[PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node

From: Corentin Labbe
Date: Mon May 09 2022 - 03:53:02 EST

Next message: Corentin Labbe: "[PATCH 3/6] dt-bindings: net: Add documentation for phy-supply"
Previous message: Corentin Labbe: "[PATCH 0/6] arm64: add ethernet to orange pi 3"
In reply to: Corentin Labbe: "[PATCH 1/6] phy: handle optional regulator for PHY"
Next in thread: Andre Przywara: "Re: [PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Now that PHY core can handle regulators, move regulator handle in PHY
node.

Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
---
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 2 +-
arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 2 +-
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 2 +-
arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts | 2 +-
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 2 +-
arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 2 +-
arch/arm/boot/dts/sun8i-h3-zeropi.dts | 2 +-
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 2 +-
arch/arm/boot/dts/sun8i-r40-oka40i-c.dts | 2 +-
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +-
arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 2 +-
13 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 5a7e1bd5f825..b450be0a45ed 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -129,7 +129,6 @@ &ehci0 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_sw>;
phy-handle = <&rgmii_phy>;
phy-mode = "rgmii-id";
allwinner,rx-delay-ps = <700>;
@@ -151,6 +150,7 @@ &mdio {
rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ phy-supply = <&reg_sw>;
};
};

diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index 870993393fc2..fe70b350cdbb 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -181,7 +181,6 @@ &ehci1 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_dldo4>;
phy-handle = <&rgmii_phy>;
phy-mode = "rgmii-id";
status = "okay";
@@ -201,6 +200,7 @@ &mdio {
rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ phy-supply = <&reg_dldo4>;
};
};

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index a2f2ef2b0092..c393612f44c6 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -103,7 +103,6 @@ &ehci2 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";

@@ -114,6 +113,7 @@ &external_mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
+ phy-supply = <&reg_gmac_3v3>;
};
};

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
index 26e2e6172e0d..70bde396856b 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
@@ -80,7 +80,6 @@ &ehci2 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii-id";
status = "okay";
@@ -90,6 +89,7 @@ &external_mdio {
ext_rgmii_phy: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
+ phy-supply = <&reg_gmac_3v3>;
};
};

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index d05fa679dcd3..c6dcf1af3298 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -83,7 +83,6 @@ &ehci3 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii-id";

@@ -94,6 +93,7 @@ &external_mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ phy-supply = <&reg_gmac_3v3>;
};
};

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index b6ca45d18e51..61eb8c003186 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -65,7 +65,6 @@ reg_gmac_3v3: gmac-3v3 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii-id";
status = "okay";
@@ -75,5 +74,6 @@ &external_mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ phy-supply = <&reg_gmac_3v3>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
index 7d3e7323b661..54174ef18823 100644
--- a/arch/arm/boot/dts/sun8i-h3-zeropi.dts
+++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
@@ -65,13 +65,13 @@ &external_mdio {
ext_rgmii_phy: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
+ phy-supply = <&reg_gmac_3v3>;
};
};

&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii-id";

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index a6a1087a0c9b..b1f269bbd479 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -130,7 +130,6 @@ &gmac {
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
- phy-supply = <&reg_dc1sw>;
status = "okay";
};

@@ -138,6 +137,7 @@ &gmac_mdio {
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ phy-supply = <&reg_dc1sw>;
};
};

diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
index 0bd1336206b8..c43476b426df 100644
--- a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
+++ b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
@@ -93,7 +93,6 @@ &gmac {
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
- phy-supply = <&reg_dcdc1>;
status = "okay";
};

@@ -101,6 +100,7 @@ &gmac_mdio {
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ phy-supply = <&reg_dcdc1>;
};
};

diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 47954551f573..050a649d7bda 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -121,7 +121,6 @@ &gmac {
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
- phy-supply = <&reg_dc1sw>;
status = "okay";
};

@@ -129,6 +128,7 @@ &gmac_mdio {
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ phy-supply = <&reg_dc1sw>;
};
};

diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index c8ca8cb7f5c9..ab9bf4bf7343 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -130,7 +130,6 @@ &gmac {
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
- phy-supply = <&reg_cldo1>;
status = "okay";
};

@@ -142,6 +141,7 @@ &i2c3 {

&mdio {
phy1: ethernet-phy@1 {
+ phy-supply = <&reg_cldo1>;
reg = <1>;
};
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 5c3580d712e4..48219b8049b1 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -125,13 +125,13 @@ &gmac {
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
- phy-supply = <&reg_cldo1>;
status = "okay";
};

&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
+ phy-supply = <&reg_cldo1>;
};
};

diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index d03f5853ef7b..65f0a3c2af3f 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -125,7 +125,6 @@ &ehci2 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii-id";

@@ -136,6 +135,7 @@ &external_mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ phy-supply = <&reg_gmac_3v3>;
};
};

--
2.35.1

Next message: Corentin Labbe: "[PATCH 3/6] dt-bindings: net: Add documentation for phy-supply"
Previous message: Corentin Labbe: "[PATCH 0/6] arm64: add ethernet to orange pi 3"
In reply to: Corentin Labbe: "[PATCH 1/6] phy: handle optional regulator for PHY"
Next in thread: Andre Przywara: "Re: [PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]