Re: [mm/page_alloc] f26b3fa046: netperf.Throughput_Mbps -18.0% regression

[ying.huang@xxxxxxxxx]

On Fri, 2022-05-06 at 20:17 +0800, Aaron Lu wrote:
> On Fri, May 06, 2022 at 04:40:45PM +0800, ying.huang@xxxxxxxxx wrote:
> > On Fri, 2022-04-29 at 19:29 +0800, Aaron Lu wrote:
> > > Hi Mel,
> > > 
> > > On Wed, Apr 20, 2022 at 09:35:26AM +0800, kernel test robot wrote:
> > > > 
> > > > (please be noted we reported
> > > > "[mm/page_alloc]  39907a939a:  netperf.Throughput_Mbps -18.1% regression"
> > > > on
> > > > https://lore.kernel.org/all/20220228155733.GF1643@xsang-OptiPlex-9020/
> > > > while the commit is on branch.
> > > > now we still observe similar regression when it's on mainline, and we also
> > > > observe a 13.2% improvement on another netperf subtest.
> > > > so report again for information)
> > > > 
> > > > Greeting,
> > > > 
> > > > FYI, we noticed a -18.0% regression of netperf.Throughput_Mbps due to commit:
> > > > 
> > > > 
> > > > commit: f26b3fa046116a7dedcaafe30083402113941451 ("mm/page_alloc: limit number of high-order pages on PCP during bulk free")
> > > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git master
> > > > 
> > > 
> > > So what this commit did is: if a CPU is always doing free(pcp->free_factor > 0)
> > 
> > IMHO, this means the consumer and producer are running on different
> > CPUs.
> > 
> 
> Right.
> 
> > > and if the being freed high-order page's order is <= PAGE_ALLOC_COSTLY_ORDER,
> > > then do not use PCP but directly free the page directly to buddy.
> > > 
> > > The rationale as explained in the commit's changelog is:
> > > "
> > > Netperf running on localhost exhibits this pattern and while it does not
> > > matter for some machines, it does matter for others with smaller caches
> > > where cache misses cause problems due to reduced page reuse. Pages
> > > freed directly to the buddy list may be reused quickly while still cache
> > > hot where as storing on the PCP lists may be cold by the time
> > > free_pcppages_bulk() is called.
> > > "
> > > 
> > > This regression occurred on a machine that has large caches so this
> > > optimization brings no value to it but only overhead(skipped PCP), I
> > > guess this is the reason why there is a regression.
> > 
> > Per my understanding, not only the cache size is larger, but also the L2
> > cache (1MB) is per-core on this machine.  So if the consumer and
> > producer are running on different cores, the cache-hot page may cause
> > more core-to-core cache transfer.  This may hurt performance too.
> > 
> 
> Client side allocates skb(page) and server side recvfrom() it.
> recvfrom() copies the page data to server's own buffer and then releases
> the page associated with the skb. Client does all the allocation and
> server does all the free, page reuse happens at client side.
> So I think core-2-core cache transfer due to page reuse can occur when
> client task migrates.

The core-to-core cache transfering can be cross-socket or cross-L2 in
one socket.  I mean the later one.

> I have modified the job to have the client and server bound to a
> specific CPU of different cores on the same node, and testing it on the
> same Icelake 2 sockets server, the result is
> 
>   kernel      throughput
> 8b10b465d0e1     125168
> f26b3fa04611     102039 -18%
> 
> It's also a 18% drop. I think this means c2c is not a factor?

Can you test with client and server bound to 2 hardware threads
(hyperthread) of one core?  The two hardware threads of one core will
share the L2 cache.

> > > I have also tested this case on a small machine: a skylake desktop and
> > > this commit shows improvement:
> > > 8b10b465d0e1: "netperf.Throughput_Mbps": 72288.76,
> > > f26b3fa04611: "netperf.Throughput_Mbps": 90784.4,  +25.6%
> > > 
> > > So this means those directly freed pages get reused by allocator side
> > > and that brings performance improvement for machines with smaller cache.
> > 
> > Per my understanding, the L2 cache on this desktop machine is shared
> > among cores.
> > 
> 
> The said CPU is i7-6700 and according to this wikipedia page,
> L2 is per core:
> https://en.wikipedia.org/wiki/Skylake_(microarchitecture)#Mainstream_desktop_processors

Sorry, my memory was wrong.  The skylake and later server has much
larger private L2 cache (1MB vs 256KB of client), this may increase the
possibility of core-2-core transfering.

> > > I wonder if we should still use PCP a little bit under the above said
> > > condition, for the purpose of:
> > > 1 reduced overhead in the free path for machines with large cache;
> > > 2 still keeps the benefit of reused pages for machines with smaller cache.
> > > 
> > > For this reason, I tested increasing nr_pcp_high() from returning 0 to
> > > either returning pcp->batch or (pcp->batch << 2):
> > > machine\nr_pcp_high() ret: pcp->high   0   pcp->batch (pcp->batch << 2)
> > > skylake desktop:             72288   90784   92219       91528
> > > icelake 2sockets:           120956   99177   98251      116108
> > > 
> > > note nr_pcp_high() returns pcp->high is the behaviour of this commit's
> > > parent, returns 0 is the behaviour of this commit.
> > > 
> > > The result shows, if we effectively use a PCP high as (pcp->batch << 2)
> > > for the described condition, then this workload's performance on
> > > small machine can remain while the regression on large machines can be
> > > greately reduced(from -18% to -4%).
> > > 
> > 
> > Can we use cache size and topology information directly?
> 
> It can be complicated by the fact that the system can have multiple
> producers(cpus that are doing free) running at the same time and getting
> the perfect number can be a difficult job.

We can discuss this after verifying whether it's core-2-core transfering
related.

Best Regards,
Huang, Ying