/mmc/sdhci-msm.yaml | 192 ++++++++++++++++++
> > > 2 files changed, 192 insertions(+), 123 deletions(-)
> > > delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> > > create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> > > deleted file mode 100644
> > > index 6216ed777343..000000000000
> > > --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> > > +++ /dev/null
> > > @@ -1,123 +0,0 @@
> > > -* Qualcomm SDHCI controller (sdhci-msm)
> > > -
> > > -This file documents differences between the core properties in mmc.txt
> > > -and the properties used by the sdhci-msm driver.
> > > -
> > > -Required properties:
> > > -- compatible: Should contain a SoC-specific string and a IP version string:
> > > - version strings:
> > > - "qcom,sdhci-msm-v4" for sdcc versions less than 5.0
> > > - "qcom,sdhci-msm-v5" for sdcc version 5.0
> > > - For SDCC version 5.0.0, MCI registers are removed from SDCC
> > > - interface and some registers are moved to HC. New compatible
> > > - string is added to support this change - "qcom,sdhci-msm-v5".
> > > - full compatible strings with SoC and version:
> > > - "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"
> > > - "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"
> > > - "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"
> > > - "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
> > > - "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
> > > - "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
> > > - "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"
> > > - "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
> > > - "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
> > > - "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
> > > - "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > - "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
> > > - "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
> > > - "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"
> > > - NOTE that some old device tree files may be floating around that only
> > > - have the string "qcom,sdhci-msm-v4" without the SoC compatible string
> > > - but doing that should be considered a deprecated practice.
> > > -
> > > -- reg: Base address and length of the register in the following order:
> > > - - Host controller register map (required)
> > > - - SD Core register map (required for controllers earlier than msm-v5)
> > > - - CQE register map (Optional, CQE support is present on SDHC instance meant
> > > - for eMMC and version v4.2 and above)
> > > - - Inline Crypto Engine register map (optional)
> > > -- reg-names: When CQE register map is supplied, below reg-names are required
> > > - - "hc" for Host controller register map
> > > - - "core" for SD core register map
> > > - - "cqhci" for CQE register map
> > > - - "ice" for Inline Crypto Engine register map (optional)
> > > -- interrupts: Should contain an interrupt-specifiers for the interrupts:
> > > - - Host controller interrupt (required)
> > > -- pinctrl-names: Should contain only one value - "default".
> > > -- pinctrl-0: Should specify pin control groups used for this controller.
> > > -- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
> > > -- clock-names: Should contain the following:
> > > - "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
> > > - "core" - SDC MMC clock (MCLK) (required)
> > > - "bus" - SDCC bus voter clock (optional)
> > > - "xo" - TCXO clock (optional)
> > > - "cal" - reference clock for RCLK delay calibration (optional)
> > > - "sleep" - sleep clock for RCLK delay calibration (optional)
> > > - "ice" - clock for Inline Crypto Engine (optional)
> > > -
> > > -- qcom,ddr-config: Certain chipsets and platforms require particular settings
> > > - for the DDR_CONFIG register. Use this field to specify the register
> > > - value as per the Hardware Programming Guide.
> > > -
> > > -- qcom,dll-config: Chipset and Platform specific value. Use this field to
> > > - specify the DLL_CONFIG register value as per Hardware Programming Guide.
> > > -
> > > -Optional Properties:
> > > -* Following bus parameters are required for interconnect bandwidth scaling:
> > > -- interconnects: Pairs of phandles and interconnect provider specifier
> > > - to denote the edge source and destination ports of
> > > - the interconnect path.
> > > -
> > > -- interconnect-names: For sdhc, we have two main paths.
> > > - 1. Data path : sdhc to ddr
> > > - 2. Config path : cpu to sdhc
> > > - For Data interconnect path the name supposed to be
> > > - is "sdhc-ddr" and for config interconnect path it is
> > > - "cpu-sdhc".
> > > - Please refer to Documentation/devicetree/bindings/
> > > - interconnect/ for more details.
> > > -
> > > -Example:
> > > -
> > > - sdhc_1: sdhci@f9824900 {
> > > - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
> > > - reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
> > > - interrupts = <0 123 0>;
> > > - bus-width = <8>;
> > > - non-removable;
> > > -
> > > - vmmc-supply = <&pm8941_l20>;
> > > - vqmmc-supply = <&pm8941_s3>;
> > > -
> > > - pinctrl-names = "default";
> > > - pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
> > > -
> > > - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
> > > - clock-names = "core", "iface";
> > > - interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>,
> > > - <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>;
> > > - interconnect-names = "sdhc-ddr","cpu-sdhc";
> > > -
> > > - qcom,dll-config = <0x000f642c>;
> > > - qcom,ddr-config = <0x80040868>;
> > > - };
> > > -
> > > - sdhc_2: sdhci@f98a4900 {
> > > - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
> > > - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
> > > - interrupts = <0 125 0>;
> > > - bus-width = <4>;
