[PATCH v1 1/2] serial: 8250_dw: Use devm_add_action_or_reset()

[Andy Shevchenko]

Slightly simplify ->probe() and drop a few goto labels by using
devm_add_action_or_reset() for clock and reset cleanup.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_dw.c | 63 +++++++++++++++----------------
 1 file changed, 31 insertions(+), 32 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 7934e4658281..e7ef61899576 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -484,6 +484,16 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 	}
 }
 
+static void dw8250_clk_disable_unprepare(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static void dw8250_reset_control_assert(void *data)
+{
+	reset_control_assert(data);
+}
+
 static int dw8250_probe(struct platform_device *pdev)
 {
 	struct uart_8250_port uart = {}, *up = &uart;
@@ -585,35 +595,43 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (err)
 		dev_warn(dev, "could not enable optional baudclk: %d\n", err);
 
+	err = devm_add_action_or_reset(dev, dw8250_clk_disable_unprepare, data->clk);
+	if (err)
+		return err;
+
 	if (data->clk)
 		p->uartclk = clk_get_rate(data->clk);
 
 	/* If no clock rate is defined, fail. */
 	if (!p->uartclk) {
 		dev_err(dev, "clock rate not defined\n");
-		err = -EINVAL;
-		goto err_clk;
+		return -EINVAL;
 	}
 
 	data->pclk = devm_clk_get_optional(dev, "apb_pclk");
-	if (IS_ERR(data->pclk)) {
-		err = PTR_ERR(data->pclk);
-		goto err_clk;
-	}
+	if (IS_ERR(data->pclk))
+		return PTR_ERR(data->pclk);
 
 	err = clk_prepare_enable(data->pclk);
 	if (err) {
 		dev_err(dev, "could not enable apb_pclk\n");
-		goto err_clk;
+		return err;
 	}
 
+	err = devm_add_action_or_reset(dev, dw8250_clk_disable_unprepare, data->pclk);
+	if (err)
+		return err;
+
 	data->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
-	if (IS_ERR(data->rst)) {
-		err = PTR_ERR(data->rst);
-		goto err_pclk;
-	}
+	if (IS_ERR(data->rst))
+		return PTR_ERR(data->rst);
+
 	reset_control_deassert(data->rst);
 
+	err = devm_add_action_or_reset(dev, dw8250_reset_control_assert, data->rst);
+	if (err)
+		return err;
+
 	dw8250_quirks(p, data);
 
 	/* If the Busy Functionality is not implemented, don't handle it */
@@ -631,10 +649,8 @@ static int dw8250_probe(struct platform_device *pdev)
 	}
 
 	data->data.line = serial8250_register_8250_port(up);
-	if (data->data.line < 0) {
-		err = data->data.line;
-		goto err_reset;
-	}
+	if (data->data.line < 0)
+		return data->data.line;
 
 	/*
 	 * Some platforms may provide a reference clock shared between several
@@ -655,17 +671,6 @@ static int dw8250_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 
 	return 0;
-
-err_reset:
-	reset_control_assert(data->rst);
-
-err_pclk:
-	clk_disable_unprepare(data->pclk);
-
-err_clk:
-	clk_disable_unprepare(data->clk);
-
-	return err;
 }
 
 static int dw8250_remove(struct platform_device *pdev)
@@ -683,12 +688,6 @@ static int dw8250_remove(struct platform_device *pdev)
 
 	serial8250_unregister_port(data->data.line);
 
-	reset_control_assert(data->rst);
-
-	clk_disable_unprepare(data->pclk);
-
-	clk_disable_unprepare(data->clk);
-
 	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);
 
-- 
2.35.1