[PATCH v2] x86/tsc: Add option to force frequency recalibration with HW timer
From: Feng Tang
Date: Mon May 09 2022 - 10:41:17 EST
The kernel assumes that the TSC frequency which is provided by the
hardware / firmware via MSRs or CPUID(0x15) is correct after applying
a few basic consistency checks. This disables the TSC recalibration
against HPET or PM timer.
As a result there is no mechanism to validate that frequency in cases
where a firmware or hardware defect is suspected.
Add an option 'recalibrate' for 'tsc' kernel parameter to force the
tsc freq recalibration with HPET or PM timer, and warn if the deviation
from previous value is more than about 500 PPM. There is no functional
change to existing work flow.
Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
---
Changelog:
since v1:
* refine commit log to state clearly the problem and intention
of the patch with Thomas' words
.../admin-guide/kernel-parameters.txt | 4 +++
arch/x86/kernel/tsc.c | 34 ++++++++++++++++---
2 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 3f1cc5e317ed..35f35e287346 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5981,6 +5981,10 @@
in situations with strict latency requirements (where
interruptions from clocksource watchdog are not
acceptable).
+ [x86] recalibrate: force to do frequency recalibration
+ with a HW timer (HPET or PM timer), which provides a way
+ to validate the frequency info provided by HW or FW
+ through MSR or CPUID(0x15).
tsc_early_khz= [X86] Skip early TSC calibration and use the given
value instead. Useful when the early TSC frequency discovery
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index cafacb2e58cc..5cf62a58754a 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -48,6 +48,8 @@ static DEFINE_STATIC_KEY_FALSE(__use_tsc);
int tsc_clocksource_reliable;
+static int __read_mostly tsc_force_recalibrate;
+
static u32 art_to_tsc_numerator;
static u32 art_to_tsc_denominator;
static u64 art_to_tsc_offset;
@@ -303,6 +305,8 @@ static int __init tsc_setup(char *str)
mark_tsc_unstable("boot parameter");
if (!strcmp(str, "nowatchdog"))
no_tsc_watchdog = 1;
+ if (!strcmp(str, "recalibrate"))
+ tsc_force_recalibrate = 1;
return 1;
}
@@ -1374,6 +1378,25 @@ static void tsc_refine_calibration_work(struct work_struct *work)
else
freq = calc_pmtimer_ref(delta, ref_start, ref_stop);
+ /* Will hit this only if tsc_force_recalibrate has been set */
+ if (boot_cpu_has(X86_FEATURE_TSC_KNOWN_FREQ)) {
+
+ /* Warn if the deviation exceeds 500 ppm */
+ if (abs(tsc_khz - freq) > (tsc_khz >> 11)) {
+ pr_warn("Warning: TSC freq calibrated by CPUID/MSR differs from what is calibrated by HW timer, please check with vendor!!\n");
+ pr_info("Previous calibrated TSC freq:\t %lu.%03lu MHz\n",
+ (unsigned long)tsc_khz / 1000,
+ (unsigned long)tsc_khz % 1000);
+ }
+
+ pr_info("TSC freq recalibrated by [%s]:\t %lu.%03lu MHz\n",
+ hpet ? "HPET" : "PM_TIMER",
+ (unsigned long)freq / 1000,
+ (unsigned long)freq % 1000);
+
+ return;
+ }
+
/* Make sure we're within 1% */
if (abs(tsc_khz - freq) > tsc_khz/100)
goto out;
@@ -1407,8 +1430,10 @@ static int __init init_tsc_clocksource(void)
if (!boot_cpu_has(X86_FEATURE_TSC) || !tsc_khz)
return 0;
- if (tsc_unstable)
- goto unreg;
+ if (tsc_unstable) {
+ clocksource_unregister(&clocksource_tsc_early);
+ return 0;
+ }
if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3))
clocksource_tsc.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
@@ -1421,9 +1446,10 @@ static int __init init_tsc_clocksource(void)
if (boot_cpu_has(X86_FEATURE_ART))
art_related_clocksource = &clocksource_tsc;
clocksource_register_khz(&clocksource_tsc, tsc_khz);
-unreg:
clocksource_unregister(&clocksource_tsc_early);
- return 0;
+
+ if (!tsc_force_recalibrate)
+ return 0;
}
schedule_delayed_work(&tsc_irqwork, 0);
--
2.27.0