Re: (subset) [PATCH v2] arm64: dts: qcom: sc7280: eDP for herobrine boards

[Bjorn Andersson]

On Tue, 26 Apr 2022 12:41:03 -0700, Douglas Anderson wrote:
> Add eDP support to herobrine boards, splitting up amongst the
> different files as makes sense. Rationale for the current split of
> things:
> * The eDP connector itself is on qcard. However, not all devices with
>   a qcard will use an eDP panel. Some might use MIPI and, presumably,
>   someone could build a device with qcard that had no display at all.
> * The qcard provides a PWM for backlight that goes to the eDP
>   connector. This PWM is also provided to the board and it's expected
>   that it would be used as the backlight PWM even for herobrine
>   devices with MIPI displays.
> * It's currently assumed that all herobrine boards will have some sort
>   of display, either MIPI or eDP (but not both).
> * We will assume herobrine-rev1 has eDP. The schematics allow for a
>   MIPI panel to be hooked up but, aside from some testing, nobody is
>   doing this and most boards don't have all the parts stuffed for
>   it. The two panels would also share a PWM for backlight, which is
>   weird.
> * herobrine-villager and herobrine-hoglin (crd) also have eDP.
> * herobrine-hoglin (crd) has slightly different regulator setup for
>   the backlight. It's expected that this is unique to this board. See
>   comments in the dts file.
> * There are some regulators that are defined in the qcard schematic
>   but provided by the board like "vreg_edp_bl" and
>   "vreg_edp_3p3". While we could put references to these regulators
>   straight in the qcard.dtsi file, this would force someone using
>   qcard that didn't provide those regulators to provide a dummy or do
>   an ugly /delete-node/. Instead, we'll add references in
>   herobrine.dtsi.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: sc7280: eDP for herobrine boards
      commit: 366a0a194b3b3e3e52bc7b7b1ac35b40a1187902

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>