> > > - cd-gpios = <&msmgpio 62 0x1>;
> > > -
> > > - vmmc-supply = <&pm8941_l21>;
> > > - vqmmc-supply = <&pm8941_l13>;
> > > -
> > > - pinctrl-names = "default";
> > > - pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
> > > -
> > > - clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
> > > - clock-names = "core", "iface";
> > > -
> > > - qcom,dll-config = <0x0007642c>;
> > > - qcom,ddr-config = <0x80040868>;
> > > - };
> > > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> > > new file mode 100644
> > > index 000000000000..c33f173e3b6c
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> > > @@ -0,0 +1,192 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +
> > > +%YAML 1.2
> > > +---
> > > +$id: "http://devicetree.org/schemas/mmc/sdhci-msm.yaml#";
> > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> > > +
> > > +title: Qualcomm SDHCI controller (sdhci-msm)
> > > +
> > > +maintainers:
> > > + - Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > > +
> > > +description:
> > > + Secure Digital Host Controller Interface (SDHCI) present on
> > > + Qualcomm SOCs supports SD/MMC/SDIO devices.
> > > +
> > > +properties:
> > > + compatible:
> > > + oneOf:
> > > + - items:
> > > + - enum:
> > > + - qcom,apq8084-sdhci
> > > + - qcom,msm8226-sdhci
> > > + - qcom,msm8953-sdhci
> > > + - qcom,msm8974-sdhci
> > > + - qcom,msm8916-sdhci
> > > + - qcom,msm8992-sdhci
> > > + - qcom,msm8994-sdhci
> > > + - qcom,msm8996-sdhci
> > > + - qcom,qcs404-sdhci
> > > + - qcom,sc7180-sdhci
> > > + - qcom,sc7280-sdhci
> > > + - qcom,sdm630-sdhci
> > > + - qcom,sdm845-sdhci
> > > + - qcom,sdx55-sdhci
> > > + - qcom,sm6125-sdhci
> > > + - qcom,sm6350-sdhci
> > > + - qcom,sm8250-sdhci
> > > + - enum:
> > > + - qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
> > > + - qcom,sdhci-msm-v5 # for sdcc version 5.0
> >
> > This should be split up between v4 and v5.
> >
> > > + - items:
> > > + - const: qcom,sdhci-msm-v4 # Deprecated (only for backward compatibility)
> > > + # for sdcc versions less than 5.0
> >
> > deprecated: true
> >
> > > +
> > > + reg:
> > > + minItems: 1
> > > + items:
> > > + - description: Host controller register map
> > > + - description: SD Core register map
> > > + - description: CQE register map
> > > + - description: Inline Crypto Engine register map
> > > +
> > > + clocks:
> > > + minItems: 3
> > > + items:
> > > + - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock
> > > + - description: SDC MMC clock, MCLK
> > > + - description: TCXO clock
> > > + - description: clock for Inline Crypto Engine
> > > + - description: SDCC bus voter clock
> > > + - description: reference clock for RCLK delay calibration
> > > + - description: sleep clock for RCLK delay calibration
> > > +
> > > + clock-names:
> > > + minItems: 2
> > > + items:
> > > + - const: iface
> > > + - const: core
> > > + - const: xo
> > > + - const: ice
> > > + - const: bus
> > > + - const: cal
> > > + - const: sleep
> > > +
> > > + interrupts:
> > > + maxItems: 2
> > > +
> > > + interrupt-names:
> > > + items:
> > > + - const: hc_irq
> > > + - const: pwr_irq
> > > +
> > > + pinctrl-names:
> > > + minItems: 1
> > > + items:
> > > + - const: default
> > > + - const: sleep
> > > +
> > > + pinctrl-0:
> > > + description:
> > > + Should specify pin control groups used for this controller.
> > > +
> > > + qcom,ddr-config:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + description: platform specific settings for DDR_CONFIG reg.
> > > +
> > > + qcom,dll-config:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + description: platform specific settings for DLL_CONFIG reg.
> > > +
> > > + iommus:
> > > + minItems: 1
> > > + maxItems: 8
> > > + description: |
> > > + phandle to apps_smmu node with sid mask.
> > > +
> > > + interconnects:
> > > + items:
> > > + - description: data path, sdhc to ddr
> > > + - description: config path, cpu to sdhc
> > > +
> > > + interconnect-names:
> > > + items:
> > > + - const: sdhc-ddr
> > > + - const: cpu-sdhc
> > > +
> > > + power-domains:
> > > + description: A phandle to sdhci power domain node
> > > + maxItems: 1
> > > +
> > > +patternProperties:
> > > + '^opp-table(-[a-z0-9]+)?$':
> > > + if:
> > > + properties:
> > > + compatible:
> > > + const: operating-points-v2
> > > + then:
> > > + patternProperties:
> > > + '^opp-?[0-9]+$':
> > > + required:
> > > + - required-opps
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - clocks
> > > + - clock-names
> > > + - interrupts
> > > +
> > > +additionalProperties: true
> >
> > Not valid except for common (incomplete) schemas. Instead you need:
> >
> > allOf:
> > - $ref: mmc-controller.yaml#
> >
> > unevaluatedProperties: false
> >
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > + #include <dt-bindings/clock/qcom,gcc-sm8250.h>
> > > + #include <dt-bindings/clock/qcom,rpmh.h>
> > > + #include <dt-bindings/power/qcom-rpmpd.h>
> > > +
> > > + sdhc_2: sdhci@8804000 {
> >
> > This will be an error then.
> >
> > > + compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
> > > + reg = <0 0x08804000 0 0x1000>;
>
>
> [...]
>
> Bhupesh, I realized that I was a little too quick to apply @subject
> patch. Although, rather than dropping it from my branch, can you
> please address Rob's comments and send an incremental patch on top?

Sure, no problem. I am preparing the incremental patch and will share
it shortly.

Thanks,
Bhupesh

Next message: Nick Desaulniers: "Re: [PATCH v3 14/15] kbuild: make built-in.a rule robust against too long argument error"
Previous message: Krzysztof Kozlowski: "Re: [RFC v2] dt-bindings: net: dsa: convert binding for mediatek switches"
In reply to: Ulf Hansson: "Re: [PATCH 1/4] dt-bindings: mmc/sdhci-msm: Convert bindings to yaml"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]